Library

Report describing the use of fresh air ventilation systems to eliminate the formation of icicles and ice dams along the eaves of roofs.

Guide describing the requirements by FORTIFIED Home™ for improving the home's resistance to high wind and hail.

Webpage providing maps and information to assess the particular hazards and risks for an area.

LBNL webpage introducing heat island effect and cool materials concepts, and providing links to LBNL pages explaining cool pavements, cool roofs, and cool walls.

LBNL webpage providing resources and tools related to cool technologies, including the SRI calculator and the DOE Cool Roof Calculator.

Webpage describing federal regulation related to excess flow valves on residential natural gas lines.

Best Practices document providing an introduction to current photovoltaic and solar thermal building practices.

Report containing 37 fact sheets that provide technical guidance and recommendations concerning the construction of coastal residential buildings.

Report providing a collection of fact sheets describing guidance for constructing homes in wildfire zones.

Article describing the causes that form ice dams, as well as solutions for preventing future ice dams on roofs, focusing on air sealing to prevent hot air leakage.

Website containing educational and marketing resources for residential fire sprinklers.

Report assessing the costs of home fire sprinkler systems.

A guide that summarizes building materials and design considerations for increasing wildfire-resistivity of homes in areas that are prone to wildfires.

Wildfire mitigation guidelines from the University of California outlining how to mitigate fire risk for attached decks.

Article from RMI on how climate change is leading to an increase in critical extreme heat hours and what smart building strategies can be taken to mitigate some of these effects including paint color and insulation.

Information sheet presenting the correct methods for building an insulated cathedral ceiling.

Article from Washington Post on passive cooling measures for homes during extreme heat.

Factsheet describing defensible space and wildfire risk reduction steps that homeowners can take to make their homes safer during a wildfire.

Article from Montana State University Extension explaining how proper insulation techniques can greatly reduce the risks of ice dams on roofs in cold climate zones.

Webpage describing how to locate and manually shut off natural gas service at the meter.

Checklist for verifying FORTIFIED levels and documentation needed.

A structural insulated panel (SIP) roof has no embedded lumber in the structure, and therefore nothing substantial for attaching PV array and solar hot water mounts. Single or double lumber splines could be put into the panels, or I-joists at 4-foot intervals could be added.

Code describing the requirements for existing site-built single-family homes to receive roof-to-wall retrofits when re-roofing.

A document aimed at reducing the vulnerability of a gable end roof to wind damage in a hurricane.

Report describing the hurricane retrofit guide with focus on walls and wooded framed walls.

Wildfire guidance for homes located in the wildland urban interface, focused on site design and individual pieces of the home.

Ignition resistant residential construction and landscaping guidelines from FireSafe Montana.

Article describing the effect metal roofs have on thermal performance in hot-humid climates.

Article describing excess flow valves installed on gas lines to shut-off natural gas flow to a home in the event that a gas line is severed due to an earthquake, natural disaster, earthquake, etc.

Article from Samuel L. Manzello and Sayaka Suzuki on tests undertaken to find the ideal amount of board spacing to resist deck ignition during fires.

Webpage detailing how to purchase and install the correct shut-off valve for homes in California, including differences between earthquake and excess flow valves and how to install each.

Site showing flame spread ratings and definitions for common building materials.

Article describing the second step of a three-step process for the installation a tubular skylight, using peel-and-stick flashing tape instead of roof cement, and integrating the roof underlayment with the flashing.

Article describing how to counterflash a chimney by tucking the upper pieces of counterflashing into the chimney mortar joints and overlapping them over the various pieces of base flashing, which are nailed to the roof deck.

Article describing the insurance savings of a home with a hip roof versus a gable roof from the perspective of an insurance advisor.

Article describing how the configuration of surrounding buildings affects the wind loads on a hip roof in a low-rise building.

Report discussing how to create livable space in the attic that meets IRC code requirements by either creating a ventilated roof assembly, or and unvented attic assembly.

Report describing ways to retrofit a home to make it more hurricane resistant.

Article showing steps for kick out flashing at roof-wall intersection.

Website describing the wildland-urban interface code and providing links to resources.

Article describing a technique for installing a skylight and avoiding potential water leaks with the use of a peel-and-stick (or self-adhesive) membrane under the flashing.

Test results used by multiple structural insulated panel manufacturers confirming a one-hour fire rating for specific SIP assemblies.

Guide for homeowners describing actions they can take to modify their home and the surrounding site to create a survivable space to reduce the amount of damage a home would likely experience during a wildfire.

Article describing lessons for builders and changes to local building code in Colorado Springs in response to regional wildfires.

A webpage outlining CAL FIRE’s recommendations for creating defensible space.

Web article describing many ways homeowners, contractors, and builders can make homes more resistant to hurricanes, tornadoes, high winds, floods, and hail.

Fact sheet describing important roof-to-wall and wall-to-foundation connection details for masonry construction in coastal areas, including load paths, building materials, and reinforcement; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.