Library

2009 edition of code establishing a baseline for existing building retrofits to reach appropriate safety levels under new construction requirements covered in other ICC codes.

2009 edition of code establishing regulations involving life and property safety from fires and explosion hazards, including emergency planning, fire department access and water supply, automatic sprinkler systems, fire alarms, and hazardous materials planning and storage.

2009 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

A guide about the above code residential home certification called Earth Advantage and required and optional measures available to meet the point requirements for certification.

2012 edition of code establishing minimum regulations for plumbing facilities, including fixtures, water heaters, water supply and distribution, sanitary drainage, storm drainage, etc.

A supplement to the 2012 Florida Building Code on energy efficiency and conservation.

Code set from IAPMO explaining plumbing standards. 2012 Publication.

Code set from IAPMO explaining plumbing standards. 2018 publication.

This Standard establishes the minimum requirements to evaluate a residence with regards to energy efficiency, water conservation, occupant comfort, and indoor air quality.

Standard covering updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards—Metal & Flexible, duct leakage test procedures; includes recommendations on use of leakage testing, types of test apparatus, and test setup and sample leakage analysis.

Report examining the cost differences between a typical home and a home constructed using wildfire-resistant materials and design features.

Website with consumer and contractor information about building codes and regulations for solar water heating systems.

Fact sheet describing changes made to the 2010 Florida Building Code with regards to wind design loads and requirements.

Report describing the analytical study of renewable energy retrofits to homes built before 1980 and whether it is cost efficient or not.

A quick guide from the California Division of the State Architect (DSA) explaining the three types of gas shutoff devices to stop the flow of natural gas into buildings in the event of an earthquake or rupture of the gas line.

Handbook to help property owners understand the rules, procedures, standards, and criteria that apply to the environmental resource permit (ERP) program under Part IV of Chapter 373 of the Florida Statutes.

Document discussing methods to bioengineer stabilization of shorelines using living and non-living plant materials in combination, known as the “Living Shorelines” concept.

Webpage describing federal regulation related to excess flow valves on residential natural gas lines.

Website with articles on home ventilation and indoor air quality.

Website providing the technical specifications and related documents for home builders, subcontractors, architects, and other housing professionals interested in certifying a home to the EPA's Indoor airPLUS program requirements.

2017 version of a standard covering requirements for single- and dual-pane windows, glazed side-hinged door systems, sliding doors, tubular daylighting devices, and unit skylights developed jointly by the American Architectural Manufacturers Association (AAMA), the Canadian Standards Association...

A presentation describing the standards regarding who is responsible for what part of the design to ensure the roof truss is properly designed and braced.

A document providing guidance on integrating a PV array with a roof system.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

IECC code note explaining new fan efficacy requirements, along with how to determine which fans are affected by the new fan requirements.

Presentation describing RESNET grading criteria for insulation installation.

Website providing a link for purchasing NFPA 703, Standard for Fire Retardant—Treated Wood and Fire–Retardant Coatings for Building Materials.

Website providing a link for purchasing NFPA 1144, Standard for Reducing Structure Ignition Hazards from Wildland Fire.

Standard specification covering the properties of a cured single- or multicomponent cold-applied elastomeric joint sealant for sealing, caulking, or glazing operations on buildings, plazas, and decks for vehicular or pedestrian use, and types of construction other than highway and airfield pavements...

Test method that measures the capture efficiency of wall-mounted domestic range hoods under controlled conditions in a test chambers which available for preview and purchase at the link and was published in the year 2018.

Standard covering minimum required health and safety diagnostics and specifications for BPI's Building Analyst Professional certification.

NAFA’s user guide for understanding ANSI/ASHRAE Standard 52.2-2012.