Library

Database describing FEMA preparedness webinars including natural hazard preparedness.

Fact sheet describing how to prepare for a natural disaster and assemble a disaster supply kit.

Database of approved products that meet the requirements of the High Velocity Hurricane Zone.

This page provides important information on how to protect yourself and your family if you suspect that you might have vermiculite insulation from Libby, Montana.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

A fact sheet providing tips on how to assemble a kit of food, water and other disaster supplies in the event of an emergency.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

Report describing the testing of various siding materials for their ability to resist bullets from small firearms.

Fact sheet describing how to install bracing to retrofit roof dormers for increased wind resistance.

FEMA information on safe room funding to regional governments.

Report covering the planning, design, construction, and operation of residential and community safe rooms. Written for architects, engineers, building officials, local officials and emergency managers, and prospective safe room owners and operators.

Website providing an introduction to the concepts and principles of seismic design.

Report from FEMA describing techniques for floodproofing structures.

Description webpage providing information about home fire safety during sever weather for consumers.

Website providing the pros and cons of different siding materials for home building, including wood, vinyl, fiber cement, stucco, brick, metal, and stone.

Report informing building stakeholders about the risks a snow event poses to their buildings, preventative measures to take before the snow season, and actions that should be taken before, during, and after a snow event.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2022, and is available for preview and purchase at the reference link. There are also other versions of...

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2023, and is available for preview and purchase at the reference link. There are also other versions of...

ASTM standard for wood-composite decking and guardrail materials under a variety of tests, including fire performance and UV resistance. Available for preview and purchase at the reference link.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

This standard specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces at various temperature ranges. This version of the standard was published in the year 2019 and is...

Test method designed to calculate an assigned air permeance of flexible sheet or rigid panel-type materials at a reference air pressure differential of 75 Pa which was published in the year 2021 and is available for preview and purchase at the reference link.

ASTM standard test method for surface burning response of different building materials which was published in the year 2022 and is available for preview and purchase at the reference link.

ASTM standard test method for testing the surface burning response of different building materials which was published in the year 2023 and is available for preview and purchase at the reference link.

Test method designed to obtain reliable values for the WVTR of plastic film and sheeting which was published in the year 2020 and is available for preview and purchase at the reference link.

Webpage for searching all of ASTM's standards, books, journals, and technical articles.

Document providing information on correct storage techniques for lumber to manage moisture.

Article describing suggested food supplies, sanitation, safety, and cooking for during and after an emergency.

Report presenting safe room designs and showing the homeowner and builder/contractor or local design professional how to construct a safe room for a home or small business.

Fact sheet describing the test procedure for wind and wind driven rain resistance of discontinuous roofing systems.

Projectile missile testing of various wall panel configuration to understand how the different wall constructions would perform when struck with wind driven debris from a hurricane.

Information sheet disucssing myths about insulated concrete forms.

Webpage providing guidance on the use of thermal mass with passive heating and cooling strategies.

Technical research paper explaining how thermal mass influences heating and cooling energy needs.

Design guide providing technical information regarding building with thermal mass.

Article detailing a case study in which thermal mass was used as part of an overall Net Zero solution for a university building.

Article from Purdue University on the potential for white paint technology to lower air conditioning usage requirements.

Information sheet about types and installation of insulation.

Website providing guidance for people to find and use tools, information, and subject matter expertise to build climate resilience.

Guide providing information about controlling rainwater through use of drainage planes.

Technical fact sheet highlighting important building connections and illustrating the proper use of various types of connection hardware; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Article describing how adhesives can be used to make homes in high-wind locations stronger and how adhesives could be too effective resulting in overloading foundation anchors under earthquake loads.

A review on the knowledge about ventilated wall claddings from field performance and hydrothermal modeling.

Website describing proper methods for installing vinyl siding on homes.

Standard that provides expanded and updated requirements for producing, marketing, and specifying plywood for construction and industrial uses.

A builder checklist guide for the water management of properties with appropriately-designed building technologies.

A heat map showing the average number of tornadoes per year across the United States

Article explaining the importance of expansion tank knowledge.