Library

Information sheet about exterior insulation in the hot-dry climate zones.

Information sheet about HVAC equipment design to maximize energy efficiency in the hot-dry climate zone.

Information sheet describing solar PV upgrade for an existing homes.

Information sheet describing tankless hot water heating systems in existing homes.

Information sheet describing solar hot water systems in existing homes.

Information about a roof retrofit using a metal, cool roof system.

Information sheet describing tankless hot water heating systems in existing homes.

Information sheet about envelope and roof moisture control retrofit for a home.

Information sheet about window retrofit strategies for hot-dry climates.

Fact sheet describing proper roof sheathing installation and illustrating fastening methods that will enhance the durability of a building in high-wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Fact sheet describing recommended practices for the use of roofing underlayment as an enhanced secondary water barrier in coastal environments and optional installation methods; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Fact sheet describing the importance of proper roof and deck flashing, and typical and enhanced flashing techniques for coastal homes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Article explaining the energy cost reduction and other benefits associated with installing a heat pump clothes dryer

Research report detailing Florida Solar Energy Center (FSEC) partnership with Manatee County Habitat for Humanity to design a compact, Zero Energy Ready Home in Florida, tackling challenges like equipment sizing and indoor air quality, offering insights for projects surpassing building code...

Article describing how insulating and air sealing unfinished attic spaces can lead to reduced energy bills in some homes.

Fact sheet describing guidance concerning lot selection and building siting considerations for coastal residential buildings, including factors that constrain siting decisions, coastal setback lines, common siting problems, and suggestions for builders, designers, and owners; also published in FEMA...

Report comparing the performance of seven differing types of residential water heating systems in a side-by-side test configuration over a full year period.

Fact sheet describing basic design and installation tips for various types of siding for high-wind regions, including vinyl, wood, and fiber cement and discusses sustainable design issues; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Information sheet describing how to select a properly sized water heater based on household usage patterns, peak demand, and heater type—whether tankless, solar, or storage-based—to ensure efficiency and adequate hot water supply.

Webpage describing the STEP campaign encouraging the use of smart diagnostic tools to reduce installation faults.

ASTM designation regarding two radon control options for low-rise residential building construction. This standard was produced in the year 2008, and is available for preview and purchase at the reference link.

Detailed requirements for testing, exposure modeling, and allowable limits for modeled indoor air concentrations.

The Standard Work Specifications (SWS) are a tool for industry guidance to ensure effective, durable, and safe work is performed during home upgrades.

Webpage providing information how to deal with rodents by knowing what they look like, where they live, and what they do.

Discussion of building sheathing.

Fact sheet describing recommendations for exceeding NFIP regulatory requirements for new construction and for repairs, remodeling, and additions, including building foundations, enclosures below the Base Flood Elevation (BFE), use of nonstructural fill, use of space below the BFE, utilities...

The Technician's Guide equips practitioners with the knowledge to properly implement all of the measurement procedures required in the HVAC QI Specification.

Research study exploring retrofit procedures and simulated post-occupancy data for three homes in an effort to determine the effectiveness of retrofit packages.

Conference proceedings from the 2018 ACEEE Summer Study on Energy Efficiency in Buildings that highlights efforts to expand energy efficiency adoption, address barriers across market sectors, and introduce a new focus on energy equity for underserved communities.

Article describing the perfect wall and and in what order to control rain, air, vapor, and heat.

Even as the worst housing market correction in more than 60 years appeared to turn a corner in 2009, the fallout from sharply lower home prices and high unemployment continued.

Fact sheet outlining best design and construction practices for tile roofing in high wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Website providing consumer tips for using natural gas safely in the home, including guidance on cooking, fireplaces, ventilation, pilot lights, piping, etc.

Article describing tips for effectively installing weatherstripping on windows and doors.

Brochure describing HVAC filter options for efficiency and IAQ.

A report examining the presence, reliability, effectiveness, and impact of sprinkler systems in structure fires.

Report describing actions home and business owners can take to deal with underground storage tanks that are displaced by flood waters and preventative steps they can take to reduce the likelihood of tank displacement in the future.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Users guide to help contractors and homeowners use the Cold Climate Heat Pump Sizing Support Tools developed by NEEP to size and select the best air source heat pumps for their cold climate location.

Fact sheet describing the purpose of Flood Insurance Rate Maps (FIRMs) and Digital Flood Insurance Rate Maps (DFIRMs), how to obtain FIRMs, DFIRMs, and Flood Insurance Studies (FISs), and highlighting features that are important to coastal builders, including flood zones and flood elevations;; also...

Fact sheet describing the certification requirements for structural design and methods of construction in V Zones; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Research report that validates Pinhole Insulation®, offering a cost-effective, minimally invasive solution for enhancing insulation and air sealing in enclosed roof cavities, improving R-value by 60% compared to traditional methods.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2010, and is available for...

This report examines indoor air quality in post-2013 homes across various climates, focusing on contaminant levels, ventilation equipment usage, and control measure impact, with regional data from Florida, Georgia, and South Carolina.

Standard that provides expanded and updated requirements for producing, marketing, and specifying plywood for construction and industrial uses.

State building energy code for the State of Washington.

State code requiring energy efficiency measures in residential buildings.

Website containing useful resources regarding central heat pump water heater systems.

AIA CEU course covering design considerations for below-grade waterproofing for new construction, the types of below-grade systems available, and specific concerns associated with waterproofing deep foundations.

Article describing an overview of weatherstripping requirements.