Library

2015 edition of code for commercial buildings that brings together all structural, plumbing, mechanical, fuel gas, energy and electrical provisions for all buildings except detached one- and two-family residences and townhouses up to three stories.

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Document describing three methods for elevating a home out of the flood zone.

Standard outlining industry procedure for sizing residential duct systems.

Standard covering equipment sizing loads for single-family-detached homes, small multi-unit structures, condo­miniums, town houses and manufactured homes.

Standard covering sizing strategies for all types of cooling and heating equipment, as well as how to use comprehensive manufacturer’s performance data on sensible, latent, or heating capacity for various operating conditions.

Document providing guideance and considerations for duct design in an energy efficient house.

This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.

Document providing guidance to U.S. home builders who want to accept the challenge.

Guide describing measures that builders in the cold and very cold climates can take to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Guidance document providing BA research teams and partners with specific information and approaches to identifying and overcoming potential barriers to Building America (BA) innovations arising in and/or stemming from codes, standards, and rating methods.

Report summarizing research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost-neutral basis.

Document detailing how to build radon-resistant homes.

Report outlining the steps developers can take to create high-performance standards on a community-wide scale.

Technical report detailing a study in which actual cooling loads are compared to modeled cooling loads.

A fact sheet providing information on termite species and how to prevent them from entering into your home.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

Report identifying two barriers that limit the ability of builders to explore opportunities for higher levels of energy efficiency in housing: the use of duct system materials that inherently achieve airtightness and are right-sized for low-load houses, and, the ability to air seal fire separation...

Article describing a case study in which a whole-house battery and PV system was tested in a home with cooling and refrigeration during a hurricane in Florida.

This publication provides a set of best practices for improving indoor air quality in conjunction with energy upgrade work in homes.

Article describing a 9-step process to getting rid of rats and mice, and some preventative actions to take.

Guide by the Northeast Energy Efficiency Partnerships on how to size heat pumps in a cold climate.

Presentation about proper installation of flexible ducts.

Website blog with guidance about calculating heat-loss.

A website providing a checklist of important areas to check when sealing holes inside and outside of the home to prevent entry by rodents and other outside pests.

Factsheet describing tips for building or renovating with a focus on disaster resistance.

A factsheet providing information on how to prevent pests from entering the home by sealing cracks and openings.

Article describing what evaporative coolers are, how they work, different types, performance, where they are appropriate, and how to install and maintain them.

Article explaining how to use integrated pest management to choose methods of pest control that are safe and effective.

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Article describing mulching with lawn clippings.

Report discussing development of scopes of work and quality management for builders in mixed-humid climates.

Website providing information on tsunamis, earthquakes, tornadoes, hurricanes, thunderstorms and more.

NWCOA website homepage.

Report investigating what motivates remodelers to become energy-focused and what technical knowledge that need to be energy-focused.

Website of the New York Department of Environmental Conservation.

Report providing detailed steps for builders, architects, and property managers to take for integrated pest management for control of a variety of pests including insects, rodents, and birds.

Report presenting ways public housing authorities (PHAs) can develop packages of energy efficiency retrofit measures the PHAs can cost-effectively implement with their own staff in the normal course of housing operations at the time when units are refurbished between occupancies.

Report designed to help a builder understand quality management and its role in transitioning from conventional to HPH building and remodeling.

Website providing information about how to keep the properties rat-free and address conditions that can lead to rats.

Report describing steps homeowners can take to improve the indoor air quality in their home, including ventilating, preventing pests, and reducing pollutants in the home.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Manual describing methods for rodent-proofing buildings.

Website providing information about how to prevent rodent entry in homes.

Information sheet describing how to select a properly sized water heater based on household usage patterns, peak demand, and heater type—whether tankless, solar, or storage-based—to ensure efficiency and adequate hot water supply.

A website providing information on how to properly size a water heater based on tank size, volume, peak hour demand and other factors.