Library

This report will review, and summarize the current state of understanding and research into enclosures with higher thermal resistance, so-called “High-R Enclosures.” Recommendations are provided for further research.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

Report about the fundamental concepts that must be understood at the planning or initial nspection of existing homes regarding surface and ground water management.

Volume 1 of a two-volume report providing a comprehensive approach to planning, siting, and risk management for homes constructed in coastal environments.

Volume II of a two-volume report providing a comprehensive approach to design, construction, and renovation of homes located in coastal environments.

Broschure detailing water control strategies for building openings (e.g., vents and drainpipes).

Research study that utilizes EnergyPlus equipped with the moisture capacitance model to analyze the indoor relative humidity in three home types.

Expert Meeting about interior insulation retrofit of mass masonry wall assemblies held on July 30, 2011.

Article describing methods to manage moisture, rainwater, and vapor in basements and crawlspaces.

Research study presenting results of an existing home monitoring project designed to measure wall cavity moisture characteristics.

Report covering control of hydrostatic pressure in wall assemblies.

Blog entry describing methods for insulating basement walls on the interior or exterior.

Report documenting the measured performance of six residential ENERGY STAR vapor compression dehumidifiers.

Report focusing on managing the driving forces that move air and water vapor across the building envelope.

Document describing good practices for insulating basements in new and existing homes.

Document providing information on basement insulation, air sealing and water management retrofits.

Report summarizing the importance of properly insulating and air sealing masonry walls, providing step by step instructions and approaches.

Report covering the fundamental waterproofing strategies for tub and shower assemblies.

Report describing the work conducted for high performance hybrid assemblies.

Report covering wind loading on roofing assemblies.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

Article describing ways to protect roofs from water infiltration by using self-adhering underlayment in vulnerable locations such as roof valleys, eave edges (to help deal with ice dams), rake edges, roofs to vertical walls (such as dormers), sidewall protection, the bottom of dormer valleys, and...

Presentation describing the challenges of insulating an existing basement, presented to the Building America residential energy-efficiency stakeholder meeting.

Report summarizing current research, summarizes issues that have been experienced with current best practices, and recommends ways in which the best practices can be improved for water managing sheathings.

Guide describing details that serve as a visual reference for each of the line items in the Water Management System Builder Checklist.

A builder checklist guide for the water management of properties with appropriately-designed building technologies.

Manual showing how to properly use grass swales to manage excess water runoff.