Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 217 - 240 of 1618 results:

Video:

Air Sealing Retrofits: Conducting an IR Camera Inspection of an Existing Home - Ceilings and Supply Grills

Video:

Air Sealing Retrofits: Conducting an IR Camera Inspection of an Existing Home - Fireplaces

Video:

Air Sealing Retrofits: Conducting an IR Camera Inspection of an Existing Home - Recess Lighting

Video:

Air Sealing Retrofits: Reduce Air Leakage at the Sill Plate with Canned Spray Foam

CAD File:

Air sealing wall between a porch roof and attic with 1 inch of rigid insulation

Preview Image
Air sealing wall between a porch roof and attic with 1 inch of rigid insulation
Image:

Air-Impermeable Insulation for Condensation Control in Unvented Attics, per IRC Table 806.5.

Air-Impermeable Insulation for Condensation Control in Unvented Attics, per IRC Table 806.5.
Image:

Air-seal the attic kneewall door opening with weatherstripping.

Air-seal the attic kneewall door opening with weatherstripping.
Image:

Air-sealing tape carefully seals the seams around the window framing.

Air-sealing tape carefully seals the seams around the window framing.
Image:

All ceiling, wall, floor, and slab insulation shall achieve RESNET-defined Grade I installation

All ceiling, wall, floor, and slab insulation shall achieve RESNET-defined Grade I installation
Presentation:

All Electric & Fossil Fuel Free: The Ultimate Z.E.N. Home

Image:

All other supply ducts and all return ducts in unconditioned space have insulation ≥ R-6

All other supply ducts and all return ducts in unconditioned space have insulation ≥ R-6
Image:

An indoor water heater should be secured to the wall’s studs to prevent it from moving or tipping over in the event of an earthquake

An indoor water heater should be secured to the wall’s studs to prevent it from moving or tipping over in the event of an earthquake
Image:

An installer fills the netted wall cavities with blown fiberglass.

An installer fills the netted wall cavities with blown fiberglass.
Image:

An installer fills these wall cavities with spray foam insulation, which will be trimmed flush with the stud faces after it dries and hardens.

An installer fills these wall cavities with spray foam insulation, which will be trimmed flush with the stud faces after it dries and hardens.
Image:

An insulation dam should surround the attic access and allow blown insulation to be installed to the required depth.

An insulation dam should surround the attic access and allow blown insulation to be installed to the required depth.
Image:

An insulation dam was constructed out of 2x8s that sit on ceiling joists for this attic access hatch.

An insulation dam was constructed out of 2x8s that sit on ceiling joists for this attic access hatch.
Image:

An IR camera image shows gaps around HVAC flue pipes allow conditioned air to leak through blown fiberglass into the attic

An IR camera image shows gaps around HVAC flue pipes allow conditioned air to leak through blown fiberglass into the attic
Image:

Angle support framing is added to brace a long gable overhang constructed using the ladder framing method.

Angle support framing is added to brace a long gable overhang constructed using the ladder framing method.
Video:

Application of Spray Foam Insulation Under Plywood and OSB Roof Sheathing

Presentation:

Are the Walls Closing In?

Are the Walls Closing In?
Video:

ASCE 37: Design Loads on Structures During Construction [E17a]

Image:

Assembled section of fiber board duct

Assembled section of fiber board duct
Image:

Assembly can be used in IECC CZ 3 and above to thermally isolate garages in multifamily row houses with slab foundations. For unheated garages, it is unnecessary to insulate wall between garage and exterior of slab or slab underneath garage.

Assembly can be used in IECC CZ 3 and above to thermally isolate garages in multifamily row houses with slab foundations. For unheated garages, it is unnecessary to insulate wall between garage and exterior of the slab or the slab underneath the garage.
Video:

Assembly Sequence for Concrete Crawl Space Wall with Exterior Insulation