Library

Standard describing a test method for mold growth resistance on interior coatings such as paint in an environmental chamber; the 2021 version of this standard is available for preview and purchase at the referenced link.

Test method providing a rapid means of determining the steady-state thermal transmission properties of thermal insulations and other materials with a high level of accuracy when the apparatus has been calibrated appropriately. This version of the standard was published in the year 2021 and is...

Website providing information on all types of pest management for multi-family housing.

Bill requiring the Consumer Product Safety Commission to revise the safety standards for freestanding clothing storage units such as a dressers, bureaus, or chests of drawers to include testing related to tip overs and new warning requirements for all such products entering the U.S. market; passed...

Article defining structural design loads and ways to calculate them, including dead loads, live loads, soil lateral loads, wind loads, snow loads, earthquake loads, and other loads.

Presentation on sustainable development including water conservation, passive solar, daylighting, natural ventilation, and land use.

Report presenting safe room designs and showing the homeowner and builder/contractor or local design professional how to construct a safe room for a home or small business.

A story about bees building a hive in the drainage plane behind the brick veneer siding. The bees entered the wall through unprotected drainage holes.

Article describing identification of termite infestations in homes and treatment options.

DOE-sponsored report describing the experimental design and results of testing the energy performance of Hunter Douglas double-cell cellular shades under various control schemes in the Pacific Northwest National Laboratory’s Lab Homes.

Article from Texas A&M University and the University of Maryland analyzing why and how urban flooding happens and what can be done to mitigate damage.

Conference paper summarizing the relative performance of currently available Heat Pump Water Heaters (HPWH) models, the energy implications of different installation locations (garage, basement, or conditioned space) and ducting configurations (exhaust ducting, full ducting, or no ducting), as well...

Study comparing the thermal performance of phase change materials to concrete construction during heat waves.

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.

Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces; is the current version of the standard, which was published in the year 2021, and is available for preview and purchase at the...

Guide from Energy Star on smart thermostats and offering some guidance for choosing one.

Online course describing the behavior of wildfires for firefighters.

NAFA’s user guide for understanding ANSI/ASHRAE Standard 52.2-2012.

Documents describing Flood Resistant Provisions of codes published by the International Association of Plumbing and Mechanical Officers (IAPMO): the Uniform Mechanical Code; Uniform Plumbing Code; Uniform Swimming Pool, Spa and Hot Tub Code; and Uniform Solar, Hydronics and Geothermal Code (Uniform...

Webpage from Southern California Earthquake Center (SCEC) on identifying key problem spots on unreinforced masonry chimneys and how to retrofit them to withstand seismic forces.

EPA WaterSense guidance on urinals.

A reference guide providing basic tips on using backup generators safely and effectively.

Article describing a method for flashing roof vent boots, describing how to flash the pipe, how to flash over and under the pan, and finish by shaping the shingles, as well as addressing potential water leakage by adding an additional seal with EPDM flashing tape with a butyl adhesive backing to the...

Website describing proper methods for installing vinyl siding on homes.

Article describing ways to construct or retrofit a home to increase is resistance to high winds, hurricanes, and tornadoes.

A website providing information on sealing the home against rodents and how to trap rodents once they have made their way into the home.

A info sheet providing information on ENERGY STAR certified water heaters and the various criteria water heaters must undergo to become ENERGY STAR certified, including metrics on efficiency and performance.

A San Diego County standard outlining the requirements for installing fire protection water tanks.

Resource that provides a directory of individuals that have successfully completed all requirements of at least one WaterSense Approved Certification Method (WACM) through a Home Certification Organization (HCO).

Fact sheet describing how the Environmental Protection Agency ensures labeled homes meet the WaterSense efficiency requirements for whole house water management including a list of requirements and a data chart.

Document on the EPA WaterSense webpage describing the technical evaluation process used by EPA WaterSense to authorize home certification organizations to certify homes through the WaterSense program.

Webpage from NW Natural on how to prepare homes with natural gas service for earthquakes and floods, what to do during an emergency, and how to respond after the emergency has passed.

An overview of impacts from weather, climate, and water extremes globally from 1970 to 2019 based on disaster data from the Emergency Events Database (EM-DAT)

A website explaining the connection between using compact fluorescent lightbulbs and the amount of mercury released into the environment.

Information sheet outlining the criteria for ENERGY STAR qualified, windows, doors, and skylights.

Guidelines from IBHS on modifications to homes to prepare for a wildfire if evacuation orders are anticipated for the area.

Webpage describing how different amounts and types of snow loads affect the structural integrity of roofs and homes.

Webpage describing the Wildland Urban Interface (WUI) and how to plan residential building to mitigate wildfire risks associated with building in the WUI.

Webpage from USFA compiling resources from across the U.S. on Wildland Urban Interface (WUI) information.

Webpage from USDA and U.S. Forest Service with a map of potential wildfire risk across the U.S.

Website describing how wildfires spread and how fuels, weather, and topography influence fires.

Webpage describing ways builders and communities an reduce wildfire risk.

A webpage providing guidance on increasing the wildfire resistance of a home.

A website created by the U.S. Forest Service, containing interactive maps, charts and resources to help communities explore their risk to wildfires.

Study analyzing wind pressures on hip roofs where two hip roofs come together forming an L or T shaped roof or building.

Guide describing "wind safe” room as a reinforced area of a home designed to withstand severe windstorms.

DOE presentation describing a project to study window attachments.