Library

Guide informing architects and engineers about designing buildings to be constructed with structural insulated panels.

A guide on the use of rain barrels for greater water efficiency and use in gardens and lawns.

A research paper exploring the installation and mounting of solar photovoltaic (PV) panels on rooftops and the challenges faced by system designers and installers.

Simple web-based tool allowing homeowners to calculate the potential savings from installing a cool roof.

A PDF containing the SERC Solar PV System Field-Inspection Checklist.

Information about dense pack, cellulose insulation.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.

Computer simulations comparing International Journal of Advanced Structural Engineering wind pressure differences between a gable-ended roof versus a hip roof versus a pyramidal-shaped roof.

Webpage from U.S. Department of Energy describing using Earth-Sheltered home building techniques in hot climate zones.

Report on problems and solutions with EIFS stucco wall cladding systems.

Report outlining the steps of translating a new home construction scope of work (SOW) to SOW for retrofit.

Website describing the U.S. Environmental Protection Agency's ENERGY STAR New Homes and Apartments program with links to builder and homeowner resources.

Document providing descriptions of the many insulation options available to homeowners, along with guidance on where, when, and how to install insulation throughout your house.

Research study examining efficiency retrofit opportunities, typical renovation practices, and pathways for achieving U.S. Department of Energy (DOE) goals for existing homes in Florida.

Report investigating performance and energy savings potential of heat pump water heaters.

Document presenting a simple starting point to determine the most cost-effective Energy Savings Measure Packages (ESMP) for existing homes to achieve 15% and 30% savings in 37 locations across the United States.

Homebuilding’s simple payback estimator for an insulation upgrade – the type and amount of insulation, square footage of the area, recent utility bill, and a quote from insulation contractor.

Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.

Information sheet briefly summarizing double stud with spray foam wall construction including the advantages and disadvantages of this construction strategy.

Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.

Report exploring feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25% source energy savings.

Report analyzing results in crawlspace retrofits in multifamily buildings.

Report summarizing post-retrofit results for 13 existing homes in a deep energy retrofit pilot program.

Report evaluating opportunities to improve and streamline delivery of residential retrofit measures.

Research study documenting market-ready energy solutions to improve the efficiency of new affordable housing in the marine climate of Washington State.

Report examining implementation of an exterior insulation and over-clad strategy for brick masonry buildings in Chicago.

Case study describing novel technique for installing exterior spray foam on foundation walls that uses high-pressure water sprayer and a “hydro vac” to remove dirt along the foundation wall.

Report about an expert meeting focused on issues surrounding cladding attachment and performance of walls with exterior insulating sheathing.

Expert meeting report describing the need for greater understanding of foundation systems including moisture and insulation issues.

Expert Meeting about interior insulation retrofit of mass masonry wall assemblies held on July 30, 2011.

Report presenting the process of a residential retrofit project for houses in the states of Florida and Alabama, including findings at the time of reporting and highlights of the first home to meet the target HERS Index of 70.

Fact sheet describing the Extended Plate Wall (EPW) a system that incorporates a 2-inch layer of foam plastic insulative sheathing within the framing for top and bottom plates, streamlining air sealing, window and door installation, weather resistive barrier application, and cladding attachment for...

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Research study developing baseline engineering analysis to support the installation of thick layers of exterior insulation (2 in. to 8 in.) on existing masonry walls and wood framed walls.

Article from Building Science Corporation on construction techniques for extreme heat conditions in Dubai and Las Vegas.

Fact sheet describing how to prepare for hurricane season and mitigate damage from floods and high winds.

A recovery advisory guide presenting important recommendations to reduce wind and water infiltration damage to new and existing residential buildings.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Journal article reporting on field experience of unvented cathedralized (UC) attics in several environments in the United States.

Report describing research about a test implementation of an unvented tile roof assembly in a hot-humid climate.

Report to understand the long-term moisture performance of unvented roof assemblies with fibrous insulation.

Study reporting the results of comparative testing of the effect of various roof types on cooling energy performance in a test facility.

Manual for proper installation practices, industry standards and the code requirements of roofing tiles for the Florida market.

Article discussing flow-through assemblies of walls.

Journal article describing lessons learned from updating a 16-year-old deep-energy retrofit.

Article describing the effective R-values of various subslab insulation products, including foil bubble pack.

Website with information for consumers about solar thermal systems for homes.

Report outlining the energy upgrade package implemented in Ft. Benning, GA, Indianhead Townhomes project and the findings of the Southface Energy Institute's post-renovation analysis.

Report about development of effective strategies to reduce the overall building energy use in line with Building America goals in this modestly priced market rate project.