Library

2009 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

2012 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2015 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Code set from IAPMO explaining plumbing standards. 2015 publication.

2018 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Code set from IAPMO explaining plumbing standards. 2018 publication.

Acceptance criteria providing guidelines for demonstrating compliance with codes referenced in the criteria related to barriers to water migration in thin-set installations of ceramic tile and stone flooring and shower sub-pan linings.

Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Case study about high humidity, mold and condensation on surfaces in S. Florida, and how building characteristics cause and amplify these problems.

Research report describing study of interior and exterior air sealing techniques to stop ice dams in five 1.5-story retrofit homes conducted by the NorthernSTAR Building America Partnership team run by University of Minnesota.

Manual describing best practices or home construction in Alaska and northern climates.

Alliance for Water Efficiency website homepage.

Article by the Canadian Government on attic ventilation and considerations for moisture and ice dams.

Report covering interior energy retrofits of masonry buildings.

Article describing different kinds of water-resistant backer boards.

Fact sheet describing basement insulation considerations.

Information sheet describing techniques for insulating basements.

Article explaining the importance of regular inspections of boiler systems in maintaining their safety, lifespan, and efficiency.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Research study discussing how housewraps restrict or permit the passage of water molecules based on size, but cannot control the direction in which the water vapor molecules move.

Brochure providing information about flashing in all cimates.

Information sheet providing information about vapor management in building assemblies.

Information sheet providing details on the vapor permeance of different types of materials used in building assemblies.

Report providing water management details for roof assemblies.

The Builder's Guide provides the building industry with the latest and best practical information on how to apply building science principles to structures as systems in hot-humid climate regions.

Research study about key sustainability concepts, durability, energy efficiency and new flood resistant design.

Web based tool providing decision-making guidance for selecting wall assembly components.

This report will review, and summarize the current state of understanding and research into enclosures with higher thermal resistance, so-called “High-R Enclosures.” Recommendations are provided for further research.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

Report about the fundamental concepts that must be understood at the planning or initial nspection of existing homes regarding surface and ground water management.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Article describing the principle of capillarity in construction materials.

Article describing how closed crawlspaces can do "double duty" by controlling moisture and providing energy savings.

Volume 1 of a two-volume report providing a comprehensive approach to planning, siting, and risk management for homes constructed in coastal environments.

Volume II of a two-volume report providing a comprehensive approach to design, construction, and renovation of homes located in coastal environments.

Information guide describing issues with concrete floors, in multiple climate zones.

Document discussing moisture considerations and testing techniques for concrete floors.

Document about condensation between the panes, on the inside surface of the outer glass of double pane windows.

Guidance from Zero Energy Project on construction techniques for warmer climates, such as home orientation, and insulation requirements.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

This case study describes costs associated with the External Thermal and Moisture Management System developed by the NorthernSTAR Building America Partnership for retrofitting roofs with rigid foam over the roof deck, especially on one and a half-story homes.

Standard describing prediction, mitigation, and reduction of moisture damage to the building envelope, materials, components, systems, and furnishings, depending on climate, construction type, and HVAC system operation; the webstore allows preview or full purchase.

Article describing the causes of wood decay and moisture issues.

Report covering exterior energy retrofits of masonry buildings.

Conference paper describing the use of engineered rainscreen products to provide air flow and water drainage space in wall assemblies in residential and commercial buildings.

A guide on the use of rain barrels for greater water efficiency and use in gardens and lawns.

Article describing the difference between swales and hugels (berms used to create soil from woody debris).

Report covering the rainwater performance of building assemblies.