Library

Web article describing common issues that can cause refrigerant system flare joints to leak.

2009 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2012 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

2015 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2018 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Web page describing essential guidelines and recommendations for optimal installation of ductless heat pumps in cold climates, ensuring maximum heating performance and long-term satisfaction for homeowners, supported by research-backed insights and detailed resources.

Standard outlining industry procedure for sizing residential duct systems.

Standard providing guidance on how to select, size, and locate the supply air diffusers, grilles and registers, and the return grilles.

Technical manual from ACCA outlining correct methods for zoning of residential HVAC systems.

Fact sheet describing best strategies to bring ductwork on single-story homes with a slab-on-grade foundation in hot, dry climates into the conditioned envelope of the home intending to highlight the pros and cons of multiple ductwork integration strategies, including traditional duct systems in...

Standard for use and reference by designers, architects, engineers, contractors, installers and users for evaluating, selecting, specifying and properly installing flexible duct in heating and air conditioning systems.

Fact sheet describing air-sealing concerns and remedies, including HRV/ERV installation, caulking, spray foam, and weatherstrip installation.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

Standard establishing test methods for determining air leakage in duct systems using fan pressurization in low-rise residential and commercial buildings.

Article describing how demand plumbing systems send cold water back to the water heater until hot water arrives at the sink, shower or other fixture where it is needed.

Website with consumer and contractor information about building codes and regulations for solar water heating systems.

Training manual on how to locate ducts within conditioned space and compact design.

Manual showing duct cleaning contractors how to identify the different types of insulated air ducts, how to open each type for access by cleaning equipment and personnel, how to close and seal openings after cleaning.

This study focuses on the design, construction, and performance of the interior chase approach as implemented by five different builders in Texas, North Carolina, and Florida.

Website providing lists of WaterSense-qualified products for home plumbing and irrigation equipment that meet the requirements of the U.S. Environmental Protection Agency’s (EPA’s) WaterSense program.

A quick guide from the California Division of the State Architect (DSA) explaining the three types of gas shutoff devices to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Information sheet with HVAC duct insulation, testing, maintenance and performance information.

Documents describing Flood Resistant Provisions of the international codes (including the international building, residential, exiting building, mechanical, plumbing, fuel gas, fire, swimming pool and spa, private sewage disposal, and code council performance codes) and summaries of changes from the...

Factsheet describing backflow valve benefits and tips.

Information sheet providing detail about hand fabrication of a one-piece straight duct from a 48" x 120" x 1" thick (1.22 m x 3.05 m x 25 mm) sheet where the total inside duct dimensions equals 112" (2.84 m) or less.

Standard providing a comprehensive approach to evaluating, selecting, specifying and installing flexible duct in HVAC systems.

Website with information for consumers about solar thermal systems for homes.

Website providing certifications and codes for automatic gas shut off valves in the state of California.

Presentation about proper installation of flexible ducts.

Article describing the factors that can lead to inefficient hot water distribution systems in homes.

Standards criteria supporting ICC HVAC duct support standards.

PDF detailing the inspection and verification guidance for WaterSense labeled new homes including indoor and outdoor efficiency requirements, and homeowner and building management education.

Report showing installers how to attach ducts, pipes, and associated equipment to buildings to minimize earthquake damage.

Fact sheet describing principles of insulating steam distribution and condensate return lines as an effective way to prevent energy loss.

Report describing as-found interior platform return plenums, the magnitude of their contribution to the total amount of duct leakage, and techniques and results of retrofits executed by the HVAC trade during equipment replacement.

Factsheet describing how to test the duct leakage of a manufactured home in the manufactured home factory.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow. Results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow; results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Guide providing information on controlling attic ductwork sweating.

Fact sheet describing a novel, simplified air delivery system using a plug-and-play model that features 3-inch diameter flexible ducts, efficient fittings, and a simplified installation process that resulted in successful market engagement through commercialization.

Webpage describing water treatment standards as related to residential drinking water filters.

Table calculating friction losses of PVC pipe fittings.

Table calculating friction losses for PVC pipe by length.

Field manual describing measures to reduce potential hazards and damages caused by and to nonstructural components of a building such as HVAC, appliances, lighting, windows, and furniture during an earthquake.

Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.

Website with information and research about residential hot water distribution systems.