Library

Online course describing mold and mold remediation for environmental and public health professionals.

Online course providing an overview of mold prevention and mold remediation.

Worker guidance from EPA, HUD, NIH, and OSHA on how to deal with mold in homes following natural disasters.

Conference paper making the case that moving ducts to conditioned space saves energy, is practical for production builders (when accompanied by careful pre-planning), and creates significant andmarketable energy savings for homebuyers.

Standard containing requirements for carbon monoxide (CO) detection and warning equipment intended to protect lives by warning occupants of the presence of CO in sufficient time to allow occupants to escape or take other appropriate action.

Report highlighting the evaluation methods used and extent of wind washing found in a study analyzing wind washing in thirty-two two-story homes.

Standards for paints and coatings.

American Lung Association web page providing information on particulate matter and indoor air quality.

Article describing particulate matter (PM), what it is, how it can be harmful, and what can be done about it.

Website describing particulate matter (PM) pollution.

Standards for requirements, performance, construction, workmanship and others for structural-use panels.

Manual describing design, detailing, material selection and troubleshooting for plaster, IEFs, and drywall, with information on continuous insulation, air barriers, rain screens, and ratings for fire and sound.

Article describing how to properly manage condensing HVAC equipment.

Website from the EPA containing information for homeowners and renters about how to identify asbestos in the home and how to deal with it to reduce exposure to it.

Website with information about radon-resistant construction techniques and other radon resources for builders, contractors and homebuyers.

Worker guidance from EPA, HUD, NIH, and OSHA for radon issues following a natural disaster.

Website providing information about how to keep the properties rat-free and address conditions that can lead to rats.

Website serving as a national public service campaign designed to educate and empower the American people to prepare for, respond to and mitigate emergencies, including natural and man-made disasters.

A website explaining the benefits of recycling compact fluorescent lightbulbs and how the process can prevent the release of mercury into the environment.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

Report providing information on mechanical air-cleaning devices for ventilation when conventional methods are not warranted.

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2001 and revised in...

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2017 and revised in...

Report providing guidance on indoor air quality in single-family and multifamily housing for designers, builders, property managers, homeowners, buyers, and renters.

Fact sheet describing methods for flashing and air-sealing windows and doors.

Website providing information about how to prevent rodent entry in homes.

Factsheet from HUD describing how homeowners can retrofit homes following natural disasters in the U.S. Virgin Islands.

Factsheet from HUD describing how to rebuild following natural disasters in Puerto Rico.

Factsheet for builders from HUD on how to rebuild homes following natural disasters in the U.S. Virgin Islands.

Guidance from HUD on how to restore homes following natural disasters in Puerto Rico.

Guidance from HUD on how to restore homes following natural disasters in Puerto Rico.

High-density sidewall cavity insulation can be a major comfort and savings boost. It saves energy by slowing both conductive and convective losses, but only if the right things are done and done right. This always requires site-specific thinking.

Initiatives of smoke-free housing policies in New York State.

Toolkits for residents and owner/managers who live and work in federally assisted housing.

California Energy Commission report presenting the concept of cool walls and providing guidelines for their building- and climate-appropriate use to conserve energy and reduce emissions.

Job Process sheet for the manufactured housing industry showing how to split and notch insulation batts to fit around electrical boxes and wiring in a factory production environment.

Standard describing a simple, relatively cost-effective approach to evaluating the ability of a variety of materials to support microbial growth using a small chamber method. A preview of the standard is available at the link, with the full version available for purchase.

Standard describing methods for installing radon mitigation systems in existing residential buildings three stories or less in height which was published in the year 2021 and is available for preview and purchase at the reference link.

Detailed requirements for testing, exposure modeling, and allowable limits for modeled indoor air concentrations.

Standard describing a test method measuring air-leakage rates through a building envelope under controlled pressurization and de-pressurization which was published in the year 2019 and is available for preview and purchase at the reference link.

Standard that describes the principles for the design of a hot box apparatus and the minimum requirements for the determination of steady state thermal performance of building assemblies when exposed to controlled laboratory conditions. The current version of the standard was published in 2019, and...

Standard describing two techniques for measuring air leakage rates through a building envelope in buildings that may be configured to a single zone which was published in the year 2022 and is available for preview and purchase at the reference link.

Website providing information on all types of pest management for multi-family housing.

Information sheet describing correct application of stucco.

Document with information on preventing termites when using ICFs.

Document providing an overview of the Thermal Bypass Checklist for the ENERGY STAR Qualified Homes program.

Guide describing details that serve as a visual reference for each of the line items in the Thermal Enclosure System Rater Checklist.

Report sumarizing a workshop to initiate a professional discussion about eventual benefits of the application of massive technologies in US buildings.

BSD-102 report providing guidance about whether to construct a vented or unvented attic based on hygro-thermal zone.

Report focusing on the performance and durability of unvented-cathedralized attics in hot-humid climates with both tile and asphalt shingle roofing.