Library

Article from Montana State University Extension explaining how proper insulation techniques can greatly reduce the risks of ice dams on roofs in cold climate zones.

Checklist for verifying FORTIFIED levels and documentation needed.

A structural insulated panel (SIP) roof has no embedded lumber in the structure, and therefore nothing substantial for attaching PV array and solar hot water mounts. Single or double lumber splines could be put into the panels, or I-joists at 4-foot intervals could be added.

Factsheet outlining the advantages of using heat pumps, which are an efficient way to heat and cool a home.

Code describing the requirements for existing site-built single-family homes to receive roof-to-wall retrofits when re-roofing.

A document aimed at reducing the vulnerability of a gable end roof to wind damage in a hurricane.

Report describing the hurricane retrofit guide with focus on walls and wooded framed walls.

Webpage providing curriculum with links to presentations and problem sets for teaching an understanding of sizing cold climate heat pumps.

Paper providing a comprehensive overview of HVAC system design considerations and challenges specific to multifamily residential buildings, focusing on optimizing performance and addressing common issues.

Correcting pressure imbalances in your HVAC system can result in a healthier, more efficient home.

Article describing the effect metal roofs have on thermal performance in hot-humid climates.

Article describing the second step of a three-step process for the installation a tubular skylight, using peel-and-stick flashing tape instead of roof cement, and integrating the roof underlayment with the flashing.

Article describing how to counterflash a chimney by tucking the upper pieces of counterflashing into the chimney mortar joints and overlapping them over the various pieces of base flashing, which are nailed to the roof deck.

Article describing the insurance savings of a home with a hip roof versus a gable roof from the perspective of an insurance advisor.

Report describing the objective evaluation of space conditioning interactions between heat pump water heaters and home heating systems during winter 2016-2017, revealing a smaller than anticipated impact on space conditioning loads.

Article describing how the configuration of surrounding buildings affects the wind loads on a hip roof in a low-rise building.

Report discussing how to create livable space in the attic that meets IRC code requirements by either creating a ventilated roof assembly, or and unvented attic assembly.

Report describing ways to retrofit a home to make it more hurricane resistant.

Webpage describing how to conserve heat or find alternative heat sources during a power outage to keep one room warm.

Article showing steps for kick out flashing at roof-wall intersection.

Article describing a technique for installing a skylight and avoiding potential water leaks with the use of a peel-and-stick (or self-adhesive) membrane under the flashing.

Web article describing two options for sizing ductless minisplit heat pumps, including a free HVAC sizing tool.

News article describing the state of the residential battery storage market.

Web article describing many ways homeowners, contractors, and builders can make homes more resistant to hurricanes, tornadoes, high winds, floods, and hail.

Fact sheet describing important roof-to-wall and wall-to-foundation connection details for masonry construction in coastal areas, including load paths, building materials, and reinforcement; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Article describing the flashing of roofs and what to look for, targeted at home inspectors.

Article describing methods for insulating and air sealing vented and unvented roofs in various climates zones.

Project discussing buried or encapsulated ducts and their pros and cons.

Report describing the installation and operation of forced-air heating and domestic hot water combi systems in residential homes.

Measure Guideline describing how to assess and carry out the isolation of natural draft combustion appliances from the conditioned spaces of low-rise residential buildings.

This Measure Guideline provides design and construction information for a deep energy enclosure retrofit solution of a flat roof assembly.

Study investigating measured cooling energy savings in homes across the U.S. from the installation of roofing with higher solar reflectance.

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

An installation training manual discussing the installation of metal roofing materials and related accessories, for both new construction and retrofit projects.

A Recovery Advisory guide reccomending practices for designing and installing metal roof systems that will enhance wind resistance in high-wind regions (i.e., greater than 90-miles per hour [mph] gust design wind speed).

Report covering the selection of roof vents for rainwater resistance.

This report investigates whether mini-split heat pumps can live up to their potential for one market segment: multifamily retrofits.

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

Report providing extensive guidance on controlling moisture in building envelopes through proper selection and installation on air, water, thermal, and vapor barriers.

Standard covering overs mounting systems, including mounting devices, clamping devices and ground lugs for use with photovoltaic modules and panels and contains requirements for ground-mounted and roof systems as part of a nonstructural building component.

Database compiling extended capacity data for numerous cold climate heat pump manufacturers and models.

Guide providing information on controlling attic ductwork sweating.

A document providing guidance on integrating a PV array with a roof system.

A website providing information on the purpose of burners and the components used in burners.

Study examining how design features, such as building envelope openings and compartmentalization, affect the wind pressure in typical low-rise buildings with gable and hip roofs.

Report covering wind loading on roofing assemblies.

Website providing guidance on passive heating, cooling, and lighting methods.

Article from Williams College on the key elements of passive solar design for homes.

Article investigating how a linear input/output relationship can be used as a simple model of the performance of a combination hydronic heating system over heating only, DHW only, and combined loads.

Blog article describing considerations for how to use trees for shading to reduce cooling energy demand.