Library

Report identifying the important aspects of building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

Manual describing the installation process for Craneboard insulated vinyl siding; while installation is similar across insulated vinyl siding products, see manufacturers for specific guidance.

Handheld solar site analysis tool capturing whole-horizon images for a site and generating shading analysis reports.

Standard establishing requirements for the performance and installation of gasketing systems including mortised to doors, frames or both which was published in the year 2021 and a can be purchased to be viewed in full from the ANSI webstore in the link.

Standard describing methods for installing radon mitigation systems in existing residential buildings three stories or less in height which was published in the year 2021 and is available for preview and purchase at the reference link.

Standard specification covering elastomeric cellular preformed gasket and sealing materials. This version of the standard was published in the year 2021 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2015, 2011, 2006, and...

ASTM standard for wood-composite decking and guardrail materials under a variety of tests, including fire performance and UV resistance. Available for preview and purchase at the reference link.

Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa which was published in the year 2021 and is available for preview and purchase at the reference link.

Standard describing a test method for mold growth resistance on interior coatings such as paint in an environmental chamber; the 2021 version of this standard is available for preview and purchase at the referenced link.

Test method providing a rapid means of determining the steady-state thermal transmission properties of thermal insulations and other materials with a high level of accuracy when the apparatus has been calibrated appropriately. This version of the standard was published in the year 2021 and is...

Information sheet about buried ducts.

Bill requiring the Consumer Product Safety Commission to revise the safety standards for freestanding clothing storage units such as a dressers, bureaus, or chests of drawers to include testing related to tip overs and new warning requirements for all such products entering the U.S. market; passed...

Article defining structural design loads and ways to calculate them, including dead loads, live loads, soil lateral loads, wind loads, snow loads, earthquake loads, and other loads.

Document describing issues of wind pressure resistance in walls with exterior rigid foam sheathing installed directly over framing members.

Report presenting safe room designs and showing the homeowner and builder/contractor or local design professional how to construct a safe room for a home or small business.

Article describing identification of termite infestations in homes and treatment options.

Study comparing the thermal performance of phase change materials to concrete construction during heat waves.

Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.

Paper describing the effects of shade trees and their location on residential summertime electricity usage.

Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces; is the current version of the standard, which was published in the year 2021, and is available for preview and purchase at the...

Guide from Energy Star on smart thermostats and offering some guidance for choosing one.

Report presenting information that aids qualified architects and engineers in the identification of the best available refuge areas in existing buildings for sheltering in place during a tornado.

Online course describing the behavior of wildfires for firefighters.

Information sheet describing transfer ducts and grilles for HVAC.

Documents describing Flood Resistant Provisions of codes published by the International Association of Plumbing and Mechanical Officers (IAPMO): the Uniform Mechanical Code; Uniform Plumbing Code; Uniform Swimming Pool, Spa and Hot Tub Code; and Uniform Solar, Hydronics and Geothermal Code (Uniform...

Webpage from Southern California Earthquake Center (SCEC) on identifying key problem spots on unreinforced masonry chimneys and how to retrofit them to withstand seismic forces.

Report covering wind uplift and roofing membrane failures.

EPA WaterSense guidance on urinals.

Article describing how adhesives can be used to make homes in high-wind locations stronger and how adhesives could be too effective resulting in overloading foundation anchors under earthquake loads.

A reference guide providing basic tips on using backup generators safely and effectively.

A review on the knowledge about ventilated wall claddings from field performance and hydrothermal modeling.

Information sheet about proper ventilation and air sealing.

Article describing ways to construct or retrofit a home to increase is resistance to high winds, hurricanes, and tornadoes.

Document describing wall bracing techniques and suggestions for the city of Verona, WI building department.

A website providing information on sealing the home against rodents and how to trap rodents once they have made their way into the home.

A info sheet providing information on ENERGY STAR certified water heaters and the various criteria water heaters must undergo to become ENERGY STAR certified, including metrics on efficiency and performance.

Resource that provides a directory of individuals that have successfully completed all requirements of at least one WaterSense Approved Certification Method (WACM) through a Home Certification Organization (HCO).

Fact sheet describing how the Environmental Protection Agency ensures labeled homes meet the WaterSense efficiency requirements for whole house water management including a list of requirements and a data chart.

Document on the EPA WaterSense webpage describing the technical evaluation process used by EPA WaterSense to authorize home certification organizations to certify homes through the WaterSense program.

Webpage from NW Natural on how to prepare homes with natural gas service for earthquakes and floods, what to do during an emergency, and how to respond after the emergency has passed.

An overview of impacts from weather, climate, and water extremes globally from 1970 to 2019 based on disaster data from the Emergency Events Database (EM-DAT)

Report describing sloped roof assemblies with high levels of thermal performance.

A website explaining the connection between using compact fluorescent lightbulbs and the amount of mercury released into the environment.

Information sheet outlining the criteria for ENERGY STAR qualified, windows, doors, and skylights.

Guidelines from IBHS on modifications to homes to prepare for a wildfire if evacuation orders are anticipated for the area.

Information sheet discussing the differences between homeowner energy consumption trends in highly efficient homes.

Webpage describing how different amounts and types of snow loads affect the structural integrity of roofs and homes.

Document describing different spray foam materials including some pros and cons and technical specifications.