Library

Information sheet describing solar hot water systems in existing homes.

Information about a roof retrofit using a metal, cool roof system.

Information sheet describing tankless hot water heating systems in existing homes.

Information sheet about envelope and roof moisture control retrofit for a home.

Information sheet about window retrofit strategies for hot-dry climates.

Fact sheet describing proper roof sheathing installation and illustrating fastening methods that will enhance the durability of a building in high-wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Fact sheet describing recommended practices for the use of roofing underlayment as an enhanced secondary water barrier in coastal environments and optional installation methods; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Fact sheet describing the importance of proper roof and deck flashing, and typical and enhanced flashing techniques for coastal homes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Article describing how insulating and air sealing unfinished attic spaces can lead to reduced energy bills in some homes.

Fact sheet describing guidance concerning lot selection and building siting considerations for coastal residential buildings, including factors that constrain siting decisions, coastal setback lines, common siting problems, and suggestions for builders, designers, and owners; also published in FEMA...

Report comparing the performance of seven differing types of residential water heating systems in a side-by-side test configuration over a full year period.

Fact sheet describing basic design and installation tips for various types of siding for high-wind regions, including vinyl, wood, and fiber cement and discusses sustainable design issues; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

ASTM designation regarding two radon control options for low-rise residential building construction. This standard was produced in the year 2008, and is available for preview and purchase at the reference link.

Detailed requirements for testing, exposure modeling, and allowable limits for modeled indoor air concentrations.

Discussion of building sheathing.

Fact sheet describing recommendations for exceeding NFIP regulatory requirements for new construction and for repairs, remodeling, and additions, including building foundations, enclosures below the Base Flood Elevation (BFE), use of nonstructural fill, use of space below the BFE, utilities...

The Technician's Guide equips practitioners with the knowledge to properly implement all of the measurement procedures required in the HVAC QI Specification.

Research study exploring retrofit procedures and simulated post-occupancy data for three homes in an effort to determine the effectiveness of retrofit packages.

Article describing the perfect wall and and in what order to control rain, air, vapor, and heat.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Even as the worst housing market correction in more than 60 years appeared to turn a corner in 2009, the fallout from sharply lower home prices and high unemployment continued.

Fact sheet outlining best design and construction practices for tile roofing in high wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Report describing actions home and business owners can take to deal with underground storage tanks that are displaced by flood waters and preventative steps they can take to reduce the likelihood of tank displacement in the future.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Fact sheet describing the purpose of Flood Insurance Rate Maps (FIRMs) and Digital Flood Insurance Rate Maps (DFIRMs), how to obtain FIRMs, DFIRMs, and Flood Insurance Studies (FISs), and highlighting features that are important to coastal builders, including flood zones and flood elevations;; also...

Fact sheet describing the certification requirements for structural design and methods of construction in V Zones; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Building science report describing issues with vented attics in hot-humid climates and how sealed attic construction may be a solution.

Report describing the formation of icicles and ice dams along poorly ventilated roofs and how to mitigate ventilation issues with insulation and vents.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2010, and is available for...

Standard that provides expanded and updated requirements for producing, marketing, and specifying plywood for construction and industrial uses.

Factsheet describing the importance of system charging, superheat and subcooling.

Report providing guidance on how to improve the wind resistance of existing residential buildings in Mississippi and across the Gulf Coast.

Fact sheet describing flashing detail concepts for window and door openings that provide adequate resistance to water intrusion in coastal environments, do not depend solely on sealants, are integral with secondary weather barriers (e.g., housewrap), and are adequately attached to the wall...

Fact sheet describing the moisture properties of wood.

A hurricane retrofit guide describing techniques for strengthening roof-to-wall connections for family homes.

Report summarizing information on wood as an engineering material, and presents properties of wood and wood-based products of particular concern to the architect and engineer.

Fact sheet describing typical wood-pile-to-beam connections; basic construction guidance for various connection methods, including connections for misaligned piles; and pile bracing connection techniques; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact...

Research study describing demonstration homes that provided a wealth of information for the building community in terms of the science, effort, and cost of increasing the energy efficiency of our nation's housing stock.