Library

Report identifying efficient, connected, smart, and flexible GEB technologies and their future potential, including barriers and opportunities, recommendations for policymakers, and research needs.

Report providing guidance on indoor air quality in single-family and multifamily housing for designers, builders, property managers, homeowners, buyers, and renters.

Report identifying the steps to take, with the help of a qualified home performance contractor, to seal unwanted air leaks while ensuring healthy levels of ventilation and avoiding sources of indoor air pollution.

A website calculator that can calculate how much you can save by switching to ENERGY STAR certified products.

Web page describing the basics of how to size and build a battery bank for electricity storage.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

A website discussing the use of consumer-grade small electric wind systems such as turbines to lower energy costs.

Fact sheet describing field validations of a smart ventilation system to assess its effectiveness in assisting low-load homes in humid environments by maintaining acceptable indoor humidity conditions while ensuring adequate ventilation and indoor air quality.

Fact sheet outlining the research behind how smart ventilation controls boost energy efficiency and indoor air quality, including research findings from seasonal temperature, timer, and real-time weather-based controls showing that all three systems showed potential for energy savings while...

Initiatives of smoke-free housing policies in New York State.

Toolkits for residents and owner/managers who live and work in federally assisted housing.

Website article describing the way solar panels are coupled to AC and DC battery energy storage systems.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings; published in the year 2019, and is available for preview and purchase at the...

Standard that describes the minimum requirements for residential buildings to achieve acceptable indoor air quality via dwelling-unit ventilation, local mechanical exhaust, and source control. This version of the standard was published in the year 2022, and is available for preview and purchase at...

Standard 680 establishes definitions, classifications, test requirements, data requirements, ratings, operating requirements, marking and nameplate data and conformance conditions for residential air filter equipment.

Standard describing methods for installing radon mitigation systems in existing residential buildings three stories or less in height which was published in the year 2021 and is available for preview and purchase at the reference link.

Detailed requirements for testing, exposure modeling, and allowable limits for modeled indoor air concentrations.

Document targeting retrofit program managers, retrofit contractors, policy makers, academic researchers, and non-governmental organizations that work to realize energy savings from home energy upgrades (HEUs).

Research project evaluating the pre-and post-retrofit energy consumption of a marine climate retrofit, compare actual energy use to original predictions, and identify opportunities for cost savings in other similar retrofits in this climate.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.

Report describing information on automatic load management systems (ALMS) for electric vehicle charging.

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Standard 55 specifies conditions for acceptable thermal environments and is intended for use in design, operation, and commissioning of buildings and other occupied spaces; is the current version of the standard, which was published in the year 2021, and is available for preview and purchase at the...

Guide from Energy Star on smart thermostats and offering some guidance for choosing one.

Webpage describing methods to save energy at home, including turning down your water heater set point, scheduling your HVAC system, adding or fixing weatherstripping, and changing HVAC system filters, among other tips.

Blog article summarizing the effects of extreme heat on air quality and lung health.

Tool designed to find utility partners that can help with the installation of EV chargers.

Article describing the impact of increasingly stringent ventilation standards on multifamily buildings, highlighting the inefficiencies and challenges of exhaust-only ventilation in tightly sealed enclosures, the complications of achieving balanced ventilation, and the unintended consequences of...

This study uses a computer simulation approach to examine the energy and indoor air quality implications of passive and hybrid ventilation systems.

Document presenting analysis results, focusing on relative humidity (RH) excursions, which are defined as unique events of indoor RH above a threshold.

Research report that validates Pinhole Insulation®, offering a cost-effective, minimally invasive solution for enhancing insulation and air sealing in enclosed roof cavities, improving R-value by 60% compared to traditional methods.

Preliminary results of two monitored lab homes constructed to represent the thermal characteristics of typical existing Florida homes are presented.

This report examines indoor air quality in post-2013 homes across various climates, focusing on contaminant levels, ventilation equipment usage, and control measure impact, with regional data from Florida, Georgia, and South Carolina.

Standard that provides procedures and methods for meeting minimum ventilation and indoor air quality requirements to engineers, design professionals, owners, and jurisdictional authorities where model codes have been adopted. This is the current version of the standard, which was published in the...

Report describing a field study of 31 homes to test envelope and duct leakage and fan flowrates, and to determine ventilation operation characteristics.

EPA coronavirus Q&A discussing the role of HVAC filters in dealing with COVID-19.

Report describing the best practices that were observed during installations of electric vehicle chargers for residential homes.

Article discussing the risks that can occur from undercutting bedroom doors to provide return airflow from bedrooms, as well as corrective measures that can be taken to address these risks.

Article describing the impacts of wildfire smoke on indoor air quality and some ways ASHRAE is responding.

Article describing the capabilities of a Tesla Powerwall and its capacity to be used during a power outage.