Library

Document providing a roadmap to aid Habitat for Humanity affiliates in building high performing houses by using materials and techniques that are affordable, do not add any maintenance burden, and are volunteer friendly.

Report assessing slab-on-grade foundation insulation energy savings.

Report that considers a number of promising wall systems that can meet the requirement for better thermal control.

Report providing testing methodology to evaluate structural rim header designs over openings up to 6 ft. wide and applicable to one- and two-story homes.

Report with test results that serve as a baseline of data for further material tests of other high-R wall systems and for comparison to whole-house wind pressure testing.

Report providing a collection of fact sheets describing guidance for constructing homes in wildfire zones.

Research study investigating the factors influencing consumer adoption of HEDs and evaluating the resulting electricity consumption.

Online calculator for estimating payback of adding additional insulation to your house.

A comprehensive list of all ENERGY STAR home performance programs.

Guidebook that provides information on earthquake hazards that can damage homes, the design and retrofit of earthquake resistant housing, and how to find more information on earthquake safety.

Report documenting short-term test results of the Shift House and compares the results of Passive House Planning Package and Building Energy Optimization modeling of the project.

Report detailing an evaluation of Orlando Utilities Commission (OUC) residential energy efficiency demand side management (DSM) programs to assess their impacts and relative measures of energy and economic performance.

Report presenting construction methods, building products, appliances and equipment of four single-family houses that achieve dramatic energy reductions and approach “net zero energy” use.

A report describing how to build a high-performance affordable house to achieve 30% whole house energy savings in the mixed-humid climate region.

Article summarizing for potential homeowners items to check or demand from the builder in designing a home for a cold climate.

Website that explains and provides diagrams for covering up above-grade rigid foam insulation.

Information sheet presenting techniques for installing cellulose insulation.

Blog entry describing methods for insulating basement walls on the interior or exterior.

An article and video of a breakdown on the preparation and installation of basement insulation.

Article from Montana State University Extension explaining how proper insulation techniques can greatly reduce the risks of ice dams on roofs in cold climate zones.

Factsheet describing re-siding retrofits containing exterior insulation and window upgrades aimed at improved energy savings and comfort.

Factsheet describing the performance criteria and key components of DOE Zero Energy Ready homes.

Factsheet describing the importance of building enclosures and their impact on energy efficiency.

Article describing issues with condensation in unvented attics insulated with open-cell spray foam.

Report detailing the design and construction of 10 new houses under the Wyandotte Neighborhood Stabilization Program 2.

Article outlining the casuses and solutions for ice dam problems.

Wildfire guidance for homes located in the wildland urban interface, focused on site design and individual pieces of the home.

Research study describing the impact resistance performance of advanced framed wall systems with insulating sheathing as the primary sheathing from wind blown debris.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Video describing how a frost-protected shallow foundation (FPSF) is constructed and including use of a stay-in-place EPS (expanded polystyrene) footing form that provides insulation and simplifies the installation of frost-protected monolithic concrete slab foundations.

Article from Building Science Corporation explaining 'wash and wear buildings' that are designed to be flooded and washed out afterwards.

Article explaining installing cavity insulation.

Fact sheet describing principles of insulating steam distribution and condensate return lines as an effective way to prevent energy loss.

A guide for users and energy raters of insulated siding as home insulation.

Article describing how insulated siding can save homeowners energy by providing continuous exterior insulation.

Website providing builders with information about meeting RESNET Grade 1 criteria when installing insulation.

Guide describing the use of a collaborative, multidisciplinary process that considers and optimizes the building as an entire system including its technical equipment and surroundings for efficient, sustainable, and cost-effective construction and operation over the building’s entire lifespan.

Article outlining the use of spray polyurethane foam in residential buildings.

Report that describes BSC's Houses That Work II (HTWII) climate-specific technical resource, beginning with an overall HTWII introduction and four sections explaining the four most important hygro-thermal climate regions: Hot-Humid, Mixed-Humid, Cold, and Hot-Dry/Mixed-Dry.

Research study describing field testing performed in 32 two-story Florida homes to characterize wind washing failures of the house air and thermal boundary.

Report discussing how to create livable space in the attic that meets IRC code requirements by either creating a ventilated roof assembly, or and unvented attic assembly.

The purpose for this document is to provide basic guidance on the use of proven installation techniques that can be used by installers to help ensure correct “dense pack” application of JM Spider® in drill & fill applications.

Article describing walls and moisture development on them.

Article from University of Arizona on keeping homes cool during extreme heat, both personal and system changes.

Information sheet providing links and resources for insulating basements in cold climates.

Article discussing the downside to recessed can lights.

Website providing information about Knauf Insulation.

Website explaining the LEED v4.1 program and providing a portal for those who want to investigate or start a LEED project.

Webpage published by the National Fire Protection Agency (NFPA) that lists more than 300 consensus codes and standards intended to minimize the possibility and effects of fire and other risks.

Report presenting a cold climate project that examines the relationships among energy efficient single-family residential thermal enclosures, room-to-room temperature variations, and simplified space conditioning systems.