Skip to main content

Resources

Explore a library of home construction and renovation guidance and easily search through galleries containing hundreds of building science-related photos, drawings, videos, CAD files, case studies, and presentations.

Filter

View Library

Showing 505 - 528 of 744 results:

Image:

Seal all wood framing joints surrounding the chase with sealant and lay a bead of sealant on top edge of chase framing

Seal all wood framing joints surrounding the chase with sealant and lay a bead of sealant on top edge of chase framing
Image:

Seal the drywall to the top plates as part of the home’s continuous air barrier

Seal the drywall to the top plates as part of the home’s continuous air barrier
Image:

Siding has been removed so cellulose insulation can be dense-packed into the exterior walls of this home

Siding has been removed so cellulose insulation can be dense-packed into the exterior walls of this home
Image:

Single framed wall converted to double wall and insulated with closed-cell spray foam

Single framed wall converted to double wall and insulated with closed-cell spray foam
Image:

Single framed wall converted to double wall and insulated with closed-cell spray foam and loose-fill fibrous insulation

Single framed wall converted to double wall and insulated with closed-cell spray foam and loose-fill fibrous insulation
Image:

Single framed wall converted to double wall and insulated with open-cell spray foam

Single framed wall converted to double wall and insulated with open-cell spray foam
CAD File:

Single top plate - interior wall with gusset

Preview Image
Single top plate - interior wall with gusset
CAD File:

Single top plate splice with metal plate

Preview Image
Single top plate splice with metal plate
CAD File:

Single top plate with centered joint splice

Preview Image
Single top plate with centered joint splice
Image:

SIP panel walls are less susceptible to air leakage and convection issues than stick-built walls

SIP panel walls are less susceptible to air leakage and convection issues than stick-built walls
Image:

SIP panels should be stacked high, dry, and flat

SIP panels should be stacked high, dry, and flat
CAD File:

Site-built insulated header

Preview Image
Site-built insulated header
Image:

Slab independent of foundation wall

Slab independent of foundation wall
Image:

Smoke generators are used to identify air leakage sites during depressurization testing

Smoke generators are used to identify air leakage sites during depressurization testing
Image:

Special molded corners provide continuous insulation layer at the corners to improve structural strength and minimize thermal bridging

Special molded corners provide continuous insulation layer at the corners to improve structural strength and minimize thermal bridging
Video:

Split and Notch Batts to Fit around Wires and Electrical Boxes

Image:

Spray foam air seals the boot to the ceiling

Spray foam air seals the boot to the ceiling
Image:

Spray foam insulation is installed in open wall cavities to air seal and insulate

Spray foam insulation is installed in open wall cavities to air seal and insulate
Image:

Spray foam provides a critical seal between the subfloor, rim joist, and sill plate

Spray foam provides a critical seal between the subfloor, rim joist, and sill plate
Image:

Standard roof trusses are narrow at the eaves, preventing full insulation coverage over the top plate of the exterior walls

Standard roof trusses are narrow at the eaves, preventing full insulation coverage over the top plate of the exterior walls
CAD File:

Structured insulated panels (SIPS) as band joist

Preview Image
Structured insulated panels (SIPS) as band joist
Image:

Stucco is installed over rigid insulation, which is installed over a drainage plane consisting of a drainage gap and building wrap layer over the sheathing

Stucco is installed over rigid insulation, which is installed over a drainage plane consisting of a drainage gap and building wrap layer over the sheathing
Image:

Table of interior vapor retarder requirements based on climate zone and retarder class; no interior retarder is recommended in zones 6-8, and class II is acceptable for all other zones.

Table of interior vapor retarder requirements based on climate zone and retarder class; no interior retarder is recommended in zones 6-8, and class II is acceptable for all other zones.
Case Study:

Technology Solutions Case Study: Complete and Fully Aligned Air Barrier