Library

Information guide describing issues with concrete floors, in multiple climate zones.

Report covering insulating crawlspaces.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel sheathing (WSP) as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low...

Part I of the Guide addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) sheathing as exterior sheathing, gypsum board as interior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories in height.

The Guide addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low...

Document presenting step-by-step process for installing rigid insulating sheathing over wood studs or house wrap.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Research report anayzing the results of a large retrofit project, turining an old school into near zero energy consumption apartments in Greenfield MA.

Article describing the difference between conditioned or unvented attics and unconditioned or vented attics.

Research study examining the opportunities for cost-effective energy efficiency and renewable energy retrofits in residential archetypes constructed before 1980 (Pre-Code) in 14 U.S. cities.

Information sheet about crawlspace insulation, including installation details.

Article discussing whether or not to seal and insulate crawlspaces.

Job Process sheet for the manufactured housing industry showing how to cut insulation batts to fit wall cavities in a factory production environment.

Article describing the importance of air sealing, insulation, and roof ventilation in reducing the likelihood of ice dam formation on roofs in cold snowy climates.

Report covering exterior energy retrofits of masonry buildings.

Guide informing architects and engineers about designing buildings to be constructed with structural insulated panels.

Information about dense pack, cellulose insulation.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Case study describing foundation wall moisture studies at a research facility in Minnesota run by Building America team NorthernSTAR.

Webpage from U.S. Department of Energy describing using Earth-Sheltered home building techniques in hot climate zones.

Report on problems and solutions with EIFS stucco wall cladding systems.

Report outlining the steps of translating a new home construction scope of work (SOW) to SOW for retrofit.

Website describing the U.S. Environmental Protection Agency's ENERGY STAR New Homes and Apartments program with links to builder and homeowner resources.

Document providing descriptions of the many insulation options available to homeowners, along with guidance on where, when, and how to install insulation throughout your house.

Research study examining efficiency retrofit opportunities, typical renovation practices, and pathways for achieving U.S. Department of Energy (DOE) goals for existing homes in Florida.

Report investigating performance and energy savings potential of heat pump water heaters.

Document presenting a simple starting point to determine the most cost-effective Energy Savings Measure Packages (ESMP) for existing homes to achieve 15% and 30% savings in 37 locations across the United States.

Homebuilding’s simple payback estimator for an insulation upgrade – the type and amount of insulation, square footage of the area, recent utility bill, and a quote from insulation contractor.

Information sheet briefly summarizing double stud with spray foam wall construction including the advantages and disadvantages of this construction strategy.

Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.

Report exploring feasibility of designing prescriptive retrofit measure packages for typical Chicago region multifamily buildings in order to achieve 25% source energy savings.

Report analyzing results in crawlspace retrofits in multifamily buildings.

Report summarizing post-retrofit results for 13 existing homes in a deep energy retrofit pilot program.

Report evaluating opportunities to improve and streamline delivery of residential retrofit measures.

Research study documenting market-ready energy solutions to improve the efficiency of new affordable housing in the marine climate of Washington State.

Report examining implementation of an exterior insulation and over-clad strategy for brick masonry buildings in Chicago.

Case study describing novel technique for installing exterior spray foam on foundation walls that uses high-pressure water sprayer and a “hydro vac” to remove dirt along the foundation wall.

Report about an expert meeting focused on issues surrounding cladding attachment and performance of walls with exterior insulating sheathing.

Expert meeting report describing the need for greater understanding of foundation systems including moisture and insulation issues.

Expert Meeting about interior insulation retrofit of mass masonry wall assemblies held on July 30, 2011.

Report presenting the process of a residential retrofit project for houses in the states of Florida and Alabama, including findings at the time of reporting and highlights of the first home to meet the target HERS Index of 70.

Fact sheet describing the Extended Plate Wall (EPW) a system that incorporates a 2-inch layer of foam plastic insulative sheathing within the framing for top and bottom plates, streamlining air sealing, window and door installation, weather resistive barrier application, and cladding attachment for...

The New York State Energy Research and Development Authority (NYSERDA) is interested in finding cost-effective solutions for deep energy retrofits (DERs) related to exterior wall insulation in a cold climate, with targets of 50% peak load reduction and 50% space conditioning energy savings.

Research study developing baseline engineering analysis to support the installation of thick layers of exterior insulation (2 in. to 8 in.) on existing masonry walls and wood framed walls.

Article from Building Science Corporation on construction techniques for extreme heat conditions in Dubai and Las Vegas.

Report comparing a high-performance house with a code-built control home.

Report of a field evaluation of four novel roof designs to see how each design would reduce space-conditioned energy use so that the knowledge gained could be applied to the design of new manufactured homes.

Article discussing flow-through assemblies of walls.

Journal article describing lessons learned from updating a 16-year-old deep-energy retrofit.

Article describing the effective R-values of various subslab insulation products, including foil bubble pack.