Library

Fact sheet describing a report providing best practices for reducing damages from floods to manufactured homes.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

Guide providing engineering seismic design and building practices based on post-earthquake research.

Standards book discussing the minimum standards of total system balance of HVAC systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Article from California Earthquake Authority on the benefits of retrofitting homes to withstand earthquake forces, with a focus on foundations, walls, and chimneys.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2017 and is available to order at the referenced link.

Code establishing the rules of safety relating only to pressure integrity for the design, fabrication, and inspection of boilers and pressure vessels during construction which was published in the year 2021 and is available to order at the referenced link.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Training manual on how to locate ducts within conditioned space and compact design.

Report about the fundamental concepts that must be understood at the planning or initial nspection of existing homes regarding surface and ground water management.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Report describing strategies to improve the aging steam heating systems in New York City to improve energy efficiency, reduce oil and gas usage, and cut maintenance costs.

Report aimed to quantify the impact of closed crawlspaces in new homes, and investigate modeling software to ensure accuracy of energy consumption predictions in these homes.

Guide about designing and installing closed crawlspaces in the Southeast.

Volume 1 of a two-volume report providing a comprehensive approach to planning, siting, and risk management for homes constructed in coastal environments.

Website discussing building foundation problems caused by settling soil in Colorado.

Information guide describing issues with concrete floors, in multiple climate zones.

Document discussing moisture considerations and testing techniques for concrete floors.

Report covering insulating crawlspaces.

Article describing the process of constructing concrete walls

Report providing guidance on designing buildings to be flood resistant.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.

Study characterizing how foundation heat exchangers (FHXs) used in residential ground source heat pump systems represent a potential cost savings due to their lesser first cost over other types of heat exchangers.

Documents describing the similarities and differences between the National Flood Insurance Program (NFIP) minimum requirements and the requirements of the International Codes® (I-Codes®) and ASCE 24, Flood Resistant Design and Construction, a standard referenced by the I-Codes., and illustrating...

Fact sheet discussing designs for prefabricated safe rooms built to ICC 500 standards mentioned in FEMA P-361.

Report describing dry floodproofing technologies for non-residential buildings, including information about regulatory requirements, design considerations, and descriptions of floodproofing methods and equipment.

Article describing the effective R-values of various subslab insulation products, including foil bubble pack.

Checklist highlighting the requirement for metal structural connections and materials fasteners used to retrofit or construct FORTIFIED buildings less than 3,000 ft from saltwater to be suitably protected from corrosion.

Checklist intending to clarify FORTIFIED Home™ eligibility requirements that relate to a home’s foundation.

Handbook providing guidance on the design and construction of foundations for homes, including insulation, air sealing, and water management details for basements, crawlspaces, and slabs.

Article describing a numerical model that can be used to size foundation heat exchanger (FHX) systems.

Article describing what the building codes say about frost-protected shallow foundations as a cost-saving alternative to conventional concrete foundations.

Guides describing frost-protected shallow foundations as an alternative method for building an energy-efficient foundation for a house in a cold climate that uses less concrete and saves on labor.

Article describing frost-protected shallow foundations with construction drawing details.

Report containing 37 fact sheets that provide technical guidance and recommendations concerning the construction of coastal residential buildings.

Report presenting seismic design and construction guidance for one- and two-family houses for homebuilders, knowledgeable homeowners, and other non-engineers.

Brochure describing FEMA documents and foundation tips for floodproofing homes.

Checklist for verifying FORTIFIED levels and documentation needed.

Report describing ways to retrofit a home to make it more resistant to earthquakes.

Correcting pressure imbalances in your HVAC system can result in a healthier, more efficient home.

Central return designs require an open pathway between the room and the heart of the house where the return grill is located.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Article describing methods for designing and constructing multifamily buildings with insulating concrete forms (ICFs).