Library

Fact sheet describing a report providing best practices for reducing damages from floods to manufactured homes.

Fact sheet providing an overview of the FEMA document Wind Retrofit Guide for Residential Buildings.

Code describing energy codes for energy-conserving and compliant designs in Florida.

Guide providing engineering seismic design and building practices based on post-earthquake research.

Article describing methods for thermally isolating a garage in a Passive House-certified multifamily building.

Vinyl siding estimating and installation guide for vinyl siding products.

Radiant, hydronics, geothermal -- they are a vital part of modern comfort and energy solutions. ACCA helps hydronics contractors operate at peak performance.

Guide describing advanced framing, a system of construction framing techniques designed to optimize material usage and increase energy efficiency.

Article describing how an airtight home shell helps achieve a tight envelope that is energy efficient and cost effective.

Report describing approaches to insulating basements in homes built to meet Energy Star levels of performance of heat loss reduction.

Article from California Earthquake Authority on the benefits of retrofitting homes to withstand earthquake forces, with a focus on foundations, walls, and chimneys.

Article Describing methods for thermally isolating multifamily parking garages.

The Builder's Guide provides the building industry with the latest and best practical information on how to apply building science principles to structures as systems in hot-humid climate regions.

Article describing the control layers (air, thermal, and vapor barriers) needed to build homes successfully in very cold locations.

Website providing CAD files and drawings of advanced framing details.

Document outlining building science principles about air flow, heat flow and moisture flow in homes.

An article discussing how different metal roof materials and attachment methods affect the ability of the roof to thermally expand and contract and the durability of different solutions.

Report about the fundamental concepts that must be understood at the planning or initial nspection of existing homes regarding surface and ground water management.

Article describing correct ways to eliminate water damage by incorporating a sacrificial layer to foundation walls and footings.

Report aimed to quantify the impact of closed crawlspaces in new homes, and investigate modeling software to ensure accuracy of energy consumption predictions in these homes.

Guide about designing and installing closed crawlspaces in the Southeast.

Volume 1 of a two-volume report providing a comprehensive approach to planning, siting, and risk management for homes constructed in coastal environments.

Website discussing building foundation problems caused by settling soil in Colorado.

Information guide describing issues with concrete floors, in multiple climate zones.

Document discussing moisture considerations and testing techniques for concrete floors.

Report covering insulating crawlspaces.

Article describing the process of constructing concrete walls

Website providing building science based guidance and training for residential construction.

Article describing research encouraging use of exterior insulation to warm interior sheathing surfaces in walls and roof assemblies to reduce the likelihood of condensation during cold weather

Report providing guidance on designing buildings to be flood resistant.

Information about dense pack, cellulose insulation.

Report providing an introduction to the NEHRP recommended seismic provisions for new buildings and other structures.

The objective of this research was to quantify the field performance of wood-frame walls clad with a variety of common claddings in a mixed-humid climate.

Report on problems and solutions with EIFS stucco wall cladding systems.

Discussion of structural thermal resistance.

Website from the U.S. Department of Energy providing consumers with information on saving energy and using renewable energy technologies.

Information sheet with details on a building enclosure designed for Albuquerque, NM, as an example for building enclosures built for hot-dry and mixed-dry climates.

Information sheet that summarizes Insulated Concrete Form (ICF) construction including advantages and disadvantages of this construction strategy.

Study characterizing how foundation heat exchangers (FHXs) used in residential ground source heat pump systems represent a potential cost savings due to their lesser first cost over other types of heat exchangers.

Documents describing the similarities and differences between the National Flood Insurance Program (NFIP) minimum requirements and the requirements of the International Codes® (I-Codes®) and ASCE 24, Flood Resistant Design and Construction, a standard referenced by the I-Codes., and illustrating...

Fact sheet discussing designs for prefabricated safe rooms built to ICC 500 standards mentioned in FEMA P-361.

Report describing dry floodproofing technologies for non-residential buildings, including information about regulatory requirements, design considerations, and descriptions of floodproofing methods and equipment.

Article describing the effective R-values of various subslab insulation products, including foil bubble pack.

Checklist highlighting the requirement for metal structural connections and materials fasteners used to retrofit or construct FORTIFIED buildings less than 3,000 ft from saltwater to be suitably protected from corrosion.

Checklist intending to clarify FORTIFIED Home™ eligibility requirements that relate to a home’s foundation.

Handbook providing guidance on the design and construction of foundations for homes, including insulation, air sealing, and water management details for basements, crawlspaces, and slabs.

Article describing a numerical model that can be used to size foundation heat exchanger (FHX) systems.

Article describing what the building codes say about frost-protected shallow foundations as a cost-saving alternative to conventional concrete foundations.

Guides describing frost-protected shallow foundations as an alternative method for building an energy-efficient foundation for a house in a cold climate that uses less concrete and saves on labor.