Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 529 - 552 of 699 results:

Image:

This heated garage plenum is insulated along the bottom and sides, and the insulation is fully aligned with an air barrier. The insulation at the bottom of the plenum space meets IECC insulation requirements.

This heated garage plenum is insulated along the bottom and sides, and the insulation is fully aligned with an air barrier. The insulation at the bottom of the plenum space meets IECC insulation requirements.
Image:

This heated garage plenum space is insulated along its top, bottom and sides, and the insulation at the top of the plenum meets IECC requirements. The insulation along the top and sides is fully aligned with an air barrier.

This heated garage plenum space is insulated along its top, bottom and sides, and the insulation at the top of the plenum meets IECC requirements. The insulation along the top and sides is fully aligned with an air barrier.
Image:

This HRV, installed in a conditioned attic, provides balanced ventilation to the whole home

This HRV, installed in a conditioned attic, provides balanced ventilation to the whole home
Image:

This IR camera image of a multifamily building shows extensive thermal bridging at the floor slabs. (Windows appear dark because they are reflecting the cool night sky.)

This IR camera image of a multifamily building shows extensive thermal bridging at the floor slabs. (Windows appear dark because they are reflecting the cool night sky.)
Image:

This kneewall has no top plate and the resulting gap provides a wide-open pathway for air and vapor to travel between the living space and the attic

This kneewall has no top plate and the resulting gap provides a wide-open pathway for air and vapor to travel between the living space and the attic
Image:

This multistory multifamily building was constructed of insulated concrete forms (ICFs); synthetic stucco can be applied directly over the ICF

This multistory multifamily building was constructed of insulated concrete forms (ICFs); synthetic stucco can be applied directly over the ICF
Image:

This steel angle used for installing brick veneer on a multistory building is attached to the building with steel “clip” bracket supports that offset the angle from the framing to reduce thermal bridging and provide room for exterior insulation

This steel angle used for installing brick veneer on a multistory building is attached to the building with steel “clip” bracket supports that offset the angle from the building framing to reduce thermal bridging and provide room for exterior insulation
Image:

This technique for installing electrical wiring avoids the need to cut into the SIP panel

This technique for installing electrical wiring avoids the need to cut into the SIP panel
Image:

This wall assembly for above-grade garage walls uses cavity insulation and should only be used in IECC Climate Zones 4 or lower due to the risk of condensation on the interior surface of the concrete wall.

This wall assembly for above-grade garage walls uses cavity insulation and should only be used in IECC Climate Zones 4 or lower due to the risk of condensation on the interior surface of the concrete wall.
Presentation:

Thomas Phillips, HBI, New Abnormal: Adapting Buildings to More Extreme Heat and Power Outages

Thomas Phillips, HBI, New Abnormal: Adapting Buildings to More Extreme Heat and Power Outages
Image:

Three common ICF wall systems: the flat wall, the waffle wall, and the post-and-beam wall

Three common ICF wall systems: the flat wall, the waffle wall, and the post-and-beam wall
Presentation:

Tips for Installing a Weather Resistive Barrier

Image:

Two layers of high-permeability house wrap are installed to provide a drainage layer between the SIPS and the homes external cladding

Two layers of high-permeability house wrap are installed to provide a drainage layer between the SIPS and the homes external cladding
Image:

Two layers of XPS are installed with staggered seams over a liquid-applied membrane on the structural sheathing

Two layers of XPS are installed with staggered seams over a liquid-applied membrane on the structural sheathing
Image:

Typical installation of a double section modular home on a pier and ground anchor foundation

Typical installation of a double section modular home on a pier and ground anchor foundation
Image:

Unfaced fiberglass batt insulation is installed to completely fill the wall cavities and is sliced to fit around wiring, piping, and other obstructions in the wall cavities

Unfaced fiberglass batt insulation is installed to completely fill the wall cavities and is sliced to fit around wiring, piping, and other obstructions in the wall cavities
Image:

Use a smoke pencil to check for air leaks at SIP panel seams, especially along the ridge beam

Use a smoke pencil to check for air leaks at SIP panel seams, especially along the ridge beam
Image:

Use caulk, foam or equivalent material to seal gap between partition wall

Use caulk, foam or equivalent material to seal gap between partition wall
Image:

Use caulk, foam, or equivalent material to seal gap between common wall

Use caulk, foam, or equivalent material to seal gap between common wall
Image:

Use flashing tape to seal around any pipes or vents that penetrate through the foam

Use flashing tape to seal around any pipes or vents that penetrate through the foam
Image:

Utilities are commonly recessed into cutouts in the foam after concrete has been poured

Utilities are commonly recessed into cutouts in the foam after concrete has been poured
Image:

Vinyl frame window

Vinyl frame window
Image:

Walls are being assembled at this SIP house

Walls are being assembled at this SIP house
Image:

Well insulated slab

Well insulated slab