Library

Report providing builders in marine climates with guidance for building homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Document describing three methods for elevating a home out of the flood zone.

Study from Appalachian State University on passive solar design to take advantage of local climate zones for energy conservation.

Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Power Point PDF presentation on historical architecture in New Mexico

Article by the Canadian Government on attic ventilation and considerations for moisture and ice dams.

Report covering interior energy retrofits of masonry buildings.

This Best Practices Manual is the product of Hammer & Hand’s ongoing work to document and internally codify our standard operating procedures for construction practice.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Document providing guidance to U.S. home builders who want to accept the challenge.

Fact sheet providing background and technical information on Trombe wall design

Guide describing measures that builders in the cold and very cold climates can take to build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

Web based tool providing decision-making guidance for selecting wall assembly components.

Guidance document providing BA research teams and partners with specific information and approaches to identifying and overcoming potential barriers to Building America (BA) innovations arising in and/or stemming from codes, standards, and rating methods.

Report summarizing research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost-neutral basis.

Webpage explaining how to site and orient a house to take advantage of the solar path.

Document detailing how to build radon-resistant homes.

Article describing the principle of capillarity in construction materials.

Online tool for thermal comfort calculations and visualizations SoftwareX 12, 100563 https://doi.org/10.1016/j.softx.2020.100563

Climate Consultant is a software tool for helping architects, builders, contractor, homeowners, and students to understand their local climate.

Article describing how closed crawlspaces can do "double duty" by controlling moisture and providing energy savings.

Report outlining the steps developers can take to create high-performance standards on a community-wide scale.

Guidance from Zero Energy Project on construction techniques for warmer climates, such as home orientation, and insulation requirements.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Design and Construction Process chapter provides detailed guidance for each process phase: pre-planning, planning, construction, test-out and post-occupancy.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Lessons Learned chapter focuses on successful deep energy retrofit projects throughout the U.S.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Occupant Behavior chapter discusses how to assess homeowner behavior patterns and use these patterns to enhance overall energy savings.

Part of a larger LBNL report (Deep Energy Retrofit Guidance for the Building America Solutions Center), the Reducing costs and Increasing Cost-Effectiveness chapter provides suggestions for controlling deep retrofit costs, including both 'do's' and 'don'ts'.

Report covering exterior energy retrofits of masonry buildings.

Website for the U.S. DOE Solar Decathlon competition.

Study testing the effect of fan cooling on healthy adults at increased ambient temperatures.

Brochure providing information on the design of the EPA Region 8 headquarters in Denver, CO.

Report about an experimental evaluation conducted on a night sky cooling system designed to substantially reduce space cooling needs in homes in North American climates.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...

Technical report describing the impact of orientation on thermal comfort.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.

Article from Washington Post on passive cooling measures for homes during extreme heat.

Article from The Earthbound Report on passive cooling design strategies for homes located in hot climates.

Article describing how omission of two small but critical wall details, a kick-out flashing and a weep screed, lead to extensive water damage to a wall.

Website blog with guidance about calculating heat-loss.

Study evaluating opportunities for reducing cooling energy use in a hot dry climate through the use of shading and window options.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

Article describing walls and moisture development on them.

Book detailing passive cooling methods including airflow methods, evaporative cooling, and earth cooling.

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Siding installation guide for Ply Gem Siding Group products.