Library

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

City of Plymouth webpage providing information on the Plymouth Community Center Project.

Website providing guidance on how to reduce the risk of damage to a home from hail.

Database of approved products that meet the requirements of the High Velocity Hurricane Zone.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

Recovery Advisory document provide guidance related to the use and installation of opening protection systems to protect glazed openings (windows) from wind-borne debris during high-wind events.

Technical fact sheet describing the selection and installation of storm shutters and impact-resistant glazing and other types of opening protection in windborne debris regions; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Fact sheet describing conditions for wildfire, how a home catches fire, how to create a survivable space, the ideal fire resistant home.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

Report researching cost- effective solution packages for significant energy efficiency and indoor air quality improvements masonry multifamily urban buildings.

DOE report characterizing the installed base of windows and window coverings, and how users operate window coverings in order to enable precise quantification of energy savings.

Homepage for ENERGY STAR’s windows, skylights, and doors program providing information for consumers and links to product directories.

Report describing the testing of various siding materials for their ability to resist bullets from small firearms.

Fact sheet describing flashing of roof penetrations to make a home more resistant to high winds, hurricanes, and rainwater intrusion.

Research study about a high performance retrofit of an existing brick building (a former convent) into condominiums, all affordable housing.

Information sheet about window retrofit strategies for hot-dry climates.

Website providing an introduction to the concepts and principles of seismic design.

Article outlining the key issues related to the protection of the building envelope against seismic forces.

Report from FEMA describing techniques for floodproofing structures.

Step-by-step guide demonstrating replacement window selection process.

Description webpage providing information about home fire safety during sever weather for consumers.

Website providing the pros and cons of different siding materials for home building, including wood, vinyl, fiber cement, stucco, brick, metal, and stone.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Report informing building stakeholders about the risks a snow event poses to their buildings, preventative measures to take before the snow season, and actions that should be taken before, during, and after a snow event.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Standard covering the installation of fenestration products in new and existing construction, which was published in the year 2019, and is available for preview and purchase at the referenced link.

Standard covering the installation of fenestration products in new and existing construction which was published in the year 2007, and is available for preview and purchase at the referenced link.

Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2022, and is available for preview and purchase at the reference link. There are also other versions of...

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2023, and is available for preview and purchase at the reference link. There are also other versions of...

ASTM standard for wood-composite decking and guardrail materials under a variety of tests, including fire performance and UV resistance. Available for preview and purchase at the reference link.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

This standard specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at various temperature ranges. This version of the standard was published in the year 2019 and is...

Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa which was published in the year 2021 and is available for preview and purchase at the reference link.

ASTM standard test method for surface burning response of different building materials which was published in the year 2022 and is available for preview and purchase at the reference link.

ASTM standard test method for testing the surface burning response of different building materials which was published in the year 2023 and is available for preview and purchase at the reference link.

Test method designed to obtain reliable values for the WVTR of plastic film and sheeting which was published in the year 2020 and is available for preview and purchase at the reference link.

Webpage for searching all of ASTM's standards, books, journals, and technical articles.

Document providing information on correct storage techniques for lumber to manage moisture.

ENERGY STAR webpage describing the benefits of storm windows and a link to a product list.

Webpage providing an ENERGY STAR climate zone map and criteria for ENERGY STAR storm windows per climate zone.

Article providing fundamental information and recommendations for shading windows for energy savings.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

Fact sheet describing the test procedure for wind and wind driven rain resistance of discontinuous roofing systems.

DOE-sponsored report describing the experimental design and results of testing the energy performance of Hunter Douglas double-cell cellular shades under various control schemes in the Pacific Northwest National Laboratory’s Lab Homes.

Projectile missile testing of various wall panel configuration to understand how the different wall constructions would perform when struck with wind driven debris from a hurricane.

Article from Green Building Advisor on the importance of window selection in hot climates, with an emphasis on window glazing.