Library

Webpage providing the latest versions of the International Wildland-Urban Interface Code (IWUIC), code establishing regulations to safeguard life and property from the intrusion of wildland fire and to prevent structure fires from spreading to wildland fuels; regulates defensible space and provides...

Website providing a probabilistic map of the expected number of damaging earthquakes around the U.S.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Information sheet providing links and resources for insulating basements in cold climates.

Federal Trade Commission (FTC) Regulation 16 CFR Part 460: Federal regulation on labeling of home insulation products.

Website describing the wildland-urban interface code and providing links to resources.

2017 version of a standard covering requirements for single- and dual-pane windows, glazed side-hinged door systems, sliding doors, tubular daylighting devices, and unit skylights developed jointly by the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association...

Website describing the EPA Lead Renovation, Repair, and Painting Rule that establishes requirements to reduce lead exposure for firms and individuals performing renovations that might disturb painted surfaces in buildings and homes built pre 1978 that might be occupied by children.

Guide describing sound mitigation measures to lower building natural disaster vulnerability to assist local officials and community decision makers in coastal areas.

Document describing good practices for insulating basements in new and existing homes.

Document providing information on basement insulation, air sealing and water management retrofits.

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire loads, and their combinations for general structural design. This version of the standard was published in the year 2016 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, seismic, and wind loads, and their combinations for general structural design. The current version of this standard was published in the year 2022 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, snow, rain, atmospheric ice, earthquake, and wind loads, and their combinations for general structural design. This version of the standard was published in the year 2010 and is available in both digital and print...

Webpage for the CEC’s Modern Appliance Efficiency Database System

List of appliance brands and models, showing their performance and efficiency as tested by the appropriate standard.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

RESNET standards aimed to ensure that accurate and consistent home energy ratings are performed by accredited home energy rating providers through their raters nationwide.

NABCEP main webpage.

Link to the flood plain management criteria section in the latest version of the National Flood Insurance Program (NFIP)

Resources describing the National Flood Insurance Program's technical bulletins for flood zone construction, including foundation walls, corrosion protection, floodproofing, and breakaway walls among other topics.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Report describing the interactions, both positive and negative, between common green building practices and the robustness of residential buildings to withstand natural hazards.

An interactive website providing facts on new, single-family homes constructed in 2019.

A list of EPA federal regulations regarding stationary sources of air pollution.

Document describing guidance and requirements for flood openings in walls at and below grade.

Link to the NFPA standards collection; NFPA 211 provides guidelines for construction projects involving chimneys, fireplaces, venting systems, and solid fuel-burning appliances.

Standard for installing manufactured homes, including specifications and procedures, for installation of utility connections of a manufactured home.

Code providing minimum safety requirements for the design and installation of fuel gas piping systems in homes and other buildings.

This standard provides a benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards and has been adopted in all 50 states.

Standard providing a procedure for determining fenestration attachment product U-factors.

Standard for determining fenestration attachment product SHGC and visible transmittance.

Document providing supplemental information for code enforcement professionals about headers in nonbearing walls.

A document providing guidance on integrating a PV array with a roof system.

Website to access Oregon state specialty code. Chapter 11 contains requirements concerning energy efficiency measures in residential buildings.

Standards for paints and coatings.

Standards for requirements, performance, construction, workmanship and others for structural-use panels.

This CASE report proposes updates and revisions to the standards for residential swimming pool filtration pumps, new and replacement single phase pump motors under 5 horsepower (HP), controllers, portable electric spas as well as expanding the scope of the current standards to include light emitting...

Report documenting actual energy savings of a retrofit project in Boulder, CO.

Fact sheet poster describing an online tool offered within the Building America Solution Center which provides construction guidance for builders and contractors in building and renovating homes to be more resistant to natural disasters such as hurricanes, flooding, earthquakes and wildfires, etc.

Information sheet including a checklist of steps to follow for pouring concrete.

Standard providing information on contractors who offer radon control services to homeowners.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Website providing information about how to keep the properties rat-free and address conditions that can lead to rats.

Article describing key takeaways from two symposia held during Building Innovation 2016: The National Institute of Building Sciences Fourth Annual Conference and Expo, including that resilience can be affordable and cost-effective.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.