Library

Checklist providing recommendations for the right tape in order to reduce the risk of leaks during storms with wind-driven rain.

Checklist highlighting the requirement for metal structural connections and materials fasteners used to retrofit or construct FORTIFIED buildings less than 3,000 ft from saltwater to be suitably protected from corrosion.

Checklist intending to clarify FORTIFIED Home™ eligibility requirements that relate to a home’s foundation.

Checklist providing specific information about the type of residential building eligible for designation consideration in the FORTIFIED Home program.

Factsheet describing ways to install sheathing over existing 1x roof decking.

Checklist providing prescriptive instructions on how to retrofit ladder framing on gable end overhangs to achieve a maximum depth of 18 in. from the face of the wall.

Checklist describing requirements for roof sheathing along the gable end truss or rafter to achive a FORTIFIED Roof, including New Roof designations and exceptions.

Factsheet describing garage door pressure rating requirements in high wind– prone areas.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for Existing Homes.

Website providing resources for roofers to construct high-wind, hurricane, and hail-resistant roofs from IBHS Fortified program.

Checklist providing information on how and when to install solid sheathing over spaced deck boards on homes located in areas that use the FORTIFIED Home™–High Wind standards.

Checklist providing good and bad methods of fortifying the roof, especially in high wind situations.

Checklist providing good and bad methods of fortifying the roof, especially in hurricanes.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind and hail resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for hurricane resistance.

Checklist highlighting key concepts of wind design uplift pressures and design uplift pressure ratings for proper selection and installation of residential roof covering systems to comply with section R905.1 of the 2015 International Residential Code for a FORTIFIED Roof™–New Roof designation.

Fact sheet instructing installers about flashing installed on a FORTIFIED roof and points to roof covering manufacturers for flashing installation instructions.

Checklist providing the type of roofing felt recommended by IBHS as a quilified sealed roof deck system for asphalt shingle or metal roofing.

Checklist providing options and a guide for taping roof deck seams.

Checklist providing information on strengthening the attachment of roof sheathing and installation of a sealed roof deck system using a spray polyurethane foam adhesive.

Checklist providing selection and installation guidance for residential, non-structural metal roof systems installed over wood roof decks with a roof slope 2:12 or greater to comply with section R905.1 of the 2015 IRC for a FORTIFIED Roof – New Roof Designation.

Checklist providing additional guidance and options for asphalt shingle installations at roof edges, intersections and valleys.

Website providing technical documents of checklists, calculators, bulletin, modular home toolkit, standard details, and corrosion resistance requirements – map set; describing the requirements of the IBHS Fortified Home program to improve the disaster resistance of new and existing homes.

A builder's guide describing hurricane-resistant reinforcements for gable ends.

Standard that applies to storage water heaters, instantaneous water heaters, and circulating water heaters including booster water heaters; the current version of this standard was published in the year 2019 and it is available for purchase along with a digital preview on the ANSI webstore page.

Guide describing how and where to install flashings in order to weatherproof a roof.

Brochure on specifications for solar thermal systems.

Report describing the cost-effectiveness and performance of all-electric, zero net energy multifamily buildings in California, detailing technical challenges and providing recommendations for design, construction, codes, standards, and operations to support future projects.

Article describing the fundamentals and basics of glazing hazard mitigation practices for both new and existing buildings.

IRC guide referencing wood truss bracing best practices and requirements.

Report describing tsunamis and options for vertical evacuation from tsunamis; the guide addresses determination of tsunami and earthquake loads and structural design criteria and concepts, primarily for commercial buildings.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance to high wind and hail.

Informational guide describing the design, installation, and maintenance best practices and technical considerations for integrated Heat Pump Water Heaters in single-family and multifamily new construction.

Report describing the advantages and best practices for installing heat pump water heaters (HPWH), highlighting their improved energy efficiency, reliability, and critical considerations such as condensate management, proper sizing, and optimal installation location to enhance performance and...

The Heat Pump Water Heater Installation Tool helps contractors, installers, and homeowners through the decision-making process for heat pump water heater (HPWH) product selection and installation, with a focus on overcoming installation barriers.

Report describing the significant potential for energy use reductions through heat pump water heaters, which have been a crucial part of Northwest power plans for decades and have recently achieved substantial savings with new integrated models and climate specifications.

Report describing the features, benefits, and best practices for the design and installation of heat pump water heaters in new low-rise multifamily buildings, highlighting their efficiency, reliability, and contribution to decarbonization goals.

Report describing a laboratory assessment that provides insights into space requirements and venting strategies for heat pump water heaters (HPWH) to enhance retrofit installations and provide actionable guidance for manufacturers, designers, engineers, installers, and owners.

Guide providing detailed selection and installation instructions for heat pump water heaters.

Provides consumers with general information on solar water heating systems and how to select a contractor.

Case study of new home construction in the hot-dry and mixed-dry climate zones.

Best Practices document providing an introduction to current photovoltaic and solar thermal building practices.

Report presenting seismic design and construction guidance for one- and two-family houses for homebuilders, knowledgeable homeowners, and other non-engineers.

Report on a project that enhanced the HWSIM distribution system model to more accurately model pipe heat transfer.

Article describing the factors that can lead to inefficient hot water distribution systems in homes.

Guide describing how to choose energy-efficient water heaters, including heat pump models, with tips on installation, rebates, and incentives for maximizing energy savings.

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.

ENERGY STAR webpage describing how a heat pump water heater works.

Article describing how omission of two small but critical wall details, a kick-out flashing and a weep screed, lead to extensive water damage to a wall.