Library

Website with information about ENERGY STAR criteria for geothermal heat pumps.

Website highlighting the DOE Building Technologies Office Grid-interactive Efficient Buildings Initiative, including technical reports, other publications, resources, and presentations.

Website article discussing the economics of ground source heat pumps.

Report presenting a cold climate project examining and alternative approach to ground source heat pump ground loop design.

Factsheet describing the uses and benefits of ground-source heat pumps for affordable housing, assisted living, dorms and hotels.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Factsheet describing how to install air source heat pumps for residential heating and cooling in cold climates.

Guide by the Northeast Energy Efficiency Partnerships on how to size heat pumps in a cold climate.

A ENERGY STAR guide on efficient heating, ventilation and cooling systems in residential homes.

Report describing the various heat pump retrofit options for multifamily buildings in the U.S., segmented by building typology and heating system, to support better environmental, economic, and health outcomes.

Presentation about heat pump water heater modeling using EnergyPlus.

Article discussing the advantages of using heat pumps and/or hydronic forced air heat instead of furnaces in high-performance homes.

Report providing information for HVAC designers, installers, and consumers about air source heat pumps.

Best Practices document providing an introduction to current photovoltaic and solar thermal building practices.

Article describing the factors that can lead to inefficient hot water distribution systems in homes.

Website for consumers describing heat pump water heater technology and linking to retailers and installers.

Article describing considerations for choosing a room-level air cleaner to improve indoor air quality.

Article describing how to use radiator inlet orifices optimize two-pipe steam heating systems.

Factsheet describing how to partially install a heat pump in a manufactured home in the manufactured home factory.

Report providing the results of an analysis of humidity control and variable refrigerant flow (VRF) system efficiency in three new multifamily buildings in New York, NY.

Webpage providing curriculum with links to presentations and problem sets for teaching an understanding of sizing cold climate heat pumps.

Report providing information about energy-efficient heating, ventilation, and cooling (HVAC) equipment options to help homeowners cut their energy use, reduce their carbon footprint, and increase their homes comfort, health, and safety.

Paper providing a comprehensive overview of HVAC system design considerations and challenges specific to multifamily residential buildings, focusing on optimizing performance and addressing common issues.

Software tool available free online that can help calculate heating and cooling requirements to accurately size HVAC equipment in as little as 15 minutes.

Correcting pressure imbalances in your HVAC system can result in a healthier, more efficient home.

Report evaluating the relative effectiveness of various control and distribution strategies to improve hydronic space heating performance in existing low-rise multifamily buildings

Report presenting improved air conditioner (AC) and heat pump (HP) modeling methods in the context of whole-building simulation tools.

Presentation on Improving Air-Conditioner and Heat Pump Modeling.

Report examining the impacts that common installation practices and age- induced equipment degradation may have on the installed performance of natural gas furnaces, as measured by steady-state efficiency and AFUE.

PDF detailing the inspection and verification guidance for WaterSense labeled new homes including indoor and outdoor efficiency requirements, and homeowner and building management education.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Fact sheet describing principles of insulating steam distribution and condensate return lines as an effective way to prevent energy loss.

Fact sheet describing the newly developed Ventilation-Integrated Comfort System (VICS) that reduces space requirements and eliminates costly ductwork for separate heating, cooling, and ventilation systems, all while enhancing performance, addressing the demand for energy-efficient homes, and...

Report describing the objective evaluation of space conditioning interactions between heat pump water heaters and home heating systems during winter 2016-2017, revealing a smaller than anticipated impact on space conditioning loads.

Article discussing indoor water management.

Report describing the results of a 21-home field study investigating the effectiveness and failure rates of whole-house mechanical ventilation systems installed in Florida homes over the last 15 years.

Research report discussing the reduction of HVAC energy consumption to meet U.S. greenhouse gas targets and DOE's energy-efficient building goals. It introduces iComfort, an IoT-based system for optimizing home comfort and energy savings.

Report on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

Guidance on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

Report presenting lab evaluation of five heat pump water heaters available in the US market today.

Report proposing mini-split heat pumps as a new retrofit option to replace resistance heating in the Pacific Northwest.

Report identifying the target market for solar water heaters and potential pathways and cost/performance targets that must be met for these systems to realize large energy savings.

Project discussing buried or encapsulated ducts and their pros and cons.

Report describing the installation and operation of forced-air heating and domestic hot water combi systems in residential homes.

Document intended for designers and installers of hydronic heating systems interested in maximizing the overall system efficiency of condensing boilers when coupled with baseboard convectors. It is applicable to new and retrofit projects.

Report providing step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time when using a thermostat setback.

Document with evaluation of 14 heat pump water heaters (including three recently released HPWH products) installed in existing homes in the northeast region of the United States.

Document covering installation of high efficiency gas furnaces, including when to install a high efficiency gas furnace as a retrofit measure, how to identify and address risks, and steps to follow for the selection and installation process.

Report describing the most cost-effective ventilation and indoor air quality solutions for multifamily homes that meet ASHRAE 62.2-2016.

Research study outlining results of monitoring a low temperature heat pump.