Library

How hard can it be to insulate a flat sheet of concrete? I mean you only have three choices – on the top, on the bottom, or on the edge. OK, you might have some combination of the three as well.

A website discussing the use of consumer-grade small electric wind systems such as turbines to lower energy costs.

Technical report providing site selection guidance for installation of small wind turbines.

Document providing incident solar radiation data and window overhang sizing guidance for multiple locations across the U.S.

Report identifying the important aspects of building design and construction to enable installation of solar photovoltaic and heating systems at some time after the building is constructed.

A research paper exploring the design, installation, repair and maintenance of solar water and pool heating technologies.

Specifications to assist builders in designing and constructing homes equipped with a set of features that make the installation of solar energy systems after the completion of the home’s construction easier and less expensive.

Spreadsheet tool that computes solar reflectance index (SRI) and roof surface temperature based on solar reflectance and thermal emittance using ASTM standard E 1980.

Paper describing landscaping influences on heat gain through shading, infiltration shielding, and microclimate creation for nearby buildings.

Research study providing a comparison of selected retrofit activity typically done, versus that same retrofit activity approached from an integrated high performance remodeling and quality management perspective.

The 2017 publication update to the SEAOC Wind Committee and SEAOC Solar Photovoltaic Systems Sub-Committee's 2012 report.

Paper describing case studies on urban vegetation and greenways and their impacts on city climate and building performance.

Fact sheet describing recommendations for exceeding NFIP regulatory requirements for new construction and for repairs, remodeling, and additions, including building foundations, enclosures below the Base Flood Elevation (BFE), use of nonstructural fill, use of space below the BFE, utilities...

Research study determining how well high performance envelope and innovative cooling system interact to cost effectively reduce cooling energy use in this hot-dry climate.

Presentation on sustainable development including water conservation, passive solar, daylighting, natural ventilation, and land use.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

A guide for homeowners on determining the risks from tornadoes and hurricanes and selecting a safe room type and location, as well as providing detailed plans for safe room construction.

Presentation on urban land use and sustainable building design.

Fact sheet describing best practices for flashing doors and windows to minimize air and water intrusion.

FSEC certification and testing page for solar systems.

Study on the effects of wind, radiation, and pressure on apparent temperature.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.

Report describing use of the Energy in Modular (EMOD) method to design, produce, and deliver affordable, net-zero energy, low-carbon, and healthier buildings through industrialized (factory) construction of modular buildings; modeling of whole buildings and subassemblies of components, pods, panels...

Study comparing the thermal performance of phase change materials to concrete construction during heat waves.

Document describing the impacts of tree cover on property values.

Article from Green Building Advisor on the importance of window selection in hot climates, with an emphasis on window glazing.

Webpage providing guidance on the use of thermal mass with passive heating and cooling strategies.

Technical research paper explaining how thermal mass influences heating and cooling energy needs.

Design guide providing technical information regarding building with thermal mass.

Article detailing a case study in which thermal mass was used as part of an overall Net Zero solution for a university building.

Conference paper describing a proof of concept trial that demonstrated that external roller blinds can reduce heating loads in a room by 20%.

Fact sheet poster describing the energy efficiency and comfort benefits of thin triple-pane windows as compared to standard triple-pane and double-pane windows.

Article describing how an affordable multifamily building achieved energy savings for the same cost as code-minimum construction.

Article from Purdue University on the potential for white paint technology to lower air conditioning usage requirements.

Webpage from the City of Fresno's Water Conservation Program describing household water conservation recommendations, including tips for maintaining evaporative coolers.

Blog article summarizing the effects of extreme heat on air quality and lung health.

Paper describing testing for the first of a series of six near net-zero-energy test houses, using the results to work towards the construction of a true net-zero-energy house.

Training course describing how to incorporate trees into an energy-conserving landscape.

Manual describing scientific, technical, and practical information needed to work with communities on urban forestry, including a section on trees and construction.

Interactive map maintained by the USDA showing plant hardiness zones throughout the U.S.

Webpage describing the use of cool roofs to reduce heat islands and and benefits and costs.

Fact sheet describing the certification requirements for structural design and methods of construction in V Zones; also published in FEMA P-499 “Home Builder’s Guide to Coastal Construction: Technical Fact Sheet Series.”

Products and specification for a State of California-compliant earthquake-actuated automatic gas shutoff valve.

Fact sheet describing how to identify heat-related illness and what actions to take.

Article describing the EPA WaterSense program, process, and benefits.

Fact sheet describing four different efficient hot water delivery (HWD) systems, the trunk-and branch, core, whole-house manifold, and recirculation, with emphasis on system schematics, piping materials, and regulations to design and verify the systems.

Fact sheet describing water-efficient landscaping through informed landscape design and plant selection, outlining considerations for climate, soil, and maintenance, as well as emphasizing the benefits of native and drought-tolerant plants.

Fact sheet describing the implementation of water metering and submetering measures in residential properties, particularly multifamily buildings, to enhance water efficiency, usage tracking, and compliance with relevant regulations; It outlines how to build and verify water meters and submeters to...

Website providing a description of the WaterSense labeled homes program and a checklist of mandatory requirements for homes to be labeled under the U.S. Environmental Protection Agency's (EPA's) WaterSense program, Version 2.0.

Guide designed to help builders better understand and meet the hot water delivery system criteria as specified in EPA's WaterSense New Home Specification.