Library

This study used an advanced airflow, energy and humidity modeling tool to evaluate the potential for residential mechanical pre-scooling strategies to reduce peak electriciy demand.

Article describing moisture and ice dam issues in attics and how to air seal the attic floor.

Website describing the RELi rating system and leadership standard that takes a holistic approach to resilient design.

Technical report describing the research and development of the Ventilation-Integrated Comfort System (VICS) which is a specifically designed, energy-efficient solution that seamlessly integrates with low-capacity, ducted heating, and cooling systems, offering controllable, balanced energy recovery...

Document containing some of the basic characteristics for energy performance, durability, thermal comfort, and indoor air quality that should be met in all high performance homes.

Report proposes high performance duct measures for inclusion in California Title 24 building energy efficiency standards for 2016.

A free tool used to calculate the required minimum flow rate of dwelling-unit ventilation.

IECC code note explaining new fan efficacy requirements, along with how to determine which fans are affected by the new fan requirements.

Website with information and research about residential hot water distribution systems.

Report providing guidance on indoor air quality in single-family and multifamily housing for designers, builders, property managers, homeowners, buyers, and renters.

Fact sheet describing residential tornado safe room doors.

Fact sheet describing methods for flashing and air-sealing windows and doors.

Document reviewing current and potential ventilation technologies for residential buildings with particular emphasis on North American climates and construction.

Q&A article discussing how to address moisture issues in an attic in a wet and humid coastal climate.

Report on hybrid ventilation methods for insulated and sealed crawl spaces.

Document describing precast concrete earthquake design considerations including connections, detailing, and forces, among others.

Website providing an introduction to the concepts and principles of seismic design.

Newsletter containing five articles focused on seismic retrofitting.

Report describing development of a package of energy efficiency measures to achieve 60% energy savings in a test house.

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

A website discussing the use of consumer-grade small electric wind systems such as turbines to lower energy costs.

Fact sheet describing field validations of a smart ventilation system to assess its effectiveness in assisting low-load homes in humid environments by maintaining acceptable indoor humidity conditions while ensuring adequate ventilation and indoor air quality.

Article describing building smoke control systems.

Report identifying the important aspects of building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

A research paper exploring the design, installation, repair and maintenance of solar water and pool heating technologies.

Specifications to assist builders in designing and constructing homes equipped with a set of features that make the installation of solar energy systems after the completion of the home’s construction easier and less expensive.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2016, and is available for...

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings; published in the year 2019, and is available for preview and purchase at the...

Standard that describes the minimum requirements for residential buildings to achieve acceptable indoor air quality via dwelling-unit ventilation, local mechanical exhaust, and source control. This version of the standard was published in the year 2022, and is available for preview and purchase at...

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Standard describing methods for testing the airtightness of buildings and HVAC equipment.

Test method that measures the capture efficiency of wall-mounted domestic range hoods under controlled conditions in a test chambers which available for preview and purchase at the link and was published in the year 2018.

Research study providing a comparison of selected retrofit activity typically done, versus that same retrofit activity approached from an integrated high performance remodeling and quality management perspective.

The 2017 publication update to the SEAOC Wind Committee and SEAOC Solar Photovoltaic Systems Sub-Committee's 2012 report.

Fact sheet describing recommendations for exceeding NFIP regulatory requirements for new construction and for repairs, remodeling, and additions, including building foundations, enclosures below the Base Flood Elevation (BFE), use of nonstructural fill, use of space below the BFE, utilities...

Research study determining how well high performance envelope and innovative cooling system interact to cost effectively reduce cooling energy use in this hot-dry climate.

Presentation on sustainable development including water conservation, passive solar, daylighting, natural ventilation, and land use.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

A guide for homeowners on determining the risks from tornadoes and hurricanes and selecting a safe room type and location, as well as providing detailed plans for safe room construction.

Presentation on urban land use and sustainable building design.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

FSEC certification and testing page for solar systems.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.

Report describing use of the Energy in Modular (EMOD) method to design, produce, and deliver affordable, net-zero energy, low-carbon, and healthier buildings through industrialized (factory) construction of modular buildings; modeling of whole buildings and subassemblies of components, pods, panels...

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Article about installing balanced ventilation systems.

Fact sheet poster describing the energy efficiency and comfort benefits of thin triple-pane windows as compared to standard triple-pane and double-pane windows.

Article describing how an affordable multifamily building achieved energy savings for the same cost as code-minimum construction.

Website providing consumer tips for using natural gas safely in the home, including guidance on cooking, fireplaces, ventilation, pilot lights, piping, etc.