Library

Information sheet providing guidance about the placement of ventilation approaches.

Blog article describing considerations for how to use trees for shading to reduce cooling energy demand.

Report reviewing the design and the first four months of energy performance of a near zero energy project home in Callaway, Florida during the second half of 2008.

Report reviewing the design of a net zero energy home in Gainesville, Florida and then focusing on the first six months of energy performance of the project home during the second half of 2008.

Document reviewing ventilation strategies for different climate zones that also includes schematic drawings and photographs of various ventilation installations.

This study used an advanced airflow, energy and humidity modeling tool to evaluate the potential for residential mechanical pre-scooling strategies to reduce peak electriciy demand.

Article describing moisture and ice dam issues in attics and how to air seal the attic floor.

Technical report describing the research and development of the Ventilation-Integrated Comfort System (VICS) which is a specifically designed, energy-efficient solution that seamlessly integrates with low-capacity, ducted heating, and cooling systems, offering controllable, balanced energy recovery...

Research study identifying the best performing, most energy-efficient and cost- effective techniques to provide controlled mechanical ventilation and humidity control in hot- humid climates with thermally efficient building envelopes.

A free tool used to calculate the required minimum flow rate of dwelling-unit ventilation.

IECC code note explaining new fan efficacy requirements, along with how to determine which fans are affected by the new fan requirements.

Report providing guidance on indoor air quality in single-family and multifamily housing for designers, builders, property managers, homeowners, buyers, and renters.

Report summarizing the results of laboratory testing of 20 advanced power strip products.

This research paper outlines residential HVAC advanced controls and sensors. It includes a technology review, applications, maintenance and commissioning, occupant behavior and a summary of the state-of-the-art technologies for advanced controls for residential HVAC.

Document reviewing current and potential ventilation technologies for residential buildings with particular emphasis on North American climates and construction.

Q&A article discussing how to address moisture issues in an attic in a wet and humid coastal climate.

Infographic providing details on choosing the right advanced power strip based on your habits to reduce the electricity wasted when your electronic devices are idle.

Report on hybrid ventilation methods for insulated and sealed crawl spaces.

Report describing development of a package of energy efficiency measures to achieve 60% energy savings in a test house.

Fact sheet describing field validations of a smart ventilation system to assess its effectiveness in assisting low-load homes in humid environments by maintaining acceptable indoor humidity conditions while ensuring adequate ventilation and indoor air quality.

Fact sheet outlining the research behind how smart ventilation controls boost energy efficiency and indoor air quality, including research findings from seasonal temperature, timer, and real-time weather-based controls showing that all three systems showed potential for energy savings while...

Article describing building smoke control systems.

Specifications to assist builders in designing and constructing homes equipped with a set of features that make the installation of solar energy systems after the completion of the home’s construction easier and less expensive.

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. This version of the standard was published in the year 2016, and is available for...

Standard that defines the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings; published in the year 2019, and is available for preview and purchase at the...

Standard that describes the minimum requirements for residential buildings to achieve acceptable indoor air quality via dwelling-unit ventilation, local mechanical exhaust, and source control. This version of the standard was published in the year 2022, and is available for preview and purchase at...

This Standard provides a consistent, uniform methodology for evaluating the airtightness of building envelopes and heating and cooling air ducts and the air flows of mechanical ventilation systems.

Standard describing methods for testing the airtightness of buildings and HVAC equipment.

Test method that measures the capture efficiency of wall-mounted domestic range hoods under controlled conditions in a test chambers which available for preview and purchase at the link and was published in the year 2018.

This document covers a description of the need and applied solutions for supplemental dehumidification in warm-humid climates, especially for energy efficient homes where the sensible cooling load has been dramatically reduced.

Presentation on sustainable development including water conservation, passive solar, daylighting, natural ventilation, and land use.

Presentation by the Washington University in St. Louis Office of Sustainability on saving energy.

Presentation on urban land use and sustainable building design.

DOE-sponsored report describing the experimental design and results of testing the energy performance of Hunter Douglas double-cell cellular shades under various control schemes in the Pacific Northwest National Laboratory’s Lab Homes.

Presentation describing how to make a Corsi-Rosenthal Box for air cleaning.

Article describing a field study that test ventilation performance in nine homes and found current ventilation was inadequate to remove PM2.5 and CO2 levels; however, a directly exhausting range hood can reduce peak PM2.5 concentrations by 75% or more.

Paper that illustrates a performance check between the thermal performance of a Massive Insulating Concrete Form (ICF) wall system mocked up and Whole Building Performance criteria such as total space heating and cooling loads (thermal comfort).

Article about installing balanced ventilation systems.

Guide from Energy Star on smart thermostats and offering some guidance for choosing one.

This report describes the results of a multiyear research project that investigated the energy savings attributable to thermostatic radiator valves (TRVs) installed on one-pipe steam distribution systems.

Report on a project conducted to better understand the current usage of thermostatic radiator valves by key market players in steam and hot water heating and to conduct limited experiments on the effectiveness of new and old thermostatic radiator valves as a means of controlling space temperatures...

Website providing consumer tips for using natural gas safely in the home, including guidance on cooking, fireplaces, ventilation, pilot lights, piping, etc.

BSD-102 report providing guidance about whether to construct a vented or unvented attic based on hygro-thermal zone.

Article describing the impact of increasingly stringent ventilation standards on multifamily buildings, highlighting the inefficiencies and challenges of exhaust-only ventilation in tightly sealed enclosures, the complications of achieving balanced ventilation, and the unintended consequences of...

This study uses a computer simulation approach to examine the energy and indoor air quality implications of passive and hybrid ventilation systems.

Document presenting analysis results, focusing on relative humidity (RH) excursions, which are defined as unique events of indoor RH above a threshold.

Report summarizing results from a study in Massachusetts that aimed to upgrade existing homes and incorporate solar thermal systems.

Preliminary results of two monitored lab homes constructed to represent the thermal characteristics of typical existing Florida homes are presented.

Building science report describing issues with vented attics in hot-humid climates and how sealed attic construction may be a solution.

A review on the knowledge about ventilated wall claddings from field performance and hydrothermal modeling.