Library

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Presentation on urban land use and sustainable building design.

Brochure describing insulation approaches for homes with slab-on-grade floors.

Brochure with information about how to select and install house wrap and other weather-resistive barriers.

Article describing a research study exploring how effective interior insulation systems are at keeping basements dry and warm.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Report providing a strengths, weaknesses, opportunities, and threats (SWOT) analysis inherent to different models as a way of thinking about the transition from traditional business models into a viable model for delivering deep energy retrofits.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Report about seeking a 30% source energy savings targets over a comparable 2009 International Energy Conservation Code-built home in the cold climate zone, using simple measures.

Report developed for Habitat for Humanity about lessons learned from demonstration retrofit projects undertaken by Habitat for Humanity affiliates in New York, Maryland, and Pennsylvania; with building systems consulting and technical assistance provided by Steven Winter Associates.

Article about installing balanced ventilation systems.

Article describing thermal bridging, construction practices that encourage thermal bridging, and solving thermal bridging through continuous exterior insulation.

Article describing the evolution of the IRC to permit class 3 vapor retarders (latex paint) in walls coupled with exterior continuous insulation to allow drying and reduce condensation risk.

Article describing how an affordable multifamily building achieved energy savings for the same cost as code-minimum construction.

Website providing consumer tips for using natural gas safely in the home, including guidance on cooking, fireplaces, ventilation, pilot lights, piping, etc.

Report about partnership to build three communities of net zero houses.

Information sheet about types and installation of insulation.

BSD-102 report providing guidance about whether to construct a vented or unvented attic based on hygro-thermal zone.

Article describing the impact of increasingly stringent ventilation standards on multifamily buildings, highlighting the inefficiencies and challenges of exhaust-only ventilation in tightly sealed enclosures, the complications of achieving balanced ventilation, and the unintended consequences of...

Presentation describing the challenges of insulating an existing basement, presented to the Building America residential energy-efficiency stakeholder meeting.

This study uses a computer simulation approach to examine the energy and indoor air quality implications of passive and hybrid ventilation systems.

Document presenting analysis results, focusing on relative humidity (RH) excursions, which are defined as unique events of indoor RH above a threshold.

Research study comparing TRNSYS Type 604 pipe model against laboratory pipe heat loss test data and detailed field monitoring data.

Preliminary results of two monitored lab homes constructed to represent the thermal characteristics of typical existing Florida homes are presented.

Building science report describing issues with vented attics in hot-humid climates and how sealed attic construction may be a solution.

A review on the knowledge about ventilated wall claddings from field performance and hydrothermal modeling.

Report describing the formation of icicles and ice dams along poorly ventilated roofs and how to mitigate ventilation issues with insulation and vents.

Information sheet about proper ventilation and air sealing.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2010, and is available for...

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2013, and is available for...

This report examines indoor air quality in post-2013 homes across various climates, focusing on contaminant levels, ventilation equipment usage, and control measure impact, with regional data from Florida, Georgia, and South Carolina.

ENERGY STAR overview on certified ventilation fans.

Standard that provides procedures and methods for meeting minimum ventilation and indoor air quality requirements to engineers, design professionals, owners, and jurisdictional authorities where model codes have been adopted. This is the current version of the standard, which was published in the...

Report describing the use of attic ventilation to control moisture in cathedral roofs and avoid the formation of ice dams.

Guide providing information on controlling attic ductwork sweating.

Publication with installation guidance for vinyl siding.

Report covering the migration of wind-blown embers in roof vents.

Report describing a field study of 31 homes to test envelope and duct leakage and fan flowrates, and to determine ventilation operation characteristics.

Fact sheet describing how weatherstripping can be an easy and cost-effective way to save money on energy costs and improve comfort by reducing drafts.

Report describing sloped roof assemblies with high levels of thermal performance.

An article describing a way to protect drain and ventilation holes in brick veneer siding against pests. Selecting a fine screen mesh opening (1/55-inch or 0.5-mm) is important to guard against small insects such as subterranean termites.

EPA coronavirus Q&A discussing the role of HVAC filters in dealing with COVID-19.

Document describing different spray foam materials including some pros and cons and technical specifications.

Brochure about how to install and use a whole-house fan.

Report summarizing results from a case study about whole-house mechanical ventilation systems in Chicago.

Report describing work conducted by the Building Science Corporation (BSC) Building America Research Teams Energy Efficient Housing Research Partnerships project.

Introductory guide to air sealing the envelope of a home to reduce wasted energy and save on energy costs.

Article describing the impacts of wildfire smoke on indoor air quality and some ways ASHRAE is responding.

Article describing sustainable community development of near zero energy homes in Greenfield, Massachusetts.