Library

Report explaining moisture-related concerns for high R-value wall assemblies and discusses past Building America research work that informs this study.

Report describing evaluation of several configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies.

RESNET standards aimed to ensure that accurate and consistent home energy ratings are performed by accredited home energy rating providers through their raters nationwide.

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

Report providing guidance to air-sealing multifamily homes.

NABCEP main webpage.

Link to the flood plain management criteria section in the latest version of the National Flood Insurance Program (NFIP)

Resources describing the National Flood Insurance Program's technical bulletins for flood zone construction, including foundation walls, corrosion protection, floodproofing, and breakaway walls among other topics.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Report describing the interactions, both positive and negative, between common green building practices and the robustness of residential buildings to withstand natural hazards.

An interactive website providing facts on new, single-family homes constructed in 2019.

A list of EPA federal regulations regarding stationary sources of air pollution.

Report demonstrating cost-effective energy savings targets as well as improved comfort and indoor environmental quality associated with deep energy retrofits by a large public housing authority as part of a larger rehabilitation effort.

Link to the NFPA standards collection; NFPA 211 provides guidelines for construction projects involving chimneys, fireplaces, venting systems, and solid fuel-burning appliances.

Standard for installing manufactured homes, including specifications and procedures, for installation of utility connections of a manufactured home.

Code providing minimum safety requirements for the design and installation of fuel gas piping systems in homes and other buildings.

This standard provides a benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards and has been adopted in all 50 states.

Standard providing a procedure for determining fenestration attachment product U-factors.

Standard for determining fenestration attachment product SHGC and visible transmittance.

Document providing supplemental information for code enforcement professionals about headers in nonbearing walls.

Fact sheet describing a novel, simplified air delivery system using a plug-and-play model that features 3-inch diameter flexible ducts, efficient fittings, and a simplified installation process that resulted in successful market engagement through commercialization.

A document providing guidance on integrating a PV array with a roof system.

Report studying the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%.

Report presenting the results of a study evaluating retrofit solutions for addressing the effects of wind washing on homes.

Website to access Oregon state specialty code. Chapter 11 contains requirements concerning energy efficiency measures in residential buildings.

Standards for paints and coatings.

Report providing information about improving the energy efficiency and long-term durability of the buildings that are being reconstructed post Katrina in New Orleans.

Report providing information about improving the energy efficiency and long-term durability of the buildings that are being reconstructed post Katrina in New Orleans.

Standards for requirements, performance, construction, workmanship and others for structural-use panels.

This CASE report proposes updates and revisions to the standards for residential swimming pool filtration pumps, new and replacement single phase pump motors under 5 horsepower (HP), controllers, portable electric spas as well as expanding the scope of the current standards to include light emitting...

Report documenting actual energy savings of a retrofit project in Boulder, CO.

Research study exploring a test method measuring air leakage between units through common surfaces and air infiltration across exterior, noncommon surfaces of the enclosure.

Fact sheet poster describing an online tool offered within the Building America Solution Center which provides construction guidance for builders and contractors in building and renovating homes to be more resistant to natural disasters such as hurricanes, flooding, earthquakes and wildfires, etc.

Article describing airflow within buildings due to pressure differences.

Report about seven pilot homes and development of guidelines for deep energy retrofits in cold climates.

Information sheet about how to reduce thermal bridging in walls.

Standard providing information on contractors who offer radon control services to homeowners.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Research study about two test homes that are examined with the goal of providing case studies that could be applied to other similar New England homes.

Report describing steps homeowners can take to improve the indoor air quality in their home, including ventilating, preventing pests, and reducing pollutants in the home.

Document reviewing ventilation strategies for different climate zones that also includes schematic drawings and photographs of various ventilation installations.

Article describing key takeaways from two symposia held during Building Innovation 2016: The National Institute of Building Sciences Fourth Annual Conference and Expo, including that resilience can be affordable and cost-effective.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

Fact sheet describing an alternative to piles in V Zones and A Zones in coastal areas where soil properties preclude pile installation, but the need for an “open foundation system” still exists and recommendations for good masonry practices in coastal environments; also published in FEMA P-499 “Home...

Website describing the RELi rating system and leadership standard that takes a holistic approach to resilient design.

Table in the IRC describing bracing requirements for specified wind speeds and building story locations.

Webpage containing downloadable fact sheets covering carpet-related topics including Indoor Air Quality, Asthma and Allergy, Cleaning Products, and Environmental Sustainability.