Library

Factsheet describing re-siding retrofits containing exterior insulation and window upgrades aimed at improved energy savings and comfort.

Factsheet describing tips for building or renovating with a focus on disaster resistance.

Factsheet describing the performance criteria and key components of DOE Zero Energy Ready homes.

Factsheet describing the importance of building enclosures and their impact on energy efficiency.

Factsheet outlining the advantages of using heat pumps, which are an efficient way to heat and cool a home.

Factsheet outlining how window attachments like cellular shades, roller shades, storm windows with low-emissivity coatings, and solar screens are low-cost steps that can be implemented to keep homes cool in the summer.

Webpage containing a library of ready-to-use social media posts, graphics and video links that promote life-saving information about how individuals and families can prepare for and survive during a hurricane.

Website detailing how to prepare for, stay safe during, and return home after hurricanes.

Webpage providing curriculum with links to presentations and problem sets for teaching an understanding of sizing cold climate heat pumps.

Standards criteria supporting ICC HVAC duct support standards.

Report summarizing the status of a central hydronic heating system project in multifamily housing at the conclusion of the 20112012 heating season.

Recommendations from IBHS describing how to safely use generators during winter storm power outages.

The study described in this white paper is based on building energy modeling with an important focus on the indoor humidity impacts of ventilation.

PDF detailing the inspection and verification guidance for WaterSense labeled new homes including indoor and outdoor efficiency requirements, and homeowner and building management education.

Webpage describing current and past versions of the International Mechanical Code (IMC), code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related...

Webpage containing all editions of the International Residential Code (IRC), code for residential buildings that creates minimum regulations for one- and two-family dwellings of three stories or less, bringing together all building, plumbing, mechanical, fuel gas, energy and electrical provisions...

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Research report discussing the reduction of HVAC energy consumption to meet U.S. greenhouse gas targets and DOE's energy-efficient building goals. It introduces iComfort, an IoT-based system for optimizing home comfort and energy savings.

Guidance on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

Website describing best practices for minimizing exposure to lead while doing repairs and renovations in homes built in 1978 or earlier.

A website explaining why homeowners should install ENERGY STAR certified lightbulbs, which helps to save homeowners on utility bills and protect the environment.

Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This measure guideline provides guidance on combustion safety inspection procedures for appliances and heating equipment that use indoor air for combustion and dilution of flue gases in low-rise residential buildings.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Measure Guideline research report providing simple, long term, and durable solutions when using tapes and flashing membranes in conjunction with the exterior face of rigid polymeric foam sheathing to create the drainage plane of a wall system.

Case study about how to properly tape insulating sheathing drainage planes.

Guideline describing information and specifications relevant to air-seal existing attics.

Report describing recommendations for optimizing flexible duct, constant-volume HVAC systems using junction boxes.

This document addresses adding—or improving—mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes either directly or by dilution. This report discusses where, when, and how much ventilation is appropriate in a home, including some...

Report describing solutions for supplemental dehumidification in warm-humid climates.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

This report investigates whether mini-split heat pumps can live up to their potential for one market segment: multifamily retrofits.

Website describing Minnesota Power’s New Construction Energy Efficiency program that promotes building practices and technologies that enhance new residential construction.

Practical guide describing the management of moisture during a building's design, construction and maintenance.

Report on the use of vapor diffusion ports to reduce moisture issues with buried ductwork in unvented attics in hot-humid climates.

List of products approved by the Master Painters Institute.

This standard provides a benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards and has been adopted in all 50 states.

An article about double-hung windows.

Code providing minimum safety requirements for the design and installation of fuel gas piping systems in homes and other buildings.

Report presenting performance results from tests conducted on an energy efficiency retrofit project in Stockton, California.

Information sheet providing guidance about the placement of ventilation approaches.

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

Article describing airflow within buildings due to pressure differences.

Webpage from DOE describing how to conserve energy and save money with a home energy audit.

Case study describing the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Website from the EPA containing information for homeowners and renters about how to identify asbestos in the home and how to deal with it to reduce exposure to it.

Webpage describing the Quality Install Tool, an open-source web app designed to simplify, standardize, and expedite the creation of high-quality installation documentation for HVAC installations and efficiency upgrades.