Library

This report requires all elements of rooftop PV panel systems to be designed for component and cladding pressures per ASCE 7-10.

RESNET standards aimed to ensure that accurate and consistent home energy ratings are performed by accredited home energy rating providers through their raters nationwide.

NABCEP main webpage.

Link to the flood plain management criteria section in the latest version of the National Flood Insurance Program (NFIP)

Resources describing the National Flood Insurance Program's technical bulletins for flood zone construction, including foundation walls, corrosion protection, floodproofing, and breakaway walls among other topics.

This report is designed to meet ASHRAE 62.2-2010/2013 and ANSI/ACCA’s 5 QI-2015 protocol, thereby improving the performance of HVAC equipment in new homes when compared to homes built to minimum code.

Report describing the interactions, both positive and negative, between common green building practices and the robustness of residential buildings to withstand natural hazards.

An interactive website providing facts on new, single-family homes constructed in 2019.

A list of EPA federal regulations regarding stationary sources of air pollution.

Link to the NFPA standards collection; NFPA 211 provides guidelines for construction projects involving chimneys, fireplaces, venting systems, and solid fuel-burning appliances.

Standard for installing manufactured homes, including specifications and procedures, for installation of utility connections of a manufactured home.

Code providing minimum safety requirements for the design and installation of fuel gas piping systems in homes and other buildings.

This standard provides a benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards and has been adopted in all 50 states.

Standard providing a procedure for determining fenestration attachment product U-factors.

Standard for determining fenestration attachment product SHGC and visible transmittance.

Document providing supplemental information for code enforcement professionals about headers in nonbearing walls.

A document providing guidance on integrating a PV array with a roof system.

Website to access Oregon state specialty code. Chapter 11 contains requirements concerning energy efficiency measures in residential buildings.

Standards for paints and coatings.

Standards for requirements, performance, construction, workmanship and others for structural-use panels.

This CASE report proposes updates and revisions to the standards for residential swimming pool filtration pumps, new and replacement single phase pump motors under 5 horsepower (HP), controllers, portable electric spas as well as expanding the scope of the current standards to include light emitting...

Report documenting actual energy savings of a retrofit project in Boulder, CO.

Fact sheet poster describing an online tool offered within the Building America Solution Center which provides construction guidance for builders and contractors in building and renovating homes to be more resistant to natural disasters such as hurricanes, flooding, earthquakes and wildfires, etc.

Webpage describing the Quality Install Tool, an open-source web app designed to simplify, standardize, and expedite the creation of high-quality installation documentation for HVAC installations and efficiency upgrades.

Standard providing information on contractors who offer radon control services to homeowners.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Article describing key takeaways from two symposia held during Building Innovation 2016: The National Institute of Building Sciences Fourth Annual Conference and Expo, including that resilience can be affordable and cost-effective.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

Fact sheet describing an alternative to piles in V Zones and A Zones in coastal areas where soil properties preclude pile installation, but the need for an “open foundation system” still exists and recommendations for good masonry practices in coastal environments; also published in FEMA P-499 “Home...

Website describing the RELi rating system and leadership standard that takes a holistic approach to resilient design.

Table in the IRC describing bracing requirements for specified wind speeds and building story locations.

Webpage containing downloadable fact sheets covering carpet-related topics including Indoor Air Quality, Asthma and Allergy, Cleaning Products, and Environmental Sustainability.

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2001 and revised in...

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2017 and revised in...

Report describing information from DOE about rules and standards for residential air conditioners and heat pumps.

A free tool used to calculate the required minimum flow rate of dwelling-unit ventilation.

IECC code note explaining new fan efficacy requirements, along with how to determine which fans are affected by the new fan requirements.

A fact sheet educating homeowners on the importance of residential safe rooms, including their cost and how to register a safe room with local officials.

Website providing resources for seismic retrofits for builders and homeowners as well as city permit requirements from the City of Portland OR.

Fact sheet describing residential tornado safe room doors.

Website describing the USRC, which "brings an unparalleled level of capability to the mission of improving community resilience in the built environment."

Website providing resilient housing articles that relate to codes, including webinars, training, and guest articles.

Webpage with guidance document detailing voluntary interim guidelines for conducting home energy ratings on multifamily residential buildings.

Presentation describing RESNET grading criteria for insulation installation.

Software enabling low-carbon planning, implementation, monitoring and reporting.

This report discusses proposed updates to the pool pumps and motors, and portable electric spas standards in the Appliance Efficiency Regulations (California Code of Regulations, Title 20, Sections 1601 to 1609). These proposed updates are part of the 2012 Appliance Efficiency Rulemaking, Phase I...

A CD guide intended to help communities mitigate damage or loss from tornadoes and other extremewind events, and provide public information resources for conveying the importance of safe room construction.