Library

Site showing flame spread ratings and definitions for common building materials.

Article from Building Science Corporation explaining 'wash and wear buildings' that are designed to be flooded and washed out afterwards.

PDF detailing the inspection and verification guidance for WaterSense labeled new homes including indoor and outdoor efficiency requirements, and homeowner and building management education.

Report providing general guidelines for the installation of rolled erosion control products.

Article explaining installing cavity insulation.

Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.

Article discussing the downside to recessed can lights.

EPA’s 2008 Lead-Based Paint Renovation, Repair and Painting (RRP) Rule (as amended in 2010 and 2011), aims to protect the public from lead-based paint hazards associated with renovation, repair and painting activities.

PDF literature review of the impact and need for attic ventilation in Florida homes.

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Guideline describing the importance of the different types of multifamily building attics and their unique challenges, and outlines strategies and materials used in air-sealing them.

Project discussing buried or encapsulated ducts and their pros and cons.

Guideline describing information and specifications relevant to air-seal existing attics.

Report covering the selection of roof vents for rainwater resistance.

FEMA mitigation assessment team report following Hurricane Charley in Florida including observations, recommendations, and technical guidance for retrofitting hurricane-damaged homes.

FEMA report describing findings from an investigation of Hurricane Ike in Texas and Louisiana and residential construction recommendations based on those findings.

FEMA mitigation assessment team report following Hurricane Ivan in Florida and Alabama including observations, recommendations, and technical guidance.

FEMA Mitigation Assessment Team Report describing damages from Hurricane Michael in Florida in Oct. 2018 and recommendations for future hurricane preparedness.

EPA guidance document providing information on moisture control in buildings.

Report on the use of vapor diffusion ports to reduce moisture issues with buried ductwork in unvented attics in hot-humid climates.

Brochure discussing specific practices for mitigating moisture and mold during the construction process.

Online course describing mold and mold remediation for environmental and public health professionals.

Document describing common questions about moisture, mold, and wood.

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

Article describing mulch requirements and benefits.

Pamphlet describing different types of mulches and their benefits.

Information sheet with nail withdrawl capacities in OSB.

Guide providing information on controlling attic ductwork sweating.

Fact sheet providing guidance on alternative building materials and techniques in coastal environments, including Engineered Wood Products, SIPs, ICFs, Prefabricated Shear Walls and Moment Frames, Sprayed Closed-Cell Foam Insulation, Advanced Wall Framing, and Modular Houses; also published in FEMA...

Report highlighting the evaluation methods used and extent of wind washing found in a study analyzing wind washing in thirty-two two-story homes.

A fact sheet educating the public on how to appropriately ground portable generators and the hazards associated with their use.

Standards for paints and coatings.

A study on how fires spread through exterior building envelopes with discussion on how fires propagate in a rain screen cavity.

Standards for requirements, performance, construction, workmanship and others for structural-use panels.

Report providing information on performance of mortars and concrete containing PCMs.

Article outlining moisture accumulation in open cell spray polyurethane foam.

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

City of Plymouth webpage providing information on the Plymouth Community Center Project.

Article describing how ice dams form on residential roofs, how they damage homes, and solutions to prevent future dams.

Database of approved products that meet the requirements of the High Velocity Hurricane Zone.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Website from the EPA containing information for homeowners and renters about how to identify asbestos in the home and how to deal with it to reduce exposure to it.

Website providing an online calculator for determining energy and cost savings from installing radiant barriers in attics.

Fact sheet describing analysis of potential heating and cooling savings from radiant barriers in attics.

U.S. Department of Energy's website describing radiant barriers in homes.

Website with answers to some of the most commonly asked questions about attic radiant barriers.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

Article describing moisture and ice dam issues in attics and how to air seal the attic floor.