Library

Research study searching for combinations of existing technologies that could enable a minimally invasive, cost-competitive, easily deployable method of upgrading soil-side foundation insulation in existing buildings.

Case study describing novel technique for installing exterior spray foam on foundation walls that uses high-pressure water sprayer and a “hydro vac” to remove dirt along the foundation wall.

Expert Meeting about interior insulation retrofit of mass masonry wall assemblies held on July 30, 2011.

Webpage from LSU AgCenter answering frequently asked questions after gutting a flooded home, including mitigation strategies for future floods.

Handbook describing the permitting process regulating the transfer of stormwater from private property owners to the State of Florida Department of Transportation stormwater drainage systems.

An engineering design guide for hydronic heat loops, discussing the features and advantages of condensing boilers.

Fact sheet describing how to prepare for hurricane season and mitigate damage from floods and high winds.

A recovery advisory guide presenting important recommendations to reduce wind and water infiltration damage to new and existing residential buildings.

Document explores alternatives to riprap on banks and waterways to mitigate bankside erosion in the Pacific Northwest.

Factsheet describing backflow valve benefits and tips.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Journal article reporting on field experience of unvented cathedralized (UC) attics in several environments in the United States.

Report describing research about a test implementation of an unvented tile roof assembly in a hot-humid climate.

Report to understand the long-term moisture performance of unvented roof assemblies with fibrous insulation.

Articles, research, case studies, and more outlining considerations for planning and installation of a fire-protection system.

A webpage discussing how water heater expansion tanks operate and how to repair them.

Article describing methods to manage moisture, rainwater, and vapor in basements and crawlspaces.

Research report assessing the moisture and cooling load impacts of airtightness and mechanical ventilation in homes in hot-humid climates.

Study reporting the results of comparative testing of the effect of various roof types on cooling energy performance in a test facility.

Brochure-guide describing swales and their qualities, including objective, maintenance, and design considerations.

Manual for proper installation practices, industry standards and the code requirements of roofing tiles for the Florida market.

Website with information for consumers about solar thermal systems for homes.

Calculator determining the appropriate design pressures for steep-slope roof coverings for roofers and evlauators.

Fact sheet describing the acceptable underlayment alternatives including ASTM D6757 Underlayment Felt Containing Inorganic Fibers for Steep-Slope Roofing for certain applications.

Checklist providing recommendations for the right tape in order to reduce the risk of leaks during storms with wind-driven rain.

Checklist highlighting the requirement for metal structural connections and materials fasteners used to retrofit or construct FORTIFIED buildings less than 3,000 ft from saltwater to be suitably protected from corrosion.

Checklist intending to clarify FORTIFIED Home™ eligibility requirements that relate to a home’s foundation.

Factsheet describing ways to install sheathing over existing 1x roof decking.

Checklist providing prescriptive instructions on how to retrofit ladder framing on gable end overhangs to achieve a maximum depth of 18 in. from the face of the wall.

Checklist describing requirements for roof sheathing along the gable end truss or rafter to achive a FORTIFIED Roof, including New Roof designations and exceptions.

Report summarizing the requirements for strenghtening and protecting the roof, openings in the house, and creating a continuous load path to strengthen walls and foundation per the IBHS Fortified Homes Hurricane Standard for Existing Homes.

Checklist providing information on how and when to install solid sheathing over spaced deck boards on homes located in areas that use the FORTIFIED Home™–High Wind standards.

Checklist providing good and bad methods of fortifying the roof, especially in high wind situations.

Checklist providing good and bad methods of fortifying the roof, especially in hurricanes.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for high wind and hail resistance.

Checklist providing information about the specific requirements of FORTIFIED Roof™ design and construction standard for re-roofing specific for hurricane resistance.

Checklist highlighting key concepts of wind design uplift pressures and design uplift pressure ratings for proper selection and installation of residential roof covering systems to comply with section R905.1 of the 2015 International Residential Code for a FORTIFIED Roof™–New Roof designation.

Fact sheet instructing installers about flashing installed on a FORTIFIED roof and points to roof covering manufacturers for flashing installation instructions.

Checklist providing the type of roofing felt recommended by IBHS as a quilified sealed roof deck system for asphalt shingle or metal roofing.

Checklist providing options and a guide for taping roof deck seams.

Checklist providing information on strengthening the attachment of roof sheathing and installation of a sealed roof deck system using a spray polyurethane foam adhesive.

Checklist providing selection and installation guidance for residential, non-structural metal roof systems installed over wood roof decks with a roof slope 2:12 or greater to comply with section R905.1 of the 2015 IRC for a FORTIFIED Roof – New Roof Designation.

Checklist providing additional guidance and options for asphalt shingle installations at roof edges, intersections and valleys.

Website providing technical documents of checklists, calculators, bulletin, modular home toolkit, standard details, and corrosion resistance requirements – map set; describing the requirements of the IBHS Fortified Home program to improve the disaster resistance of new and existing homes.

Website offering an online training that teaches disaster-resistant best practices for roofers.

Handbook providing guidance on the design and construction of foundations for homes, including insulation, air sealing, and water management details for basements, crawlspaces, and slabs.

Web article discussing the primary approaches to waterproofing concrete foundations.

The FPC Monitoring project has evaluated radiant barrier systems (RBS) as a new potential DSM program.

Website describing wet floodproofing measures to prevent against structural damage, internal damage and damage to electrical components.