Library

Information sheet about how to reduce thermal bridging in walls.

Fact sheet describing design and construction practices to reduce the likelihood of water intrusion in walls and foundations in residential construction.

Document covering basic moisture control principles in the design of above-grade building enclosures; driving rain as a moisture load on walls; a classification system of the various rain control strategies available for walls; and good design practises for walls.

Article describing rammed earth construction

Searchable database of wall cladding and coating products that have undergone solar reflectance and thermal emittance testing.

Report covering the reconstruction of flood damaged homes.

Webpage explaining how to mitigate heat loss through roofs for ice dam prevention.

This study used an advanced airflow, energy and humidity modeling tool to evaluate the potential for residential mechanical pre-scooling strategies to reduce peak electriciy demand.

Fact sheet describing best practices in installing leak-free refrigerant systems, including specifics on creating flare joints and brazed joints, pressure testing, vacuum testing, and charging the system with refrigerant.

Table in the IRC describing bracing requirements for specified wind speeds and building story locations.

Technical bulletin describing National Flood Insurance Program (NFIP) requirements for flood openings in foundation walls and walls of enclosures below elevated buildings.

Technical report describing the research and development of the Ventilation-Integrated Comfort System (VICS) which is a specifically designed, energy-efficient solution that seamlessly integrates with low-capacity, ducted heating, and cooling systems, offering controllable, balanced energy recovery...

Report describing information from DOE about rules and standards for residential air conditioners and heat pumps.

Webpage describing a DOE Cold Climate Heat Pump Challenge. The challenge engages industry partners and focuses around the Cold Climate Heat Pumps, a more environmental and efficient heating alternative to traditional heating.

Paper covering a parametric study of foundation heat exchanger-based ground source heat pump systems for several house configurations in a range of European locations, with an emphasis on determining feasible combinations.

Report discussing instrumentation methods and field operation characteristics of two GSHPs in test houses, including a comparison between the manufacturers listed COP values and the COPs calculated from field data.

Report describing a study using parametric computer simulations of 112 single-family and 63 multi-family residential building prototypes to quantify the contributions of building components such as roofs, walls, windows, infiltration, outside air, lighting, equipment, and people to the aggregate...

Website providing resources for seismic retrofits for builders and homeowners as well as city permit requirements from the City of Portland OR.

Report providing architects, designers, and homeowners with information to make house plans useful for constructing a more wind resilient structure.

Report describing the testing of various siding materials for their ability to resist bullets from small firearms.

A quick-reference guide advising homeowners on how to elevate and protect outdoor HVAC equipment from high winds and floods.

Fact sheet describing flashing of roof penetrations to make a home more resistant to high winds, hurricanes, and rainwater intrusion.

Article describing how replacing permanent split capacitor (PSC) motors with electronically commutated motors (ECM) can boost bottom line for HVAC contractors as well as improve customer comfort and satisfaction.

Information about a roof retrofit using a metal, cool roof system.

Fact sheet describing the importance of proper roof and deck flashing, and typical and enhanced flashing techniques for coastal homes; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Web page providing an overview of room-level air conditioning systems such as window units and mini-splits.

Website providing information about INSULSPAN structurally insulated panels.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Fact sheet outlining the research behind how smart ventilation controls boost energy efficiency and indoor air quality, including research findings from seasonal temperature, timer, and real-time weather-based controls showing that all three systems showed potential for energy savings while...

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Job Process sheet for the manufactured housing industry showing how to split and notch insulation batts to fit around electrical boxes and wiring in a factory production environment.

Guide describing the installation of windows in walls that have foam plastic insulating; guide provides several methods for attaching, supporting, and flashing windows in walls with rigid foam sheathing. (Note: The link only goes to the table of contents for the guide, the full guide can be...

Standard that covers the minimum performance and acceptance criteria for an air barrier (AB) material or system for framed walls of low-rise buildings with the service life of the building wall in mind. This link directs to a preview of the current version of the standard, published in the year 2019...

Standard that covers the minimum performance and acceptance criteria for an air barrier (AB) material or system for framed walls of low-rise buildings with the service life of the building wall in mind. This link directs to a preview of the version of the standard that was published in the year 2011...

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2022, and is available for preview and purchase at the reference link. There are also other versions of...

Specification covering the standard requirements for application of full thickness Portland cement-based plaster for exterior (stucco) and interior work. This standard was produced in the year 2023, and is available for preview and purchase at the reference link. There are also other versions of...

A specification covering the application of Insulating Concrete Forms (ICFs) that act as permanent formwork for cast-in-place reinforced concrete beams & walls which was published in the year 2022 and is available for preview and purchase at the reference link.

Specification describing criteria for manufactured polymeric materials used to provide a rainscreen function, a means for the drainage of liquid moisture and the ventilation of vapor moisture that enters an above-grade exterior wall assembly which was published in the year 2019, and is available for...

Report about results of 10 test buildings in Chicago, studied to identify best practices for methodology, typical costs, and energy savings associated with steam system balancing.

Information sheet about buried ducts.

Report providing information based on research and case studies, to remodelers and consumers about opportunities to increase home energy performance.

Document explaining the benefits of evaluating and identifying energy efficiency retrofit measures that could be made during renovation and maintenance of multifamily buildings.

Report describing the equipment selection of a split system air conditioner and furnace for an example house in Chicago, Illinois, as well as a heat pump system for an example house in Orlando, Florida.

Report about proper water heater selection developed to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Report covering coating and back venting wood based claddings and trim.

Conference paper describing testing of the performance of fasteners used to attach rigid foam insulation to the exterior of walls.

Information sheet describing correct application of stucco.

Document describing issues of wind pressure resistance in walls with exterior rigid foam sheathing installed directly over framing members.

Research project evaluating the pre-and post-retrofit energy consumption of a marine climate retrofit, compare actual energy use to original predictions, and identify opportunities for cost savings in other similar retrofits in this climate.