Library

Proposed HVAC filter labeling standard and underlying analysis by the California Energy Commission.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2016, and is available for...

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings; published in the year 2019, and is available for preview and purchase at the...

Standard that describes the minimum requirements for residential buildings to achieve acceptable indoor air quality via dwelling-unit ventilation, local mechanical exhaust, and source control. This version of the standard was published in the year 2022, and is available for preview and purchase at...

Standard 680 establishes definitions, classifications, test requirements, data requirements, ratings, operating requirements, marking and nameplate data and conformance conditions for residential air filter equipment.

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Standard describing methods for testing the airtightness of buildings and HVAC equipment.

Test method that measures the capture efficiency of wall-mounted domestic range hoods under controlled conditions in a test chambers which available for preview and purchase at the link and was published in the year 2018.

Report addressing barriers to information, contractor resources and cost savings associated with steam balancing multifamily buildings.

Report about results of 10 test buildings in Chicago, studied to identify best practices for methodology, typical costs, and energy savings associated with steam system balancing.

Report providing information based on research and case studies, to remodelers and consumers about opportunities to increase home energy performance.

Report about the impact on the loads when common safety factors are applied to the load calculation process using two houses that meet the 2009 IECC prescriptive path modeled as the accurate baseline.

Document identifying differences between the requirements for construction documents for high performance housing and the documents that are typically produced for conventional housing.

Report following the evolution of the construction quality process from its development for new homes to its application construction of a HPH with enhanced specifications, and its application in a crawlspace renovation.

Document covering the pros and cons of compact air distribution systems and the decision criteria that must be considered early in the whole-house design process.

Report intending to provide useful information as the DOE/BA develops and implements comprehensive communications and outreach strategies for demonstration homes.

Report describing the equipment selection of a split system air conditioner and furnace for an example house in Chicago, Illinois, as well as a heat pump system for an example house in Orlando, Florida.

Document targeting retrofit program managers, retrofit contractors, policy makers, academic researchers, and non-governmental organizations that work to realize energy savings from home energy upgrades (HEUs).

Document serving as a starting point that features initial tools and resources for teams to start collaborating to continually improve the energy efficiency and durability of new houses.

Report describing findings from research related to heating, ventilation, and air conditioning (HVAC) companies that have made the decision to transition to whole house performance contracting (WHPC).

A report describing methods for constructing homes and treating soils to reduce the risk of termites in buildings.

This document covers a description of the need and applied solutions for supplemental dehumidification in warm-humid climates, especially for energy efficient homes where the sensible cooling load has been dramatically reduced.

Question and Answer article in Energy Design Update describing the cost and savings benefits of electronically commutated motors (ECMs) for HVAC equipment.

Report providing performance results of a home's heat pump water heater and whole-house dehumidifier over a six-month period.

Report evaluating a test home built in Atlanta, GA in the mixed-humid climate zone. The report outlines the features of the house, discusses the implementation of the energy efficient design, and presents the results of short-term characterization testing.

Document about NREL's repository of residential building characteristics and historical energy use data, used to improve accuracy of residential energy analysis tools.

The Technician's Guide equips practitioners with the knowledge to properly implement all of the measurement procedures required in the HVAC QI Specification.

This guide and workbook offers practitioners with the knowledge to properly implement the measurement and documentation procedures required in the ANSI/ACCA 5.

Research study exploring retrofit procedures and simulated post-occupancy data for three homes in an effort to determine the effectiveness of retrofit packages.

Report using data from various sources to characterize the impact on human health and property damage from indoor environmental quality and other hazards.

Report outlining a case study about a building project in the hot-humid climate zone.

Article from Texas A&M University and the University of Maryland analyzing why and how urban flooding happens and what can be done to mitigate damage.

Fact sheet poster describing a series of fact sheets and checklists for homeowners to share with contractors to help achieve cost-effective, energy-efficient retrofits for dozens of common home renovation projects.

Standard providing industry-backed information for assessing new and existing HVAC systems, evaluating and verifying the cleanliness of HVAC system components, preventing job related hazards and guiding the cleaning and restoration of HVAC systems to a specific level of cleanliness.

Report providing a strengths, weaknesses, opportunities, and threats (SWOT) analysis inherent to different models as a way of thinking about the transition from traditional business models into a viable model for delivering deep energy retrofits.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Report about seeking a 30% source energy savings targets over a comparable 2009 International Energy Conservation Code-built home in the cold climate zone, using simple measures.

Report developed for Habitat for Humanity about lessons learned from demonstration retrofit projects undertaken by Habitat for Humanity affiliates in New York, Maryland, and Pennsylvania; with building systems consulting and technical assistance provided by Steven Winter Associates.

Research study identifying barriers, industry status, critical obstacles to documenting added value from energy efficiency improvements, current opportunities to support reporting about energy efficiency, and next steps toward enabling energy efficiency financing market transformation.

Even as the worst housing market correction in more than 60 years appeared to turn a corner in 2009, the fallout from sharply lower home prices and high unemployment continued.

Article about installing balanced ventilation systems.

Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces; is the current version of the standard, which was published in the year 2021, and is available for preview and purchase at the...

Guide from Energy Star on smart thermostats and offering some guidance for choosing one.

This report describes the results of a multiyear research project that investigated the energy savings attributable to thermostatic radiator valves (TRVs) installed on one-pipe steam distribution systems.

Report on a project conducted to better understand the current usage of thermostatic radiator valves by key market players in steam and hot water heating and to conduct limited experiments on the effectiveness of new and old thermostatic radiator valves as a means of controlling space temperatures...

Webpage describing methods to save energy at home, including turning down your water heater set point, scheduling your HVAC system, adding or fixing weatherstripping, and changing HVAC system filters, among other tips.

Brochure describing HVAC filter options for efficiency and IAQ.

Paper describing testing for the first of a series of six near net-zero-energy test houses, using the results to work towards the construction of a true net-zero-energy house.

Report discussing Building America whole house systems research within the broad effort to reduce or eliminate the environmental impact of building and provides specific recommendations for future Building America research based on Building Science Corporations experience with several recent...

Information sheet describing transfer ducts and grilles for HVAC.