Library

Article describing utility rates, net metering policies, installation costs, financial incentives, and other info for both consumers who are interested in installing renewable energy systems and for energy justice and clean energy advocates.

Fact sheet describing best strategies to bring ductwork on single-story homes with a slab-on-grade foundation in hot, dry climates into the conditioned envelope of the home intending to highlight the pros and cons of multiple ductwork integration strategies, including traditional duct systems in...

The research report outlines a practical and cost-effective strategy utilizing central HVAC systems to optimize humidity control and ventilation in energy-efficient homes located in hot-humid climates, demonstrating significant improvements without requiring complex equipment upgrades.

Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Article describing recessed lighting, which if installed incorrectly may contribute to air leakage and compromise building envelope efficiency.

Technical report describing how the FSEC Energy Research Center explores low-cost space-conditioning upgrades for existing homes by integrating centrally located, high-efficiency ductless mini split heat pumps with older but functional central space conditioning systems, aiming to achieve energy...

Report describing the business case of hosting a Level 2 electric vehicle (EV) charging station in New York, including analysis of real-world data on equipment use, costs, revenue, and assumptions derived from industry reports and original research.

Article by the Canadian Government on attic ventilation and considerations for moisture and ice dams.

Report covering interior energy retrofits of masonry buildings.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Report describing the best practices for the safe, efficient, and compliant installation of residential air source heat pump water heaters (HPWH) in California, aligning with the state's climate goals and providing guidance for educators, installers, and industry stakeholders.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Web based tool providing decision-making guidance for selecting wall assembly components.

Article describing the principle of capillarity in construction materials.

Installation manual for installing metal panel siding.

Article describing how closed crawlspaces can do "double duty" by controlling moisture and providing energy savings.

An article illustrating common errors found in fiber cement siding installations. Many of these errors and poor flashing examples apply to siding materials beyond fiber cement siding.

Manual assisting architects, engineers, owners and roofing contractors for designing, specifying and installing roof tiles in areas of snow and ice.

Installation manual describing proper installation practices, industry standards and the code requirements of roofing tiles.

Guidance from Zero Energy Project on construction techniques for warmer climates, such as home orientation, and insulation requirements.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

Website providing building science based guidance and training for residential construction.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Report covering exterior energy retrofits of masonry buildings.

Information about dense pack, cellulose insulation.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

Article describing EV charging, charger features, and other considerations for picking and installing EV chargers.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

A article about the best practice method of installing fiber cement siding, to install flashing at the butt joints of the siding boards, rather than face caulking the butt joints afterwards.

Report describing the advantages and best practices for installing heat pump water heaters (HPWH), highlighting their improved energy efficiency, reliability, and critical considerations such as condensate management, proper sizing, and optimal installation location to enhance performance and...

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.

Article describing how omission of two small but critical wall details, a kick-out flashing and a weep screed, lead to extensive water damage to a wall.

Information sheet presenting techniques for installing cellulose insulation.

Factsheet describing how to partially install a heat pump in a manufactured home in the manufactured home factory.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

A guide for users and energy raters of insulated siding as home insulation.

Website providing builders with information about meeting RESNET Grade 1 criteria when installing insulation.

The purpose for this document is to provide basic guidance on the use of proven installation techniques that can be used by installers to help ensure correct “dense pack” application of JM Spider® in drill & fill applications.

Article describing walls and moisture development on them.

Article providing guidance for installing manufactured stone veneer, including information on rainscreens.

Website providing information about Knauf Insulation.

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Siding installation guide for Ply Gem Siding Group products.

Article describing how moisture accumulates inside of structures and issues that result.

Website providing guidance about mold and moisture for homes, schools, multifamily and commercial buildings.

Online course providing an overview of mold prevention and mold remediation.

Article describing mulch requirements and benefits.

An article about double-hung windows.