Library

2012 edition of code establishing a baseline for the design and installation of fuel gas systems and gas fired appliances through performance requirements.

2012 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

2015 edition of code establishing minimum regulations for mechanical systems, including heating, cooling, ventilation, exhaust, ducts, fireplaces, combustion and hydronic systems, using prescriptive and performance-related provisions.

Fact sheet providing an overview of FEMA P-348, Protecting Building Utility Systems From Flood Damage.

The manual covers residential zoning issues - multiple, single-zone, and central multi-zone systems - and includes advice on working with homeowners to adapt the heating or cooling system design to meet modern home design features.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

Report providing guidance on wet floodproofing crawlspaces, unfinished basements, and garages.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Fact sheet describing basement insulation considerations.

Information sheet describing techniques for insulating basements.

YouTube channel featuring 90+ videos to educate Bay Area homeowners and contractors about seismic retrofitting, including information for various home and construction types.

Information guide describing issues with concrete floors, in multiple climate zones.

The main principle of smart ventilation used in this study is to shift ventilation from time periods with large indoor-outdoor temperature differences, to periods where these differences are smaller, and their energy impacts are expected to be less.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

Web article describing the evolution of evaporative coolers, water usage of evaporative coolers, and links to information on selecting an evaporative cooler.

Article describing benefits of ECM motors and how they can be installed as retrofit motors in HVAC equipment.

Article explaining what a continuous load path is and the key connection points that make it up.

Documents describing Flood Resistant Provisions of the international codes (including the international building, residential, exiting building, mechanical, plumbing, fuel gas, fire, swimming pool and spa, private sewage disposal, and code council performance codes) and summaries of changes from the...

Document describing ASCE 24-14 Flood Resistant Design and Construction changes and highlights, on topics including siting, materials, performance, and utilities.

Article describing methods to manage moisture, rainwater, and vapor in basements and crawlspaces.

Handbook providing guidance on the design and construction of foundations for homes, including insulation, air sealing, and water management details for basements, crawlspaces, and slabs.

Article describing what the building codes say about frost-protected shallow foundations as a cost-saving alternative to conventional concrete foundations.

Guides describing frost-protected shallow foundations as an alternative method for building an energy-efficient foundation for a house in a cold climate that uses less concrete and saves on labor.

Article describing frost-protected shallow foundations with construction drawing details.

Brochure describing FEMA documents and foundation tips for floodproofing homes.

Report presenting construction methods, building products, appliances and equipment of four single-family houses that achieve dramatic energy reductions and approach “net zero energy” use.

Blog entry describing methods for insulating basement walls on the interior or exterior.

An article and video of a breakdown on the preparation and installation of basement insulation.

Report outlining results from a 2005 hygrothermal pilot study in the South.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Information sheet providing links and resources for insulating basements in cold climates.

Report on whole-house and spot ventilation strategies for improved indoor air quality.

Web resource that lays out the pre-work considerations, methods and finishes for installing mechanical insulation.

Document describing guidance and requirements for flood openings in walls at and below grade.

Guide describing flood protection measures for utility systems, including mechanical, electrical, plumbing, and fuel.

Information sheet including a checklist of steps to follow for pouring concrete.

Website providing information about how to keep the properties rat-free and address conditions that can lead to rats.

Article describing how replacing permanent split capacitor (PSC) motors with electronically commutated motors (ECM) can boost bottom line for HVAC contractors as well as improve customer comfort and satisfaction.

Report describing how to construct a frost protected shallow foundation (FPSF) as a practical alternative to a deeper, more-costly foundation in cold regions with seasonal ground freezing and the potential for frost heave.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2016, and is available for...

Website providing information on all types of pest management for multi-family housing.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Report presenting information that aids qualified architects and engineers in the identification of the best available refuge areas in existing buildings for sheltering in place during a tornado.

Information sheet with methods for constructing or retrofitting basements to reduce moisture issues.

Documents describing Flood Resistant Provisions of codes published by the International Association of Plumbing and Mechanical Officers (IAPMO): the Uniform Mechanical Code; Uniform Plumbing Code; Uniform Swimming Pool, Spa and Hot Tub Code; and Uniform Solar, Hydronics and Geothermal Code (Uniform...

Conference paper presented at the 8th International Conference on Thermal Performance of Exterior Envelopes of Whole Buildings describing moisture from basements and crawlspaces as a source of indoor humidity and providing recommendations for finishing below-grade spaces to limit potential indoor...