Library

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

Report describing the key findings from the first third-party field validation of 120-volt heat pump water heater (HPWH) technology, addressing the significant barriers to their adoption and emphasizing their potential role in reducing carbon emissions from residential water heating.

Report describing a laboratory assessment on the performance of Rheem 120-volt heat pump water heaters (HPWH), aimed at identifying optimal installation locations for these new "plug-in" models based on comprehensive testing under various conditions.

Fact sheet describing best practices in installing leak-free refrigerant systems, including specifics on creating flare joints and brazed joints, pressure testing, vacuum testing, and charging the system with refrigerant.

Report describing information from DOE about rules and standards for residential air conditioners and heat pumps.

Webpage describing a DOE Cold Climate Heat Pump Challenge. The challenge engages industry partners and focuses around the Cold Climate Heat Pumps, a more environmental and efficient heating alternative to traditional heating.

Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.

Paper covering a parametric study of foundation heat exchanger-based ground source heat pump systems for several house configurations in a range of European locations, with an emphasis on determining feasible combinations.

Report discussing instrumentation methods and field operation characteristics of two GSHPs in test houses, including a comparison between the manufacturers listed COP values and the COPs calculated from field data.

Report describing extensive renovations to a historic home.

This project analyzed combined condensing water heaters or boilers and hydronic air coils to provide high efficiency domestic hot water (DHW) and forced air space heating. Called "combi" systems, they provided similar space and water heating performance less expensively than installing two...

Article explaining the energy cost reduction and other benefits associated with installing a heat pump clothes dryer

Reports describing a mathematical methodology for assessing the seismic performance of buildings.

Article outlining the key issues related to the protection of the building envelope against seismic forces.

Technical study exploring the impact of different installation faults on heat pump performance in a single-family house.

High-density sidewall cavity insulation can be a major comfort and savings boost. It saves energy by slowing both conductive and convective losses, but only if the right things are done and done right. This always requires site-specific thinking.

Information sheet describing how to select a properly sized water heater based on household usage patterns, peak demand, and heater type—whether tankless, solar, or storage-based—to ensure efficiency and adequate hot water supply.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Webpage describing the STEP campaign encouraging the use of smart diagnostic tools to reduce installation faults.

Website providing consumers with resources to find, select and install heat pump water heaters.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Job Process sheet for the manufactured housing industry showing how to split and notch insulation batts to fit around electrical boxes and wiring in a factory production environment.

Standard describing a test method measuring air-leakage rates through a building envelope under controlled pressurization and de-pressurization which was published in the year 2019 and is available for preview and purchase at the reference link.

Standard describing two techniques for measuring air leakage rates through a building envelope in buildings that may be configured to a single zone which was published in the year 2022 and is available for preview and purchase at the reference link.

Report providing information based on research and case studies, to remodelers and consumers about opportunities to increase home energy performance.

Report describing the equipment selection of a split system air conditioner and furnace for an example house in Chicago, Illinois, as well as a heat pump system for an example house in Orlando, Florida.

Report about proper water heater selection developed to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Information sheet describing correct application of stucco.

A research paper discussing the use of foundation heat exchangers for ground source heat pump systems in European climates.

Question and Answer article in Energy Design Update describing the cost and savings benefits of electronically commutated motors (ECMs) for HVAC equipment.

Report providing performance results of a home's heat pump water heater and whole-house dehumidifier over a six-month period.

Document about laboratory testing of five integrated heat pump water heaters (HPWH).

Report describing use of the Energy in Modular (EMOD) method to design, produce, and deliver affordable, net-zero energy, low-carbon, and healthier buildings through industrialized (factory) construction of modular buildings; modeling of whole buildings and subassemblies of components, pods, panels...

Conference paper summarizing the relative performance of currently available Heat Pump Water Heaters (HPWH) models, the energy implications of different installation locations (garage, basement, or conditioned space) and ducting configurations (exhaust ducting, full ducting, or no ducting), as well...

Document providing an overview of the Thermal Bypass Checklist for the ENERGY STAR Qualified Homes program.

Guide describing details that serve as a visual reference for each of the line items in the Thermal Enclosure System Rater Checklist.

Technical report describing the impact of thermal bridging in balcony connections, presenting alternative design strategies, performance analyses, and case studies to enhance energy efficiency and reduce carbon emissions in building envelopes.

Report about partnership to build three communities of net zero houses.

BSD-102 report providing guidance about whether to construct a vented or unvented attic based on hygro-thermal zone.

Presentation report detailing Heat Pump Water Heater (HPWH) interaction with space conditioning systems in real-life test scenarios that explains some of the problems arising from these interaction and information that can be used to make the system more efficient.

Report focusing on the performance and durability of unvented-cathedralized attics in hot-humid climates with both tile and asphalt shingle roofing.

Users guide to help contractors and homeowners use the Cold Climate Heat Pump Sizing Support Tools developed by NEEP to size and select the best air source heat pumps for their cold climate location.

Website containing useful resources regarding central heat pump water heater systems.

Fact sheet describing four different efficient hot water delivery (HWD) systems, the trunk-and branch, core, whole-house manifold, and recirculation, with emphasis on system schematics, piping materials, and regulations to design and verify the systems.

Webinar presenting best practices in HVAC design and commissioning

Conference paper presented at the 2020 Summer Study on Energy Efficiency in Buildings presenting the results of an evaluation of control strategies used when new mini-splits are installed in a home with an existing HVAC system.

Report describing work conducted by the Building Science Corporation (BSC) Building America Research Teams Energy Efficient Housing Research Partnerships project.

Introductory guide to air sealing the envelope of a home to reduce wasted energy and save on energy costs.

Research study describing demonstration homes that provided a wealth of information for the building community in terms of the science, effort, and cost of increasing the energy efficiency of our nation's housing stock.

Report detailing retrofit of two existing houses in the Wyandotte Neighborhood program.