Library

Standard outlining industry procedure for sizing residential duct systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Standard covering sizing strategies for all types of cooling and heating equipment, as well as how to use comprehensive manufacturer’s performance data on sensible, latent, or heating capacity for various operating conditions.

Report providing guidance on wet floodproofing crawlspaces, unfinished basements, and garages.

Document providing guideance and considerations for duct design in an energy efficient house.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Fact sheet describing basement insulation considerations.

Information sheet describing techniques for insulating basements.

YouTube channel featuring 90+ videos to educate Bay Area homeowners and contractors about seismic retrofitting, including information for various home and construction types.

Technical report detailing a study in which actual cooling loads are compared to modeled cooling loads.

Information guide describing issues with concrete floors, in multiple climate zones.

Information sheet about crawlspace insulation, including installation details.

Report identifying two barriers that limit the ability of builders to explore opportunities for higher levels of energy efficiency in housing: the use of duct system materials that inherently achieve airtightness and are right-sized for low-load houses, and, the ability to air seal fire separation...

Article describing a case study in which a whole-house battery and PV system was tested in a home with cooling and refrigeration during a hurricane in Florida.

Report analyzing results in crawlspace retrofits in multifamily buildings.

Article explaining what a continuous load path is and the key connection points that make it up.

Article describing methods to manage moisture, rainwater, and vapor in basements and crawlspaces.

Handbook providing guidance on the design and construction of foundations for homes, including insulation, air sealing, and water management details for basements, crawlspaces, and slabs.

Article describing what the building codes say about frost-protected shallow foundations as a cost-saving alternative to conventional concrete foundations.

Guides describing frost-protected shallow foundations as an alternative method for building an energy-efficient foundation for a house in a cold climate that uses less concrete and saves on labor.

Article describing frost-protected shallow foundations with construction drawing details.

Guide by the Northeast Energy Efficiency Partnerships on how to size heat pumps in a cold climate.

Presentation about proper installation of flexible ducts.

Brochure describing FEMA documents and foundation tips for floodproofing homes.

Blog entry describing methods for insulating basement walls on the interior or exterior.

An article and video of a breakdown on the preparation and installation of basement insulation.

Report outlining results from a 2005 hygrothermal pilot study in the South.

Central return designs require an open pathway between the room and the heart of the house where the return grill is located.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Article describing what evaporative coolers are, how they work, different types, performance, where they are appropriate, and how to install and maintain them.

Information sheet providing links and resources for insulating basements in cold climates.

Document describing good practices for insulating basements in new and existing homes.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Document providing information on basement insulation, air sealing and water management retrofits.

Document describing guidance and requirements for flood openings in walls at and below grade.

Information sheet including a checklist of steps to follow for pouring concrete.

Website providing information about how to keep the properties rat-free and address conditions that can lead to rats.

Report describing how to construct a frost protected shallow foundation (FPSF) as a practical alternative to a deeper, more-costly foundation in cold regions with seasonal ground freezing and the potential for frost heave.

Information sheet describing how to select a properly sized water heater based on household usage patterns, peak demand, and heater type—whether tankless, solar, or storage-based—to ensure efficiency and adequate hot water supply.

A website providing information on how to properly size a water heater based on tank size, volume, peak hour demand and other factors.

Web page describing the basics of how to size and build a battery bank for electricity storage.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Website providing information on all types of pest management for multi-family housing.

Research project evaluating the pre-and post-retrofit energy consumption of a marine climate retrofit, compare actual energy use to original predictions, and identify opportunities for cost savings in other similar retrofits in this climate.

Report presenting information that aids qualified architects and engineers in the identification of the best available refuge areas in existing buildings for sheltering in place during a tornado.

Information sheet with methods for constructing or retrofitting basements to reduce moisture issues.

Presentation describing the challenges of insulating an existing basement, presented to the Building America residential energy-efficiency stakeholder meeting.

Users guide to help contractors and homeowners use the Cold Climate Heat Pump Sizing Support Tools developed by NEEP to size and select the best air source heat pumps for their cold climate location.

Conference paper presented at the 8th International Conference on Thermal Performance of Exterior Envelopes of Whole Buildings describing moisture from basements and crawlspaces as a source of indoor humidity and providing recommendations for finishing below-grade spaces to limit potential indoor...