Library

Report describing a simple and general way to generate House Simulation Protocol (HSP)-consistent internal sensible and latent loads in unoccupied homes.

Updated wildfire risk assessment, community impacts, and building science measures following the disastrous 2020 wildfire season in the western U.S.

Wildfire construction guidelines from the Colorado State Forest Service focusing on site design and building materials to mitigate damage to homes in wildfire-prone areas.

Website containing resources from the nonprofit FLASH, which "is the country’s leading consumer advocate for strengthening homes and safeguarding families from natural and manmade disasters."

Guide from Building Science Corporation on how to construct a flood and hurricane resistant home.

Report outlining the energy upgrade package implemented in Ft. Benning, GA, Indianhead Townhomes project and the findings of the Southface Energy Institute's post-renovation analysis.

Animated video demonstrating the continuous load path of a hurricane on a house.

Website describing the Insurance Institute for Business & Home Safety (IBHS)'s Fortified Home program which offers home builders standards and guidance for constructing and renovating homes for increased disaster resistance.

Checklist providing specific information about the type of residential building eligible for designation consideration in the FORTIFIED Home program.

Conference paper describing how retrofits were used in a Florida home to change it from a high energy user to a near zero-energy home.

Report describing the cost-effectiveness and performance of all-electric, zero net energy multifamily buildings in California, detailing technical challenges and providing recommendations for design, construction, codes, standards, and operations to support future projects.

Report covering the fire performance of combustible cladding over combustible insulation.

Report detailing field walk-through evaluations, energy simulations for projected savings with exterior insulation upgrades, building envelope energy improvement cost estimates, and installation and maintenance of monitoring equipment and data.

Research report presenting results of short term tests on measures used in an energy efficiency retrofit project in California.

Guidance from HUD for volunteer team leaders, project managers and supervisors who work in recovery and rebuilding after natural disasters.

A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.

Document providing guidance about building healthy homes using building science principles.

Webpage listing research projects studying deep energy retrofits of homes in Florida.

Document providing a roadmap to aid Habitat for Humanity affiliates in building high performing houses by using materials and techniques that are affordable, do not add any maintenance burden, and are volunteer friendly.

Report providing a collection of fact sheets describing guidance for constructing homes in wildfire zones.

Research study investigating the factors influencing consumer adoption of HEDs and evaluating the resulting electricity consumption.

A comprehensive list of all ENERGY STAR home performance programs.

Guidebook that provides information on earthquake hazards that can damage homes, the design and retrofit of earthquake resistant housing, and how to find more information on earthquake safety.

Report documenting short-term test results of the Shift House and compares the results of Passive House Planning Package and Building Energy Optimization modeling of the project.

Report detailing an evaluation of Orlando Utilities Commission (OUC) residential energy efficiency demand side management (DSM) programs to assess their impacts and relative measures of energy and economic performance.

Report presenting construction methods, building products, appliances and equipment of four single-family houses that achieve dramatic energy reductions and approach “net zero energy” use.

A report describing how to build a high-performance affordable house to achieve 30% whole house energy savings in the mixed-humid climate region.

Factsheet describing re-siding retrofits containing exterior insulation and window upgrades aimed at improved energy savings and comfort.

Factsheet describing the performance criteria and key components of DOE Zero Energy Ready homes.

Factsheet describing the importance of building enclosures and their impact on energy efficiency.

Wildfire guidance for homes located in the wildland urban interface, focused on site design and individual pieces of the home.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

Article from Building Science Corporation explaining 'wash and wear buildings' that are designed to be flooded and washed out afterwards.

Guide describing the use of a collaborative, multidisciplinary process that considers and optimizes the building as an entire system including its technical equipment and surroundings for efficient, sustainable, and cost-effective construction and operation over the building’s entire lifespan.

Report that describes BSC's Houses That Work II (HTWII) climate-specific technical resource, beginning with an overall HTWII introduction and four sections explaining the four most important hygro-thermal climate regions: Hot-Humid, Mixed-Humid, Cold, and Hot-Dry/Mixed-Dry.

Report covering reservoir claddings, back ventilation and vapor throttles.

Article providing guidance for installing manufactured stone veneer, including information on rainscreens.

Website explaining the LEED v4.1 program and providing a portal for those who want to investigate or start a LEED project.

Webpage published by the National Fire Protection Agency (NFPA) that lists more than 300 consensus codes and standards intended to minimize the possibility and effects of fire and other risks.

Report presenting a cold climate project that examines the relationships among energy efficient single-family residential thermal enclosures, room-to-room temperature variations, and simplified space conditioning systems.

Report about a two-year study intended to document the energy performance of a house in each sub-metered area and compare the performance to modeled predictions and to assess the thermal comfort performance of the single point mini-split heat pump.

Report using a field test plan to evaluate the success of implementing energy efficiency upgrades at the community scale incorporating whole-house systems integrated measures package (SIMP).

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Guidebook providing useful examples of high performance retrofit techniques for the building enclosure of wood frame residential construction in a cold and somewhat wet climate.

Report summarizing a case study about the performance of three occupied homes built in 2009 in San Antonio, Texas.

Report describing an analysis method for determining optimal residential energy efficiency retrofit packages and applies the analysis method to a 1960s-era home in eight U.S. cities.

Website describing Minnesota Power’s New Construction Energy Efficiency program that promotes building practices and technologies that enhance new residential construction.

FEMA mitigation assessment team report following Hurricane Ivan in Florida and Alabama including observations, recommendations, and technical guidance.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Report about a test home project evaluating strategies to elevate the performance of existing homes to a level commensurate with best-in-class implementation of high performance new construction homes.