Library

Manual describing methods for rodent-proofing buildings.

Article describing how insulating and air sealing unfinished attic spaces can lead to reduced energy bills in some homes.

Report on hybrid ventilation methods for insulated and sealed crawl spaces.

Factsheet describing air-sealing.

Article describing various types of caulks and sealants, their formulas and best uses.

Report describing construction of test homes in Atlanta, GA meeting Building America savings targets and serving as a basis of design for other homes Martin Dodson plans to build within the Serenbe community.

Report describing development of a package of energy efficiency measures to achieve 60% energy savings in a test house.

Report evaluating the renovation of a 5,800-ft2, multiuse facility located in St. Petersburg, on the west coast of central Florida, in the hot-humid climate.

Website with consumer information about duct cleaning.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Literature review from NFPA on the use of insulation to protect the piping in home fire sprinkler systems from freezing conditions.

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Standard specification covering elastomeric cellular preformed gasket and sealing materials. This version of the standard was published in the year 2011 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2021, 2015, 2006, and...

Standard specification covering elastomeric cellular preformed gasket and sealing materials. This version of the standard was published in the year 2021 and is available for preview and purchase at the reference link. Other versions of the standard were published in the years 2015, 2011, 2006, and...

Standard specification covering the properties of a cured single- or multicomponent cold-applied elastomeric joint sealant for sealing, caulking, or glazing operations on buildings, plazas, and decks for vehicular or pedestrian use, and types of construction other than highway and airfield pavements...

Report addressing barriers to information, contractor resources and cost savings associated with steam balancing multifamily buildings.

Information sheet about buried ducts.

Website providing information on all types of pest management for multi-family housing.

Report about the impact on the loads when common safety factors are applied to the load calculation process using two houses that meet the 2009 IECC prescriptive path modeled as the accurate baseline.

Report following the evolution of the construction quality process from its development for new homes to its application construction of a HPH with enhanced specifications, and its application in a crawlspace renovation.

Document covering the pros and cons of compact air distribution systems and the decision criteria that must be considered early in the whole-house design process.

Document serving as a starting point that features initial tools and resources for teams to start collaborating to continually improve the energy efficiency and durability of new houses.

Report about proper water heater selection developed to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Report describing findings from research related to heating, ventilation, and air conditioning (HVAC) companies that have made the decision to transition to whole house performance contracting (WHPC).

Research study determining how well high performance envelope and innovative cooling system interact to cost effectively reduce cooling energy use in this hot-dry climate.

Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.

Report providing a strengths, weaknesses, opportunities, and threats (SWOT) analysis inherent to different models as a way of thinking about the transition from traditional business models into a viable model for delivering deep energy retrofits.

Report about seeking a 30% source energy savings targets over a comparable 2009 International Energy Conservation Code-built home in the cold climate zone, using simple measures.

Report developed for Habitat for Humanity about lessons learned from demonstration retrofit projects undertaken by Habitat for Humanity affiliates in New York, Maryland, and Pennsylvania; with building systems consulting and technical assistance provided by Steven Winter Associates.

Article on thermal protectors in recessed light fixtures.

Article describing tips for effectively installing weatherstripping on windows and doors.

Case study about a structural sheathing product composed of enhanced EPS rigid foam with OSB adhered on one side.

Information sheet describing transfer ducts and grilles for HVAC.

Information sheet providing definitions, applications, and techniques for applying air barriers.

Information sheet with methods for constructing or retrofitting basements to reduce moisture issues.

Research study comparing TRNSYS Type 604 pipe model against laboratory pipe heat loss test data and detailed field monitoring data.

Research report that validates Pinhole Insulation®, offering a cost-effective, minimally invasive solution for enhancing insulation and air sealing in enclosed roof cavities, improving R-value by 60% compared to traditional methods.

Report about a project with successful integration of numerous energy-conservation and renewable-energy features into a beautiful, comfortable, and very energy-efficient off-grid home.

Information sheet about proper ventilation and air sealing.

Guide providing information on controlling attic ductwork sweating.

Article describing the process of adding weatherstripping to and weatherizing old doors.

Webpage describing weatherstrip tips and tricks to properly air seal doors.

Fact sheet describing how weatherstripping can be an easy and cost-effective way to save money on energy costs and improve comfort by reducing drafts.

Article describing an overview of weatherstripping requirements.

Document describing different spray foam materials including some pros and cons and technical specifications.

Introductory guide to air sealing the envelope of a home to reduce wasted energy and save on energy costs.

Report outlining the features of a test house built in Silver Spring , Maryland, and discussing the implementation of the energy efficient design, and reports on the short-term testing results.

Report describing the design and construction of a highly energy efficient community of ten duplexes in Greenfield, Massachusetts.

Report and case study describing a retrofit project for single family homes in the Pacific Northwest.