Library

2009 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

2012 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

Code set from IAPMO explaining plumbing standards. 2018 publication.

State building code containing general building design and construction requirements relating to fire and life safety, structural safety, energy efficiency, and access compliance; based on the 2021 International Building Code.

Report assessing building codes for the 18 Atlantic and Gulf coast states which are most prone to hurricanes, as of 2018.

Webpage providing guidance on the 45L tax credit, assembling the most relevant information for Northwest builders to maximize their tax credit and build energy efficient homes.

Standard outlining materials and installation methods by using commercial building wraps.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

Report providing product manufacturers, fabricators, contractors and installers, design professionals, owners, and real estate developers with technical performance and cost guidance for scalable zero-carbon-aligned new construction pathways and retrofit packages to achieve zero carbon retrofits and...

Voluntary specification for residential, commercial/multifamily, and industrial water heaters and heating systems.

Wepage by ABBA providing standards concerning air barrier assemblies, divided into building assemblies for walls, roofs and foundations and sub-divided into specific types of walls, roofs and foundations. Air barrier assemblies are made up of air barrier materials and connected with air barrier...

Webpage containing technical manuals and standards from ACCA, covering design, installation and maintenance for residential and light commercial HVAC systems and providing technical guidance in the indoor environment industry.

Wepage containing links to door standards from the Builders Hardware Manufacturers Association addressing a range of features and characteristics of doors.

This specification specifies the test method for measuring heat flow through building assemblies or components.

This specification requires that insulated vinyl siding demonstrate a thermal insulation value of R-2.0 or greater. The specification also establishes other performance requirements and test methods including materials properties and dimensions, warp, shrinkage, impact strength, expansion...

Webpage showing standards developed by ASHRAE that define the roles of and minimum requirements for mechanical and natural ventilation systems and the building envelope intended to provide acceptable indoor air quality in low-rise residential buildings. Additional technical guidance is provided on...

Web-based mapping tool offering a fast, reliable way to look up key design parameters specified in Standard ASCE 7-10, 7-16, or 7-22 for a specific address or location which is free to use and can look up data for eight different environmental hazard types: wind, tornado, seismic, ice, rain, flood...

Report examining the cost differences between a typical home and a home constructed using wildfire-resistant materials and design features.

Subprogram of the California Statewide Codes and Standards Program designed to help cities and counties to adopt above-state-code ordinances.

A website explaining the various shades of light, from warm to cool colors, with a visual diagram illustrating the various shades of light.

List of commercial heat pump water heater systems that comply with NEEA's Advanced Water Heating Specification.

Technical bulletin addressing surfacing options in regards to composite wood panels and their emission barrier capabilities.

A quick guide from the California Division of the State Architect (DSA) explaining the three types of gas shutoff devices to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Website to support the state of Vermont transition to a more affordable and cleaner future by affiliate with partners throughout Vermont to save customers money, strengthen our state’s economy, and lower carbon emissions.

U.S. Code of Federal Regulations energy and water conservation standards for consumer products including home appliances and HVAC equipment.

ENERGY STAR website outlining the program requirements for NextGen, an EPA initiative aimed at advancing energy efficiency in residential construction.

Website showing compliance timelines for various versions of the ENERGY STAR Single-Family New Home program requirements with links to national program requirements documents and checklists.

Handbook to help property owners understand the rules, procedures, standards, and criteria that apply to the environmental resource permit (ERP) program under Part IV of Chapter 373 of the Florida Statutes.

Section 608 establishes EPA’s National Recycling and Emission Reduction Program designed to reduce emissions related to maintaining, servicing, repairing, and disposing of air conditioning or refrigeration equipment.

U.S. Code describing excess flow valve installation requirements.

Document discussing methods to bioengineer stabilization of shorelines using living and non-living plant materials in combination, known as the “Living Shorelines” concept.

A website providing information on funding for mitigation programs to reduce disaster losses under FEMA's Hazard Mitigation Grant Program.

Webpage containing links to all editions of the Florida Building Code.

Document describing the emissions criteria for carpets, cushions, and adhesives to qualify as those with low volatile organic compound (VOC) emissions under the Carpet and Rug Institute's Green Label Plus Indoor Air Quality Testing Program.

Webpage describing federal regulation related to excess flow valves on residential natural gas lines.

Website describing ways to prevent home house fires.

Website with articles on home ventilation and indoor air quality.

Website providing the technical specifications and related documents for home builders, subcontractors, architects, and other housing professionals interested in certifying a home to the EPA's Indoor airPLUS program requirements.

2017 version of a standard covering requirements for single- and dual-pane windows, glazed side-hinged door systems, sliding doors, tubular daylighting devices, and unit skylights developed jointly by the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association...

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

Code providing minimum safety requirements for the design and installation of fuel gas piping systems in homes and other buildings.

A document providing guidance on integrating a PV array with a roof system.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2017 and revised in...

Research report detailing Florida Solar Energy Center (FSEC) partnership with Manatee County Habitat for Humanity to design a compact, Zero Energy Ready Home in Florida, tackling challenges like equipment sizing and indoor air quality, offering insights for projects surpassing building code...

Website providing a link for purchasing NFPA 703, Standard for Fire Retardant—Treated Wood and Fire–Retardant Coatings for Building Materials.

Website providing a link for purchasing NFPA 1144, Standard for Reducing Structure Ignition Hazards from Wildland Fire.

Standard specification covering the properties of a cured single- or multicomponent cold-applied elastomeric joint sealant for sealing, caulking, or glazing operations on buildings, plazas, and decks for vehicular or pedestrian use, and types of construction other than highway and airfield pavements...

Test method that measures the capture efficiency of wall-mounted domestic range hoods under controlled conditions in a test chambers which available for preview and purchase at the link and was published in the year 2018.

The Standard Work Specifications (SWS) are a tool for industry guidance to ensure effective, durable, and safe work is performed during home upgrades.