Library

Report investigating implemention of advanced power strips for entertainment and home office electronics would reduce energy consumption across the residential market.

Technical report describing the SPS (Structural Panel System), an innovative implementation of the "perfect wall" concept, situating environmental control layers on the exterior side of structural components for improved constructability, cost-effectiveness, and performance, validated through the...

Website reporting efficiencies for dehumidifiers, room air conditioners, and room air cleaners that are tested by independent laboratories and reported by the Association of Home Appliance Manufacturers.

Technical report describing how the FSEC Energy Research Center explores low-cost space-conditioning upgrades for existing homes by integrating centrally located, high-efficiency ductless mini split heat pumps with older but functional central space conditioning systems, aiming to achieve energy...

Report with updated energy consumption data for 28 residential & commercial miscellaneous electric loads (MELs), including projections to 2040.

Article by the Canadian Government on attic ventilation and considerations for moisture and ice dams.

Report covering interior energy retrofits of masonry buildings.

Document focusing on the design and wall components that contribute to a pressure equalized rain screen wall, including the frequency of the weep holes and other brick masonry rain screen wall requirements.

Web based tool providing decision-making guidance for selecting wall assembly components.

Article describing the principle of capillarity in construction materials.

Article describing customer tip sheet and how ceiling fans are one of the most popular and generally well regarded of all home energy efficiency features.

Part 2 of an article discussing how to maximize two-pipe steam systems for resident space heating.

Article describing how closed crawlspaces can do "double duty" by controlling moisture and providing energy savings.

Guidance from Zero Energy Project on construction techniques for warmer climates, such as home orientation, and insulation requirements.

Article about how mortar droppings during the installation of a brick veneer can clog the weep holes in the wall assembly causing moisture damage. The article also illustrates products that can be installed in the ventilated cavity to mitigate this problem.

Standard covering requirements for the assembly, installation, maintenance, and operation of controls and safety devices on automatically operated boilers directly fired with gas, oil, gas-oil, or electricity, having fuel input ratings under 12,500,000 Btu/hr.

Report covering exterior energy retrofits of masonry buildings.

Technical report describing algorithms that use communicating thermostat heating data and that were developed to optimize customer adoption of energy conservation measures, enhancing the identification of retrofit opportunities, estimating post-retrofit energy savings, and enabling home-specific...

The main principle of smart ventilation used in this study is to shift ventilation from time periods with large indoor-outdoor temperature differences, to periods where these differences are smaller, and their energy impacts are expected to be less.

Fact sheet describing drip irrigation for landscaping.

Website for finding policies and incentives by state for renewables and efficiency.

Report describing an investigation into multiple occupancy-based ventilation control strategies and the associated energy savings.

Website describing analyses for products and standards affecting home heating, cooling, and appliances, in regards to technical, economical, and energy efficiency pathways.

Article by Energy Saver on how to save energy with your thermostat.

Website providing consumer information about ceiling fans, including specifications and buying guidance.

DOE-sponsored report describing the experimental setup and results of field studies on using interior cellular shading attachments to reduce solar heat gain in summer and reduce heat loss in winter.

DOE-sponsored report describing the experimental setup and results of field studies on using exterior fabric shading attachments to reduce solar heat gain, reduce glare, and improve comfort.

Report that demonstrates the durability, constructability, and cost-effectiveness of the extended plate and beam (EP&B) wall system for new construction housing projects in compliance with the International Energy Conservation Code, addressing moisture risk management and high-performance envelope...

Article describing five fundamental changes to building construction from the last 50 years and their modern construction consequences.

Webpage describing homeowner resources program designed to strengthen homes and commercial buildings against severe weather such as high winds, hail, hurricanes, and even tornadoes.

Webpage providing basic information on various types of heat pumps and their applications in Massachusetts.

A starting point for ballparking and comparing the cost of different siding materials and a brief overview of the pros and cons of different siding materials.

Article describing how omission of two small but critical wall details, a kick-out flashing and a weep screed, lead to extensive water damage to a wall.

Article describing how to use radiator inlet orifices optimize two-pipe steam heating systems.

Guide detailing best practices on how to build wall assemblies with absorptive claddings such as brick, stone that drain and dry well.

Article describing walls and moisture development on them.

Report on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

Guidance on performance of current diagnostics as well as a draft test method for use in future air flow evaluations.

Webpage featuring hundreds of illustrations of masonry construction details for brick, congrete, stone, tile, stucco, etc.

Siding installation guide for Ply Gem Siding Group products.

Report describing a lighting and smart power strip retrofit evaluation that was conducted on 56 all-electric, existing Florida homes to see how lighting and miscellaneous electric loads might be reduced.

Article describing how moisture accumulates inside of structures and issues that result.

Website providing guidance about mold and moisture for homes, schools, multifamily and commercial buildings.

Online course providing an overview of mold prevention and mold remediation.

Article describing mulch requirements and benefits.

Building science insight into crawlspaces.

Fact sheet from Wisconsin Focus on Energy explaining how to prevent future ice dams on homes by learning about their formation and mitigation of contributing factors.

List of recommendations from IBHS on how to protect homes from ice dam formation.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.