Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 1 - 24 of 880 results:

CAD File:

1 inch exterior insulation sheathing as attic eave baffle and vent

Preview Image
1 inch exterior insulation sheathing as attic eave baffle and vent
CAD File:

2 foot plan layout with wall elevation

Preview Image
2 foot plan layout with wall elevation
CAD File:

2-stud corner with 1x4 backer

Preview Image
2-stud corner with 1x4 backer
CAD File:

2-stud corner with drywall clips

Preview Image
2-stud corner with drywall clips
Video:

2012 IECC Code Level Insulation – DOE Zero Energy Ready Home Requirements

Video:

24 CFR Part 55 Floodplain Management and Wetlands Protection Rules Webinar

CAD File:

3-stud corner with rigid insulation

Preview Image
3-stud corner with rigid insulation
Image:

A 1- and ½-story home with a room located in the attic and the thermal boundary located at either a) the walls and ceiling of the attic room with small vented attic spaces or b) the roof line for an unvented attic

A 1- and ½-story home with a room located in the attic and the thermal boundary located at either a) the walls and ceiling of the attic room with small vented attic spaces or b) the roof line for an unvented attic
Image:

A blower door is installed in a doorway and is ready for testing

A blower door is installed in a doorway and is ready for testing
Image:

A builder meets with utility staff at a job site.

A builder meets with utility staff at a job site.
Image:

A central fan-integrated supply system uses a fresh air intake ducted to the home's central furnace or air handler unit to supply fresh air throughout the home

A central fan-integrated supply system uses a fresh air intake ducted to the home's central furnace or air handler unit to supply fresh air throughout the home
Image:

A central heat pump water heating system with a temperature maintenance swing tank configuration uses the water from the primary storage tank to provide most of the heat for hot water circulation temperature maintenance

A central heat pump water heating system with a temperature maintenance swing tank configuration uses the water from the primary storage tank to provide most of the heat for hot water circulation temperature maintenance
Presentation:

A Cost-Effective Path to Healthy, Affordable, Net Zero Housing with DOE’s ZER Program

Image:

A crane is used to install the SIP fireplace chimney chase

A crane is used to install the SIP fireplace chimney chase
Video:

A Cup of Joe: Below Grade Water Control | Building Science Deconstructed

Image:

A direct-vent sealed-combustion fireplace takes its combustion air directly from outside through a dedicated air inlet and vents combustion products directly outside

A direct-vent sealed-combustion fireplace takes its combustion air directly from outside through a dedicated air inlet and vents combustion products directly outside
Image:

A flanged window unit is installed with straps that fasten to the interior surfaces of the plywood extension box; furring strips on each side of the window will be attached after the flanged window is installed and flashed

A flanged window unit is installed with straps that fasten to the interior surfaces of the plywood extension box; furring strips on each side of the window will be attached after the flanged window is installed and flashed
Image:

A floor cavity between the first and second floor can provide a conditioned space for HVAC ducts if the rim joists are insulated and air sealed, if sufficient space is available, and if open-web floor joists are used

A floor cavity between the first and second floor can provide a conditioned space for HVAC ducts if the rim joists are insulated and air sealed, if sufficient space is available, and if open-web floor joists are used
Image:

A home is tested at two points for enclosure air leakage

A home is tested at two points for enclosure air leakage
Image:

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic

A low-sloped shed roof with the thermal boundary located at either a) the flat ceiling with a vented attic or b) the roof line for an unvented attic
Image:

A pumper is used to place the concrete into the foam form walls

A pumper is used to place the concrete into the foam form walls
Image:

A site-built rafter roof with a raised top plate allows for more insulation underneath.

A site-built rafter roof with a raised top plate allows for more insulation underneath.
Image:

A standard site-built roof of rafters may pinch the insulation at the eaves

A standard site-built roof of rafters may pinch the insulation at the eaves
Image:

A structural spline made of a solid 2x is used where needed to meet structural load requirements at SIP panel seams

A structural spline made of a solid 2x is used where needed to meet structural load requirements at SIP panel seams