Library

Factsheet describing smart practices for minimizing damage to residential electrical service components during coastal and riverine flood events.

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire loads, and their combinations for general structural design. This version of the standard was published in the year 2016 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, seismic, and wind loads, and their combinations for general structural design. The current version of this standard was published in the year 2022 and is available in both digital...

Standard using performance-based principles to determine dead, live, soil, flood, snow, rain, atmospheric ice, earthquake, and wind loads, and their combinations for general structural design. This version of the standard was published in the year 2010 and is available in both digital and print...

FEMA report describing findings from an investigation of Hurricane Ike in Texas and Louisiana and residential construction recommendations based on those findings.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

The next generation of building enclosures is a key step toward achieving high-performance goals through decreasing energy load demand and enabling advanced space-conditioning systems. Yet the adoption of high-R enclosures and particularly high-R walls has been a slow-growing trend because...

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

Online geospatial map with interactive viewer showing flood risk areas and base flood elevations

Brochure outlining what is covered under the National Flood Insurance Program

Resources describing the National Flood Insurance Program's technical bulletins for flood zone construction, including foundation walls, corrosion protection, floodproofing, and breakaway walls among other topics.

Report updating and expanding on a 2005 study that found, among other things, that every $1 of natural hazard mitigation funded by FEMA between 1993 and 2003 saved the American people an average of $4 in avoided future losses.

Website containing USGS-related publications related to natural hazards.

Report describing the interactions, both positive and negative, between common green building practices and the robustness of residential buildings to withstand natural hazards.

Guide for electrical systems design including installation guidance and best practices for flood-prone areas.

Guide for fuel systems design including installation guidance and formulas for calculating loads and buoyancy forces for specifying number, type and capacity of strapping for hold-downs in flood-prone areas.

Document describing guidance and requirements for flood openings in walls at and below grade.

Report providing quick reference guide information to help a family prepare for hurricane season, including seven steps to a wind resistant home, a wind inspection checklist, and how to find a contractor.

Report providing guidance on protecting foundation walls and enclosures from flood damage.

Report highlighting the evaluation methods used and extent of wind washing found in a study analyzing wind washing in thirty-two two-story homes.

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

Webpage for home owners describing ways to prepare indoor and outdoor fuel tanks to avoid displacement during floods.

Database describing FEMA preparedness webinars including natural hazard preparedness.

Report covering reducing risk from flooding.

Brochure describing multiple flood safety measures for homeowners to take, including home renovation suggestions, yard maintenance, and additional resources.

Brochure describing multiple storm surge (coastal flooding) safety measures for homeowners to take, including home renovation suggestions, yard maintenance, and recovery advice.

Guide describing flood protection measures for utility systems, including mechanical, electrical, plumbing, and fuel.

Webpage describing how to elevate major appliances in case of a flood.

Flyer describing reasons and best practices for raising electrical systems above flood-levels.

Report providing strategies to support occupant behavior changes for enhancing resilience, and to reduce a building's vulnerability to extreme weather, climate change, and loss of power.

Report covering the reconstruction of flood damaged homes.

Report providing recommended designs and guidance for rebuilding homes destroyed by hurricanes in the Gulf Coast.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

Guide providing information for professional builders and contractors rehabbing flooded single-family houses with emphasis on safe practices and the most important activities in the rehab process.

Fact sheet describing NFIP requirements for repairs, remodeling, and additions, and discussing opportunities for retrofitting in coastal flood hazard areas with recommendations for exceeding the minimum NFIP requirements; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction...

Fact sheet describing requirements and opportunities for retrofitting, and making “best practice” recommendations for repairs, remodeling, and additions in coastal high wind areas; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Technical bulletin describing National Flood Insurance Program (NFIP) requirements for flood openings in foundation walls and walls of enclosures below elevated buildings.

A guide on how to anchor fuel tanks to avoid damage from flooding and seismic events to the home by using straps and solid concrete slabs.

Fact sheet describing methods for flashing and air-sealing windows and doors.

Factsheet from HUD describing how to properly rebuild following natural disasters in Puerto Rico.

Report covering the planning, design, construction, and operation of residential and community safe rooms. Written for architects, engineers, building officials, local officials and emergency managers, and prospective safe room owners and operators.

Fact sheet describing guidance concerning lot selection and building siting considerations for coastal residential buildings, including factors that constrain siting decisions, coastal setback lines, common siting problems, and suggestions for builders, designers, and owners; also published in FEMA...

High-density sidewall cavity insulation can be a major comfort and savings boost. It saves energy by slowing both conductive and convective losses, but only if the right things are done and done right. This always requires site-specific thinking.

Fact sheet describing basic design and installation tips for various types of siding for high-wind regions, including vinyl, wood, and fiber cement and discusses sustainable design issues; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Job Process sheet for the manufactured housing industry showing how to split and notch insulation batts to fit around electrical boxes and wiring in a factory production environment.

Standard describing a test method measuring air-leakage rates through a building envelope under controlled pressurization and de-pressurization which was published in the year 2019 and is available for preview and purchase at the reference link.

Standard that describes the principles for the design of a hot box apparatus and the minimum requirements for the determination of steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. The current version of the standard was published in 2019, and...

Standard describing two techniques for measuring air leakage rates through a building envelope in buildings that may be configured to a single zone which was published in the year 2022 and is available for preview and purchase at the reference link.

Information sheet describing correct application of stucco.