Library

Standard providing a procedure for determining fenestration attachment product U-factors.

Standard for determining fenestration attachment product SHGC and visible transmittance.

Document describing recommended modeling rules, potential compliance credits, and eligibility criteria for residential night ventilation cooling systems for California’s Title 24 energy efficiency standards.

Newsletter providing news and information to members of the New Jersey National Guard.

Document providing supplemental information for code enforcement professionals about headers in nonbearing walls.

A document providing guidance on integrating a PV array with a roof system.

Website to access Oregon state specialty code. Chapter 11 contains requirements concerning energy efficiency measures in residential buildings.

Standards for paints and coatings.

Article from Smarter Homes NZ on home building techniques that incorporate passive cooling.

Book describing passive cooling techniques from a technical and academic perspective.

This study evaluated 11 measures for passive cooling using four heat resilience metrics with and without grid power in Fresno CA and found the two most effective measures were installing solar-control window films and adding roof insulation; natural ventilation also helped reduce overheating in...

Website providing guidance on passive heating, cooling, and lighting methods.

Article from Williams College on the key elements of passive solar design for homes.

Paper describing a study on savings in peak power and cooling energy for homes with shade trees.

Paper summarizing passive and low-energy cooling systems for buildings.

Standards for requirements, performance, construction, workmanship and others for structural-use panels.

Brochure describing what permeable pavement is, where to install it, and how to maintain it.

Report providing information on performance of mortars and concrete containing PCMs.

Blog article describing considerations for how to use trees for shading to reduce cooling energy demand.

City of Plymouth webpage providing information on the Plymouth Community Center Project.

This CASE report proposes updates and revisions to the standards for residential swimming pool filtration pumps, new and replacement single phase pump motors under 5 horsepower (HP), controllers, portable electric spas as well as expanding the scope of the current standards to include light emitting...

Large scale simulation study investigating the effects of cool roofs and walls on buildings of various vintages across the U.S., with special attention given to California.

Report documenting actual energy savings of a retrofit project in Boulder, CO.

Database describing FEMA preparedness webinars including natural hazard preparedness.

Fact sheet poster describing an online tool offered within the Building America Solution Center which provides construction guidance for builders and contractors in building and renovating homes to be more resistant to natural disasters such as hurricanes, flooding, earthquakes and wildfires, etc.

Fact sheet describing analysis of potential heating and cooling savings from radiant barriers in attics.

Standard providing information on contractors who offer radon control services to homeowners.

An example of a form a building codes department created to ensure builders are fully aware and have taken steps to provide drainage so that water doesn’t accumulate behind siding. This example is from the city of Newberg, Oregon.

Searchable database of over 3,000 roofing products that have undergone solar reflectance and thermal emittance testing.

Searchable database of wall cladding and coating products that have undergone solar reflectance and thermal emittance testing.

Article describing key takeaways from two symposia held during Building Innovation 2016: The National Institute of Building Sciences Fourth Annual Conference and Expo, including that resilience can be affordable and cost-effective.

Guide describing ways builders can block off entry points and otherwise make homes inhospitable to all manner of pests.

Report from FEMA on how to reduce damage from localized flooding including planning, drainage, building codes and retrofits, and regulations.

Research project aimed to verify whether homes in the New Jersey HPwES program achieved 30% source energy savings, and if so, what measures were implemented to achieve them.

Guidance document describing urban heat islands, what they are, how they form, why we care, and including some strategies to reduce them.

Fact sheet describing an alternative to piles in V Zones and A Zones in coastal areas where soil properties preclude pile installation, but the need for an “open foundation system” still exists and recommendations for good masonry practices in coastal environments; also published in FEMA P-499 “Home...

Website describing the RELi rating system and leadership standard that takes a holistic approach to resilient design.

Table in the IRC describing bracing requirements for specified wind speeds and building story locations.

Webpage containing downloadable fact sheets covering carpet-related topics including Indoor Air Quality, Asthma and Allergy, Cleaning Products, and Environmental Sustainability.

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2001 and revised in...

Standard covering provisions for electrically operated single- and multiple-station carbon monoxide (CO) alarming devices used in various types of residential occupancies to protect against acute effects of exposure to CO. This version of the standard, originally published in 2017 and revised in...

Report describing information from DOE about rules and standards for residential air conditioners and heat pumps.

IECC code note explaining new fan efficacy requirements, along with how to determine which fans are affected by the new fan requirements.

Report describing a study using parametric computer simulations of 112 single-family and 63 multi-family residential building prototypes to quantify the contributions of building components such as roofs, walls, windows, infiltration, outside air, lighting, equipment, and people to the aggregate...

A fact sheet educating homeowners on the importance of residential safe rooms, including their cost and how to register a safe room with local officials.

Website providing resources for seismic retrofits for builders and homeowners as well as city permit requirements from the City of Portland OR.

Fact sheet describing residential tornado safe room doors.

Website describing the USRC, which "brings an unparalleled level of capability to the mission of improving community resilience in the built environment."

Website providing resilient housing articles that relate to codes, including webinars, training, and guest articles.