Library

Document illustrating guidelines for efficient installation of interior duct systems in new housing.

Document developed to help residential builders and retrofitters transition from tank-type water heaters to tankless water heaters.

Research study analyzing measured energy savings from a moderate retrofit by comparing post-retrofit performance with measured pre-retrofit monitored data.

Research study outlining results of monitoring a low temperature heat pump.

Standard that prescribes a testing method to determine the efficiency of space heating and/or cooling thermal distribution systems under seasonal and design conditions. This version of the standard was published in the year 2014, and is available for preview and purchase at the reference link. The...

This report investigates whether mini-split heat pumps can live up to their potential for one market segment: multifamily retrofits.

Report on the use of vapor diffusion ports to reduce moisture issues with buried ductwork in unvented attics in hot-humid climates.

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow. Results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Report detailing a three-winter study on unvented roof assemblies in a cold climate, assessing insulation material, ridge diffusion vent presence, vapor control membranes, relative humidity, and interstitial airflow; results indicate that utilizing air-permeable fibrous fill insulations in unvented...

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

Study in which a central heat pump water heater system was monitored in detail and used to create a model for assessing similar systems in various climates.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Database compiling extended capacity data for numerous cold climate heat pump manufacturers and models.

Guide providing information on controlling attic ductwork sweating.

Fact sheet describing a novel, simplified air delivery system using a plug-and-play model that features 3-inch diameter flexible ducts, efficient fittings, and a simplified installation process that resulted in successful market engagement through commercialization.

Document on the development of two simple in-home efficiency test methods that can be used by technicians, researchers, or interested homeowners to verify the correct operation and energy efficiency of a homes air conditioning and heating equipment.

Document about development of recommendations to help residential HVAC designers select optimal supply inlet size and system operating conditions to maintain good thermal comfort in low heating and cooling load homes.

Research study using modeling to determine optimal combination(s) of components/pumps, high efficiency heat sources, plumbing configurations and controls that result in the highest overall efficiency for a hydronic system.

Report describing the key findings from the first third-party field validation of 120-volt heat pump water heater (HPWH) technology, addressing the significant barriers to their adoption and emphasizing their potential role in reducing carbon emissions from residential water heating.

Report describing a laboratory assessment on the performance of Rheem 120-volt heat pump water heaters (HPWH), aimed at identifying optimal installation locations for these new "plug-in" models based on comprehensive testing under various conditions.

DOE case study findings on raised ceiling interior duct systems.

Report including an overview of the buried duct research and information the retrofit methodology used to install and test the three existing duct systems, including short- and long-term data collection.

Fact sheet describing best practices in installing leak-free refrigerant systems, including specifics on creating flare joints and brazed joints, pressure testing, vacuum testing, and charging the system with refrigerant.

Document presenting results from testing prototype HVAC duct system designs that would locate the entire length of duct work within the air and thermal barriers of the building envelope. These include one that incorporated a high-side supply register, one that utilized a single soffit located within...

Report describing information from DOE about rules and standards for residential air conditioners and heat pumps.

Webpage describing a DOE Cold Climate Heat Pump Challenge. The challenge engages industry partners and focuses around the Cold Climate Heat Pumps, a more environmental and efficient heating alternative to traditional heating.

Presentation providing information about correctly installing ductwork in new and existing homes.

Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.

Paper covering a parametric study of foundation heat exchanger-based ground source heat pump systems for several house configurations in a range of European locations, with an emphasis on determining feasible combinations.

Report discussing instrumentation methods and field operation characteristics of two GSHPs in test houses, including a comparison between the manufacturers listed COP values and the COPs calculated from field data.

Research study about a high performance retrofit of an existing brick building (a former convent) into condominiums, all affordable housing.

Report describing procedures for increasing sensible efficiencies through increased flow rates across the air handling unit and increased indoor coil sizes.

This project analyzed combined condensing water heaters or boilers and hydronic air coils to provide high efficiency domestic hot water (DHW) and forced air space heating. Called "combi" systems, they provided similar space and water heating performance less expensively than installing two...

Report about cost effective energy-efficient upgrades that can be implemented in the hot, dry Southwest climate.

Document reviewing current and potential ventilation technologies for residential buildings with particular emphasis on North American climates and construction.

Article explaining the energy cost reduction and other benefits associated with installing a heat pump clothes dryer

Article describing how insulating and air sealing unfinished attic spaces can lead to reduced energy bills in some homes.

Technical study exploring the impact of different installation faults on heat pump performance in a single-family house.

Report describing development of a package of energy efficiency measures to achieve 60% energy savings in a test house.

Website with consumer information about duct cleaning.

Information sheet describing how to select a properly sized water heater based on household usage patterns, peak demand, and heater type—whether tankless, solar, or storage-based—to ensure efficiency and adequate hot water supply.

Manual that identifies certain leakage limits for ducts and outlines procedures for testing ducts for conformity with air leakage limits that are set forth in a designer’s project specification.

Fact sheet describing building envelope performance measures applicable to residential and small commercial construction.

Webpage describing the STEP campaign encouraging the use of smart diagnostic tools to reduce installation faults.

Website providing consumers with resources to find, select and install heat pump water heaters.

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Report addressing barriers to information, contractor resources and cost savings associated with steam balancing multifamily buildings.

Information sheet about buried ducts.

Report providing information based on research and case studies, to remodelers and consumers about opportunities to increase home energy performance.

Report about the impact on the loads when common safety factors are applied to the load calculation process using two houses that meet the 2009 IECC prescriptive path modeled as the accurate baseline.